Preparation of ZnO/PMMA inorganic/organic composite microspheres via soap less emulsion polymerization

Articles in the same Issue

1. Non-isothermal degradation kinetics for polycarbonate/ polymethylphenylsilsesquioxane composites
2. Konjac glucomannan nanocrystals prepared by acid hydrolysis
3. Investigation of gel-spun PAN fiber morphology by membrane technology techniques
4. Modification of poly(D,L-lactic acid)-co-poly(ethylene glycol) copolymer by low energy electron beam (EB) radiation
5. Effect of cure cycle on temperature/degree of cure field and hardness for epoxy resin
6. Hydrodegradation of starch incorporated polylactic acid with acrylic acid as interfacial linker
7. Fabrication and characterization of collagen (shell) /thermoplastic polyurethane (core) composite nanofibers by coaxial electrospinning
8. Miscibility and crystallization kinetics of poly(ε- caprolactone)/bezoxazine blends
9. Urbach tail analysis on the defect states of polypyrrole thin films prepared by AC plasma polymerization Urbach tail analysis on the defect states of polypyrrole thin films prepared by AC plasma polymerization
10. Synthesis and characterization of novel optically active, poly(ester-imide)s bearing calix[4]arene and amino acid moieties: ionophoric properties and extraction abilities towards alkali-metal cations
11. Synthesis and property studies of oligomer obtained from the reaction of 4-vinylbenzocyclobutene and styrene with divinyl tetramethyl disiloxane-bisbenzocyclobutene
12. Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications
13. The effect of vinyl benzyl chloride on emulsion polymerization of styrene
14. Modification of PVDF properties by dielectric barrier discharge treatment
15. Preparation of submicron ion-exchange fibers and application in copper ions removal from aqueous solutions
16. Dependence of comonomer effect and hydrogen effect on internal donor in ethylene/1-hexene copolymerizations with MgCl2-supported catalysts
17. L-Lactide polymerization by calix[4]arene-titanium (IV) complex using conventional heating and microwave irradiation
18. Epoxy-based nanocomposites with amine modified single walled carbon nanotubes
19. Characterization of orientation in polyethylene by scratch testing
20. Thermal degradation behaviours of flame-retardant polycarbonate containing potassium diphenyl sulfonate and polymethylphenylsilsesquioxane
21. Nucleation loci in the ring-opening polymerization of octamethyl- cyclo-tetrasiloxane in Winsor I system with dodecylbenzene sulfonic acid sodium salt and sulfuric acid
22. MgH2/PEG initiating system for ring opening polymerization of lactone and lactide
23. Preparation and properties of polyurethane foams from hydroxypropoxy derivatives of urea and isocyanates
24. Polypyrrole-modified starch films: structural, thermal, morphological and electrical characterization
25. Block copolymerization of 2,2-dimethyltrimethylene carbonate with adipic anhydride catalyzed by lanthanum tris(2,6-di-tert-butyl-4-methylphenolate)
26. Study of the rheological properties of polypropylene/talc/nanoclay ternary hybrid nano composites
27. Synthesis of ATRP macroinitiator based on synthetic cis- 1,4-polyisoprene and its application for graft polymerization of MMA
28. Effect of P(St-EGDMA)/P(MMA- St-BA-MA) core shell particles on dyeable fine polypropylene fibres
29. Effect of PVP content on the quaternized polysulfone in blend membranes
30. Charge storage and mechanical properties of porous PTFE and composite PTFE/COC electrets
31. Interfacial properties of all-polypropylene composites
32. Synthesis and properties of hyperbranched polyurethane elastomers based on dimer fatty acid-ethylene glycol polyester diol
33. Optimization of chitosan-polyvinylalcohol electrospinning process by response surface methodology (RSM)
34. Preparation and Investigation of chitosan nanoparticles including salicylic acid as a model for an oral drug delivery system
35. Study of polyamide-6 hollow fiber membranes prepared via a thermally induced phase-separation method
36. Preparation and characterization of poly(propylene carbonate)/polystyrene composite films by melt-extrusion method
37. An algorithm for Monte Carlo modeling of hyperbranched polymerization
38. Cosmeto-textile from formulation to characterization: an overview
39. Fire retardancy effect of aluminium phosphinate and melamine polyphosphate in glass fibre reinforced polyamide 6
40. Post-irradiation effects on Nylon-fibers reinforced concretes
41. macroporous hydrogels based on 2-hydroxyethyl methacrylate. Part 7: Methods of preparation and comparison of resulting physical properties
42. Thermoresponsive aggregation behavior of NiPAAm/glyco monomer block copolymers studied by dynamic light scattering
43. Research of mechanical strength enhanced fibrin-PLGA hybrid scaffold with its effect on proliferation of rMSC
44. Preparation of ZnO/PMMA inorganic/organic composite microspheres via soap less emulsion polymerization
45. Improvement of thermal properties of polyhydroxybutyrate by grafted chemicals
46. Probing superficial and mechanical behaviors of nanosilica incorporated poly(acrylate) hybrid latexes
47. Methacrylate copolymers with substituted azobenzene side groups: synthesis, characterization and photo-induced birefringence properties
48. Tensile behaviour of rubber-modified polyester resin materials
49. Microwave-assisted ring-opening polymerization of poly (glycolic acid-co-lactic acid) copolymers
50. Correlation between solution and gel properties of copolymers of acrylamide and diallyldimethylammonium chloride
51. Role of interfacial interaction on the crystallization behavior and melting characteristics of PP/Nano-CaCO3 composites modified with different compatibilizers
52. Synthesis of conductive nanocomposites based on polyaniline/poly(styrene-alt-maleic anhydride)/polystyrene
53. External potential dynamics simulation of the compatibility of T-shaped graft copolymer compatibilizing two immiscible homopolymers
54. Tuning of multicompartment micelles from cross-linkable ABC triblock copolymer with the addition of core-forming homopolymer
55. Synthesis and kinetic studies of TiO2/polystyrene composite particles by emulsion polymerization
56. Development of synthetic extracellular bone matrix on poly(L-lactic acid) substrates via electrostatic selfassembly and biomimetic mineralization technologies
57. Synthesis of UV-curable resin/ZnO composite films as pH buffering material
58. Synthesis, third-order nonlinear optical (NLO) properties of polystyrene containing 1,8-naphthalimide chromophores in the side chain
59. Effect of marble particle size and gamma irradiation on mechanical properties of polymer concrete
60. Flexible plasticized PLA with high crystallinity obtained by controlling the annealing temperature
61. Combustion and thermal behaviors of the novel UV-cured intumescent flame retardant coatings containing phosphorus and nitrogen
62. Synthesis and characterization of cis-5-norbornene-2,3- dicarboxylic anhydride-chitosan
63. Synthesis and quaternization of nitroxide-terminated poly(4-vinylpyridine-co-acrylonitrile) macroinitiators and related diblock copolymers
64. Kinetics and thermodynamics of indanthrene textile dye adsorption onto chitosan
65. Synthesis and characterization of α-butyl-ω-{3-[(2,2- dihydroxymethyl)-propionyloxy]}propyl polydimethyl siloxane
66. Diffusion coefficients in systems LDPE+cyclohexane and LDPE+benzene
67. Characterization of chitin and chitosan extracted from shrimp shells by two methods
68. Poly(ethylene terephthalate)-carbon nanofiber nano composite for fiber spinning; properties and combustion behavior
69. Novel low-band-gap conjugated polymers using an alternating donor/acceptor repeat unit
70. Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride
71. Stereocomplexes formation from enantiomeric star-shaped block copolymers of ε-caprolactone and lactide
72. The preparation of phosphorylcholine-containing poly(Llactide) nanoparticles with solvent evaporation method
73. Essential work of fracture study on thermoplastic polyolefin filled with silicon carbide nanoparticles
74. Property of poly(hydroxybutyrate) complexed polymer with soy protein isolate using glycerol as a medium
75. Preparation and characterization of 1,2,4,5-benzenetetra carboxylic-chitosan
76. Study on the aqueous two-phase copolymerization of cationic polyacrylamide
77. Effects of comonomer content, comonomer distribution and crystallization condition on crystallinity and dimension of crystal lattice of ethylene-propylene copolymers
78. ATRP of MMA initiated by 2-bromoisobutyric acid 4-(2- benzothiazole-2-yl-vinyl)-phenyl ester (BPBVE) and its fluorescent property in the presence of metal ions
79. Preparation and characterization of hydroxybutyl chitosan
80. A convenient method to acquire third-order NLO materials by ATRP
81. Comparison of cation effects on phase transitions of kappa and iota carrageenan
82. Synthesis of long chain semiaromatic polyamides based on decanediamine
83. Synthesis and water/oil repellency properties of cationic perfluoralkyl acrylate copolymer latices
84. Thermal characterization of novel aliphatic polyesters with ether and thioether linkages
85. Poly(α-hydroxyacids) in biomedical applications: synthesis and properties of lactic acid polymers
86. Catalytic activity of V2O5 on aniline polymerization and the study of structural properties of poly(aniline)/V2O5 nano composite
87. Determination of thermorheological phase diagram of poly(propylene)/poly(ethylene-b-ethylene oxide) blends
88. Photosensitive poly(ether sulfone)s for thiol/ene UV curable coatings: synthesis, characterization and crosslinking
89. Synthesis and physicochemical characterization of branched poly(monomethyl itaconate)
90. Functionalization of polypropylene and compatibilization of polypropylene/nylon 6 blends with copolymers containing α-methyl styrene units
91. Synthesis and micellization of polydimethylsiloxane– carboxy-terminated poly(ethylene oxide) graft copolymer in aqueous and organic media and its application for the synthesis of core-shell magnetite particles
92. Investigation and modeling of the thermal conductivity of PP/clay nanocomposites and PP/MWCNT nanocomposites
93. Effects of kaolin and maleic anhydride contents on melt elasticity and flexural behaviour of polypropylene/kaolin and unplasticised poly(vinyl chloride)/kaolin composites
94. Competing effect of shear and β-nucleating agent on the crystallization of injection-molded iPP
95. Microstructures of fiber suspensions in complex geometry
96. Effects of carbon nanofibers on the crystallization behavior of polyethylene oxide
97. Preparation of vinyl polymer/polyurethane hybrid latex particles and their application in nano-sized vinyl polymer particle/thermoplastic polyurethane blends
98. Surface and electrical properties of high density polyethylene + carbon black composites near the percolation threshold
99. Preparation of core-shell polymeric nanocapsules containing liquid cores via redox interfacial-initiated microemulsion polymerization
100. Influence of silica content in sulfonated polysulfone/ phosphotungstic acid hybrid membranes on properties for fuel cell application
101. Comparison of Matrix Assisted Laser Desorption/ Ionization Mass Spectrometry with Electrospray Ionisation Mass Spectrometry for the characterisation of semitelechelic polyethylene oxide
102. Non-isothermal crystallization kinetics of isotactic polypropylene nucleated with nucleating agent bicyclic [2,2,1] heptane di-carboxylate
103. Effect of PTW on crystallization kinetics of toughened PBT/PC blends
104. Challenges in preparation of metal-containing nanocomposites; dispersion of titanium into plastics
105. Study on micro-phase separation structure of poly(ethylene terephthalate)-poly(hexylene terephthalate) (PET-PCT) copolymer
106. Preparation and swelling behavior of pH-sensitive and saltresistant amphoteric semi-IPNs hydrogels based on starch phosphate and poly[2-[(methacryloyloxy) ethyl] trimethylammonium] chloride
107. Mechanical and hygrothermal aging study on quaternary polyamide 6/maleated styrene-ethylene-butylenestyrene/ clay/short glass fiber hybrid composites
108. Physicochemical properties and molecular weight characterisation of porcine dermal collagen digested under varying conditions with clostridium histolytic collagenase
109. Nucleating effect of surface modified MWNTs on crystallization of MWNTs/PA6 composites
110. Graft polymers prepared by catalytic chain transfer polymerization (CCTP) and applied as solvent-borne dispersants for carbon black dispersions of high solid
111. Fabrication of poly(lactic acid) scaffolds by a modified solvent casting/porogen leaching method
112. Synthesis, characterization and antifungal properties of N,O-(acyl)-N-(trimethyl) chitosan chloride
113. Thermal stability and mechanical properties of modified starch/NR composite
114. In situ formation of silver nanoparticles based on dendriticlinear amphiphilic block copolymer micellar templates
115. Study on the effect of processing conditions on the mechanical properties of PP/PC/SEBS ternary blends using Taguchi experimental analysis
116. Critical conversion in the processes of polymer formation
117. Novel silane based cross-linkers for preparation of methyl methacrylate gels
118. Characterization of hydroxylated hyperbranched polyesters of fourth and fifth generation
119. Thermomechanical behavior and nonisothermal crystallization kinetics of poly(ε-caprolactone) and poly(ε- caprolactone)/poly(N-vinylpyrrolidone) blends
120. Preparation and characterization of flame retardant epoxy resins based on phosphorus-containing biphenyl-type phenolic resin
121. Hybrid polymer/nanocrystalline TiO2 composites prepared via low-temperature in-matrix crystallization of titania
122. On the metastability of β phase in isotactic polypropylene: experiments and numerical simulation
123. Synthesis and characterization of temperature/pH-sensitive hydroxypropylcellulose/ sodium alginate hydrogel
124. Liquid crystalline polyureas with oligo(ethylene glycol) sequences
125. Aqueous chemical grafting of modified-PEG onto maghemite nanoparticles: Influence of grafting conditions
126. Rheological characterization of polystyrene melts dissolved with supercritical nitrogen fluid during microcellular injection moulding
127. Second harmonic generation and photochromic grating in guest-host polymer system containing azo amide chromophores
128. Preparation of the crosslinked polymer electrolyte membranes based on a hyperbranched poly(amidoamine) and their proton conductivity
129. Synthesis and characterization of novel value added biodegradable poly(aleuritic acid) from renewable resources (shellac) and invertible amphiphilic behaviors in various solvents
130. Isothermal crystallization of high density polyethylene with monomodal and bimodal molar mass distribution
131. Variable surface properties of PTFE foils
132. Enhanced impact strength and deviated thermal decomposition of PP and PS toughened with graft-modified rubbers
133. Characterization of copolymerization of acrylonitrile with the functionalized comonomers in dimethyl sulfoxide solvent and copolymers suitable for carbon fibers
134. Curing kinetics study of epoxy resin/hyperbranched poly(amideamine)s system by non-isothermal and isothermal DSC
135. Synthesis and properties of poly(arylene imino) containing fluorenone group (PIKF)
136. A study on hybrid oligomeric type II photoinitiator
137. Copolymerzation of L,L-lactide with ε-caprolactone by using novel zinc L-proline organometallic catalyst
138. The properties of sericin/poly(vinyl alcohol) films modified by boric acid
139. Synthesis and characterization of novel benzoxazines containing nitrile and allyl groups and their polymers
140. Synthesis and thermal stability of star polymer with eight arms using polyhedral oligomeric silsesquioxane as a core
141. Study on LLDPE molecular structure characterization by preparative and analytical cross-fractionation
142. Synthesis and characterization of organogel from poly(acrylic acid) with cellulose acetate
143. Nitroxide-mediated polymerization of styrene in the presence of a novel trinitroxide
144. Preparation and characterization of hydroxybutyl chitosan
145. Heterogeneization of alpha diimines nickel catalysts for the polymerization of ethylene and methylmethacrylate
146. Preparation and mechanical properties of PCL-based polyurethanes as potential biomaterials for short-term applications