Article
Licensed
Unlicensed
Requires Authentication
Novel Dual-band Slot Antenna Design for Bluetooth and UWB Applications
-
Hai-Yan Huang
,
Wei Shao
Published/Copyright:
April 3, 2014
Abstract
A novel technique to introduce an additional low frequency band to compact ultra wideband (UWB) slot antennas is proposed in this paper. To get an additional Bluetooth band, a parasitic strip is mounted on the back side of the slot edge. Because of the interaction of the strip and the slot edge, the Bluetooth band can be obtained while a notch band between the Bluetooth band and UWB band also appears. Two types of feeding, coplanar waveguide and microstrip line, are investigated. The proposed antennas are both fabricated on a low-cost FR4 substrate and have compact size (24 mm × 28 mm × 1 mm). The good agreement between measured and simulated results verifies our design.
Received: 2013-9-24
Published Online: 2014-4-3
Published in Print: 2014-5-31
©2014 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Design of Cavity-Backed Wideband Circularly Polarized Multi-Feed Slot Antenna and its Array
- Dual Polarized Notch-etched Circular Patch Antenna Loaded with Metamaterial Structure
- Novel Dual-band Slot Antenna Design for Bluetooth and UWB Applications
- A Triple-band Bandpass Filter using Tri-section Step-impedance and Capacitively Loaded Step-impedance Resonators for GSM, WiMAX, and WLAN systems
- A Differential CMOS Common-Gate LNA Linearized by Cross-Coupled Post Distortion Technique
- A Wideband Noise-canceling CMOS LNA Using Cross-coupled Feedback and Bulk Effect
- Simulation Model for DVB-SH Systems Based on OFDM for Analyzing Quasi-error-free Communication over Different Channel Models
- Resource Allocation with Dynamic Carrier Assignment in Wireless Networks
- Performance Analysis of Two-Way OFDM Relay Systems with Ordered Subcarrier Pairing
- Stackelberg Game Based Power Allocation for Physical Layer Security of Device-to-device Communication Underlaying Cellular Networks
Articles in the same Issue
- Frontmatter
- Design of Cavity-Backed Wideband Circularly Polarized Multi-Feed Slot Antenna and its Array
- Dual Polarized Notch-etched Circular Patch Antenna Loaded with Metamaterial Structure
- Novel Dual-band Slot Antenna Design for Bluetooth and UWB Applications
- A Triple-band Bandpass Filter using Tri-section Step-impedance and Capacitively Loaded Step-impedance Resonators for GSM, WiMAX, and WLAN systems
- A Differential CMOS Common-Gate LNA Linearized by Cross-Coupled Post Distortion Technique
- A Wideband Noise-canceling CMOS LNA Using Cross-coupled Feedback and Bulk Effect
- Simulation Model for DVB-SH Systems Based on OFDM for Analyzing Quasi-error-free Communication over Different Channel Models
- Resource Allocation with Dynamic Carrier Assignment in Wireless Networks
- Performance Analysis of Two-Way OFDM Relay Systems with Ordered Subcarrier Pairing
- Stackelberg Game Based Power Allocation for Physical Layer Security of Device-to-device Communication Underlaying Cellular Networks
