Synthesis and characterization of high molecular weight and low dispersity polystyrene homopolymers by RAFT polymerization

Articles in the same Issue

1. Toughening of glass fiber reinforced Nylon 66 with EPDMMAH: Dynamic mechanical, rheological, and morphological investigations
2. Preparation and characterization of exfoliated nanocomposite prepared by vinyl acetate, montmorillonite and dioctadecyl dimethyl ammonium bromide
3. Effects of organoclay on morphology and mechanical properties in acrylonitrile-butadiene-styrene/polyamide 6/ organoclay ternary nanocomposites
4. Synthesis and characterization of poly(St-co-DVB)/montmorillonite nanocomposites by suspension polymerization
5. Dual phase continuity and phase inversion phenomena in natural rubber/ethylene vinyl acetate (EVA) copolymer blends
6. Mechanical characterization of rigid π-conjugated polymer on a nanometer scale through nanoindentation
7. Powder X-ray diffraction and thermal decomposition correlation studies of nano-crystalline styrene-maleic anhydride graft copolymer-ZnO composites
8. Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part I: Effects of concentration on morphology, liquid crystallinity and thermal properties
9. Influence of hydrophobe fraction content on the rheological properties of hydrosoluble associative polymers obtained by micellar polymerization
10. Interaction of carbon monoxide with PEDOT-PSS/zeolite composite: effect of Si/Al ratio of ZSM-5 zeolite
11. Synthesis and characterization of amphiphilic graft copolymers with hydrophobic poly(α-methylstyrene) backbone and hydrophilic poly(n-vinylpyrrolidone) side chains
12. Effect of clay modification on the dynamic mechanical and dielectric properties of PMMA nanocomposites via melt blending
13. Microwave-assisted Wurtz coupling of methylphenyldichlorosilane in solvent-free conditions
14. On the structure alteration of crosslinkable gelatin coupled with methacrylic acid and its hydrogel
15. Rheological properties of pectin, poly(vinyl alcohol) and their blends in aqueous solutions
16. Intercalation of montmorillonite based on dendritic quaternary ammonium: preparation and characterization
17. Percipitation copolymerization of acrylamide and acrylic acid: Determination of reactivity ratio by various methods
18. Effect of FeCl3 on the morphology, wetting behavior, and stabilization/carbonization of polyacrylonitrile nanofibers prepared by electrospinning
19. Synthesis of star hydrophobically-modified acrylamide copolymers and its some properties in brine
20. Synthesis of artificial opals with core-shell morphology via emulsion polymerization technique
21. Fabrication and characterization of poly(triazine dithiol) thin films using a two-step deposition/ photopolymerization process and micropattern
22. Comparative study on the effects of galbanic acid, galbanic ferric salt and tetrabromo galbanic acid on photo-oxidative degradation of linear low density (LLDPE) films
23. Precipitated calcium carbonate as carrier particles of ‘dry liquids’ for post-processing crosslinking reactions
24. Water-soluble copolymers of 2-methacryloyloxyethyl phosphate: Synthesis and properties
25. A review on modeling of the thermal conductivity of polymeric nanocomposites
26. Swelling studies and adsorption of safranin T by acrylamide/maleic acid/methylene-bis-acrylamide based hydrogels
27. Synthesis and thermal properties of new copolyesters based on polycaprolactone
28. Dissolution of natural polymers in ionic liquids: A review
29. Enhanced copper-catalyzed “click” reaction between homopolymers with terminal azide and alkyne groups in the presence of water
30. Optimization approach for processing design in the extrusion process of plastic profile with metal insert
31. The effect of P-chiral center on helical conformation of optically active N-propargylphosphonamidates
32. Preparation of poly(methyl methacrylate) nano-latexes via UV irradiation in the presence of iron aqueous solution
33. Properties and structural characterization of chitosan/poly(vinyl alcohol)/graphene oxide nano composites
34. Reentrant swelling behavior of poly(4-vinyl phenol) gel in aqueous organic solvent mixtures
35. Synthesis and characterization of high molecular weight and low dispersity polystyrene homopolymers by RAFT polymerization
36. Use of a novel pH-triggered polymer-gel system for optimal mobility-control applications
37. Synthesis, characterization of pyridine-based polyimides and their use as glucose oxidase immobilization media
38. A comparative study of the reactivity of three plant oil methyl esters with divinylbenzene by FTIR spectroscopy
39. Poly(imide-amides) oligomers based on germarylene units containing amino acid moieties: synthesis, characterization and thermal analysis
40. Synthesis of new photobactericidal polymers by “click chemistry” and a study of their biological activity
41. Contact angle hysteresis on plasma treated polyethylene terephthalate
42. A study on the kinetic behaviour and thermo-mechanical properties of nanoclay reinforced unsaturated polyester resin prepared under high shear conditions
43. Morphology, thermal properties and mechanical relaxations of metallocene syndiotactic polypropylenes
44. UV-Curable organic-inorganic hybrid films based on tetraethylorthosilicate oligomer and special acrylated polyester
45. Synthesis of polyethylene glycol diacrylate nanogel using irradiation of inverse micelles technique
46. Synthesis and characterization of polymethylsilsesqui oxane microspheres by the two-step sol-gel method
47. Observation of oxygen inhibited layer of organic dental resin by confocal Raman-microscopy
48. Monte Carlo simulation of chromatin fibre confined in a nanochannel
49. Preparation and properties of molecular-weight-controlled polyimide adhesive film
50. Tissue engineering scaffold electrospun from poly(ε- caprolactone)-b-poly(sulfobetaine methacrylate) block copolymers with improved hydrophilicity and good cytocompatibility
51. Synthesis of new copolymers 4,4’-sulfinylbisphenol derivative with N-vinyl-2-pyrrolidone - photopolymerization and thermo-mechanical studies
52. Retraction notice to “Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution”
53. Production of microcellular foam based on PP/EPDM: The effects of processing parameters and nanoclay using response surface methodology
54. ARGET ATRP of copolymerization of styrene and acrylonitrile with environmentally friendly catalyst and ligand
55. Physical and mechanical properties of rigid polyurethane foams modified with polystyrene beads
56. Effects of nanoparticles in cells infected by Toxoplasma gondii
57. Investigation of the surface properties of POSS-modified polyacrylate by inverse gas chromatography
58. Synthesis and characterization of a novel wound dressing by PVP/ PAANa/chitosan with semi-interpenetrating polymer network structure
59. Electroactive perovskite lead zirconate particles embedded in an acrylic elastomer
60. Preparation of new FI-type catalyst for polymerization of ethylene
61. Synthesis and solution properties of a meta-linked anionic poly(phenylene ethynylene) conjugated polyelectrolyte
62. Biomedical applications of electrically conductive polymeric systems
63. Optimization of 4-vinylpyridine nitroxide mediated controlled radical polymerization: Effect of initiator protection and complexation with C60
64. Polymers containing phtalimidoalkyl groups in the side chains. effect of the alkyl groups in monolayers at the airwater interface
65. Preparation and characterization of polyhedral oligomeric silsesquioxane/polystyrene nanocomposites
66. Polymerization of 1,3-butadiene using (salen)Ni(II) and (salphen)Ni(II) complexes in combination with methylaluminoxane
67. Synthesis and thermal properties of triblock copolymers of methyl methacrylate using combination of anionic and controlled radical polymerization: Poly(methyl methacrylate) center block bearing different microstructures
68. Characterization of molecular orientation under tensile deformation by near infrared spectroscopy
69. The variation of comonomers feeding profile to design the distribution of chains composition for the optimization of the mechanical properties in copolymer systems
70. Oligoetherols and polyurethane foams with carbazole ring
71. Functional flexible substrate in altering substitution phenylene core of fluorinated poly(arylene ether)s
72. Condensation between guanidine hydrochloride and diamine/multi-amine and its influence on the structures and antibacterial activity of oligoguanidines
73. Interfacial synthesis and characterization of L-lysinederived optically active poly(hydrazide-imide)s
74. Significantly enhanced dielectric response in composite of P(VDF-TrFE) and modified multi-walled carbon-nanotubes
75. Aqueous AGET ATRP of sodium 2-acrylamido-2-methyl-N-propane sulfonate yielding strong anionic comb polyelectrolytes
76. On the origin of the electrical response of vapor grown carbon nanofiber + epoxy composites
77. Study on the thermal degradation of chitosan-Cu/Ni/Mn complexes
78. Synthesis of long chain aliphatic ester and its titanium complexes for ethylene polymerization
79. Dynamic lattice liquid (DLL) model in computer simulation of the structure and dynamics of polymer condensed systems
80. The synthesis and characterization of the polyurethanes with antimicrobial properties
81. Preparation of a novel superhydrophobic PMMA surface with nanostructure and its blood compatibility
82. Effects of sterically hindered N-alkoxyamines on photooxidative stability of reinforced polypropylene
83. Surface characterization of polymer foils
84. Synthesis and characterization of salt resistance hydrogel microspheres by inverse suspension polymerization
85. A new high-soluble precursor for in situ silver nanoparticle generation in polymers
86. The properties, morphology and structure of BPDA/ PPD/ BOA polyimide fibers
87. Synthesis and characterization of an amphiphilic methoxy poly(l-lactide)-block-poly(glycidylmethacrylate) copolymer as a drug nanocarrier
88. Synthesis of aromatic polyimide bearing long alkyl chains through click reaction
89. Synthesis of cross-linked comb-type polysiloxane for polymer electrolyte membranes
90. Miscibility of chitosan and poly(ethyleneglycol) blends in buffer solution
91. Thermal behavior of epoxy blends for light emitting diode encapsulation