Polystyrene latex particles obtained by emulsifier-free emulsion polymerization and their interaction with bentonite

Articles in the same Issue

1. Sacrificial functional polystyrene core template to fabricate cross-linked chitosan microcapsules
2. Preparation and characterization of poly(acryl amide-coacrylic acid)/nay and Clinoptilolite nanocomposites with improved methylene blue dye removal behavior from aqueous solution
3. Biopolymeric matrices based on chitosan for medical applications
4. Novel D-glucose and D-mannose based oligomers: synthesis and characterization
5. The pervaporation performance and mass transfer process of PDMS membranes for acetic acid/water mixture
6. Silica supported Schiff-base cobalt^III complex-Lewis base system: a highly selective catalyst for alternating copolymerization of CO₂ and propylene oxide
7. Preparation of polyacrylonitrile via AGET ATRP initiated by CCl₄
8. Synthesis, characterization and properties of novel thermally stable copoly(amide-imide)s containing dimethylsilane moieties
9. Shear degradation resistance of star poly(ethyleneimine) - polyacrylamides during elongational flow
10. Functional nano fillers in epoxy-dicyandiamide adhesives for prolonged shelf life and efficient cure
11. Coalescence during annealing of quiescent immiscible polymer blends
12. Electrospinning technique in the nano-photocatalyst research
13. The morphology and non-isothermal crystallization kinetics of PET/BaSO₄ hybrid fibre
14. Thermal and mechanical properties of polymethyl mathacrylate reinforced by polyhedral oligomeric silsesquioxane
15. Structural design of PNIPA-based intelligent hydrogels via porous silica templates
16. Preparation of a new polypropylene/clay nanocomposites via in situ polymerization
17. PAN monofilament in nanoscale: a novel approach
18. Crystallization kinetics and miscibility of blends of polyhydroxybutyrate (PHB) with ethylene vinyl acetate copolymers (EVA)
19. Weld line behaviour of exfoliated and toughened polypropylene layered silica nanocomposites
20. Predicting the Young’s modulus of intercalated and exfoliated polymer/clay nanocomposites
21. Synthesis of polyetherols with 1,3-pyrimidine ring using 6-aminouracil, ethylene carbonate and propylene oxide
22. Synthesis and characterization of some polyimide-epoxy composites
23. Flow induced crystallization of LDPE nanocomposites: A rheological and morphological characterization
24. Terpolymers of N-vinylpyrrolidinone and 1-vinylimidazole as new supports for palladium nanocluster catalysts
25. The anomalous behavior of physical-chemical parameters during polymerization of organic-inorganic polymer systems based on reactive oligomers
26. Phase transition behavior of silicone based liquid crystalline polymers
27. Preparation and properties of fluorosilicone and fluorosilicone elastomer with various contents of trifluoropropyl groups
28. Growth of large-scaled polypyrrole fibers using polyacrylamide as modifier
29. Quaternary ammonium salt substituted polyhedral oligosilsesquioxanes (POSSes) as structure directing agents in the generation of porous silica materials
30. Evaluation of crosslinked chitosan hydrogels as carriers for prolonged delivery of some novel nitric oxide donor compounds based on theophylline and paracetamol
31. Suzuki polycondensation: a simple way for synthesis of new polyazines containing thiophene and fluorene moieties
32. Polymer composites as sensing materials for liquid organic solvents – preliminary results
33. Polystyrene latex particles obtained by emulsifier-free emulsion polymerization and their interaction with bentonite
34. Magnetorheological behaviour of magnetic carrageenan gels against shear and compression strains
35. Thermal characterization of novel aliphatic polyesters with ether and thioether linkages
36. Study on the coagulation process of cellulose nascent fibers with ionic liquid AMIMCl as a solvent during dry-wet spinning
37. Carbon black/polypyrrole/nitrile rubber conducting composites: synergistic properties and compounding conductivity effect
38. On the mechanism of conductivity enhancement in PEDOT/PSS film doped with sorbitol
39. Controlled RAFT synthesis of polystyrene-b-poly(acrylic acid)-b-polystyrene block copolymers and their self-assembly in an ionic liquid [BMIM][PF6]
40. SiO₂ Nanofiller impact on crystallization kinetics during adiabatic anionic polymerization of ε-caprolactam
41. Polymerization of ethylene using a nickel α-diimine complex covalently supported SiO₂-MgCl₂ bisupport
42. Improving hydrophilicity and protein resistance of silicone hydrogel by plasma induced graft polymerization of 2- methacryloyloxyethyl phosphorylcholine
43. Bioactive support for cell cultivation and potential grafting. Part 1: Surface modification of 2-hydroxyethyl methacrylate hydrogels for avidin immobilization
44. Synthesis and characterization of novel thermally stable poly(ether-amide)s containing dinaphthosulfone units in the main chain
45. Preparation and characterization of high molecular weight poly(trimethylene terephthalate) by solid-state polymerization
46. Oligomeric alkylpyridinium surfactants prepared via ATRP
47. Synthesis of thermotropic polyurethanes containing ester mesogen units and their mesophase behavior
48. Characterization of nylon 6/11/montmorillonite nanocomposites prepared by in situ copolymerization
49. A Raman study of nylon 6 annealed under high pressure
50. Influences of silane/ether composite external donors on propylene polymerization with MgCl₂-supported Ziegler-Natta catalyst in the presence of hydrogen
51. Furan-based polysemiacylcarbazides by polyaddition of bis(furanic hydrazide)s with diisocyanates
52. Thin-layer synthesized acrylamide copolymers modified with montmorillonite. Flocculation efficiency evaluation
53. Molecular dynamics study on the reason of fluorescence quenching of a pyrene-functionalized fluorescent film
54. Energy needs for drying of PAAm- κC composites prepared with various κC contents
55. Preparation of poly(vinylidene fluoride)-silver nanoparticle composite using dimethylformide as both a solvent and a reductant
56. Unconventional microstructure of maleic anhydride copolymers in condensed and dissolved states
57. Study on electrical property relaxations of 10 MeV electron beam irradiated HDPE
58. Sulfur-containing polyurethanes as novel macro photoinitiators comprising in-chain benzophenone and coinitiator amine for photopolymerization
59. Modification and shaping of carbon nanotubes with an electron beam
60. Thermal stability, crystallization and mechanical properties of nylon11/montmorillonite nanocomposites
61. Dielectric and thermal properties of thermoplastic elastomer gels in the presence of nanographite
62. Tribological behavior of an ultrahigh molecular weight polyethylene in lubricated environments
63. Copolymerization of acenaphthylene with methacrylic monomers
64. Hypercrosslinked polystyrene microspheres by suspension and dispersion polymerization
65. Carbohydrate-based polyurethanes: A comparative study of polymers made from isosorbide and 1,4-butanediol
66. Toughening of epoxy resin with poly(methyl methacrylate) grafted silica core-shell particles
67. Effect of aspect ratio, surface modification and compatibilizer on the mechanical and thermal properties of ldpe-mwcnt nanocomposites
68. A predictive model for the synthesis of polylactide from lactic acid by response surface methodology
69. Preparation and properties of waterborne siloxane-containing polyurethane for moisture permeable textile coating
70. Preparation of PAA/PEO blend nanofibers via electrospinning process
71. SPPO/PEI-based acid-base blend membranes for direct methanol fuel cells
72. Influence of nanoparticles on the morphology, thermal stability and air permeability of electrospun polylactic-acid fibres
73. Use of crystal violet to prepare SBR-montmorillonite clay nanocomposites
74. Computer simulation study on the structure and physical property of pyrene-functionalized fluorescent film
75. Fabrication and electrochemical characterization of carbon nanofibers by electrospinning with various MnO₂ contents
76. Effects of compatilizers on the cellular structures, interfacial morphologies and mechanical properties of PP foam composites
77. Synthesis and characterization of functional six-membered ring carbonates for the preparation of orthogonal couplers
78. correlations of mechanical properties and microstructural parameters in annealed drawn film of liquid crystalline polymer in situ reinforced PP
79. Crystallization behavior of poly(ε-caprolactone) grafted on silicon surface
80. Polymerization of acrylamide inverse microemulsion initiated directly by UV radiation
81. Ring-opening polymerization of ethylene carbonate using ionic liquids as catalysts
82. Preparation of the high dielectric performance flexible materials achieved by polyacrylamide/poly(vinylidene fluoride) blends
83. The role of clay-montmorillonite on thermal characteristics and morphology of electrospun PAN nanofibrous mats
84. The synergism of MgCO₃ and 2ZnCO₃·3ZnO·4H₂O as flame retardants and smoke suppressants for flexible poly(vinyl chloride) (PVC)
85. Synthesis and magnetic properties of poly(amic acid) complexes containing 1,10-phenanthroline
86. Obtaining of polyurethane foams with contribution of hydroxyalkylation products of oxalamide with alkylene carbonates and their properties
87. Preparation of silk fibroin microspheres by emulsificationdiffusion method for controlled release drug delivery applications
88. Preparation of polyethylene-g-(polyacrylic acid) and its sodium salt ionomer by in-situ chlorinating graft copolymerization
89. The miscibility estimation of some nanocomposites based on starch
90. Effect of layered silicates on rheological and mechanical properties and thermal stability of high-molar mass polydimethylsiloxane matrix
91. Fractional isolation and structural characterization of hemicellulosic polymers from Caragana sinica