Synthesis, characterization and evaluation of poly [glucose acrylate-methacrylic acid] hydrogels for colon-specific drug delivery

Articles in the same Issue

1. Swelling of iota-carrageenan gels prepared with various CaCl₂ content: A fluorescence study
2. A Study of Crystallinity of Graft Copolymers of Flax Fiber with Binary Vinyl Monomers
3. Preparation, Characterization and Antifoaming Property of Fluorosilicone Oils with Fluoroalkyloxypropyl Group Substitution
4. Investigation of Ethylene Polymerization Kinetics over Ziegler-Natta Catalysts: Employing Moment Equation Modeling to Study the Effect of Different Active Centers on Homopolymerization Kinetics
5. Novel poly(aryl ether ketone)s with anthracene in the backbone
6. Effect of Melting Conditions on Crystallization Behavior of Poly(trimethylene terephthalate)
7. Sulphonation of Expanded Polystyrene Waste Under Microwave Irradiation
8. Synthesis and Characterization of Highly Soluble and Heat Stable New Poly(amide-ether)s Containing Pyridine Rings in the Main Chain
9. Copolymerization of Ethylene and 1-Hexene Catalyzed by the Zirconocene/Al(i-Bu)₃/B(C₆F₅)₃ Catalytic System
10. Anti-reflection and anti-static (AR/AS) coatings made by TiO₂ sol-gel process with poly(3,4-ethylenedioxy thiophene)
11. Preparation and Characterization of Novel Sulfonated Copolyimide Membranes
12. Surface Characterization of Absorbing Polymer Films Deposited on Transparent Glasses
13. Second Order Nonlinear Optical Properties of Multifunctional Chiral Azobenzene Polymers
14. Viscosimetric studies of chitosan nitrate and chitosan chlorhydrate in acid free NaCl aqueous solution
15. Mechanical behavior of high impact polystyrene based on SB copolymers as a function of synthesis conditions: Part II
16. Use of 4-vinylpyridine and 2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fibers for removal of congo red from aqueous solution
17. Controlled release of indomethacin from crosslinked alginate beads
18. Use of the SPME-GC-MS technique to study the thermal degradation of isotactic polypropylene: Effects of temperature and reaction time, and analysis of the reaction mechanism
19. Effect of the initial water activity on the yields and molecular wWeights of the lipase-catalysed synthesis of aliphatic polyesters in low pressure liquid R-134a
20. MWNT Surface Self-Assembling in Fire Retardant Polyethylene-Carbon nanotubes nanocomposites
21. A high mechanical strength hydrogel from polyacrylamide/polyacrylamide with interpenetrating network structure by two-steps synthesis method
22. Sisal, Sugarcane Bagasse and Microcrystalline Celluloses: Influence of the Composition of the Solvent System N,NDimethylacetamide /Lithium Chloride on the Solubility and Acetylation of these Polysaccharides
23. Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites
24. Synthesis and characterization of triphenylamine and Bbis(indolyl)methane center-functionalized polymer via reversible addition-fragmentation chain transfer polymerization
25. AGET ATRP of Acrylamide in Aqueous Media
26. Effect of Curing System on Mechanical Properties of NBR/Nylon-PET Cord Composite
27. Chain Extender and Diisocyanate Amount Effects on the Thermal, Mechanical and Wettability Properties of Some Polyurethane Elastomers
28. Synthesis and RGD peptide modification of poly{(lactic acid)-co-[(glycolic acid )-alt-(L-lysine)]}
29. Synthesis and swelling behaviour of fast-swelling superabsorbent composites
30. Stability of inverse microemulsions of acrylamide-based anionic flocculants: evidence about the need of unsaturated surfactants
31. First approach on transfection ability of novel amphiphilic water soluble degradable poly(ε-caprolactone)-g-poly(Llysine) copolymers
32. Electrical conductivity of poly(N-vinylcarbazole)-based polysodium-2,9,16,23-tetramethylamine tetracyclohexane tetrazaporphyrin composites
33. Polypropylene + Polystyrene Blends with a Compatibilizer. Part I. Morphology and Thermophysical Properties
34. Polypropylene + Polystyrene Blends with a Compatibilizer. Part 2. Tribological and Mechanical Properties
35. Sulfur containing optical plastics and its ophthalmic lenses applications
36. Modeling the physical properties of a homologous series on the melting temperatures and densities of n-alkanes and their simple alkyl-derivatives
37. Migration of model contaminants (ethylene glycol, DEHA and DEHP) from PET bottles into Iranian yogurt drink
38. Polyamide-6/montmorillonite nanocomposites toughened with ABS-g-MA core-shell structural particles
39. Rheological behaviour of low/high density polyethylene melt flowing through micro-channels
40. Using dioxane and water as mixed solvents to prepare pH and temperature dual responsive poly(N-isopropyl acrylamide-co-itaconic acid) hydrogels
41. The effect of temperature on tacticity for bulk thermal polymerization of styrene
42. Proton irradiation of ultra high molecular weight polyethylene for space applications
43. Cellular polyethylene-naphthalate films for ferroelectret applications: foaming, inflation and stretching, assessment of electromechanically relevant structural features
44. Impedance analysis and electromagnetic interference shielding effectiveness of vapor grown carbon nanofiber reinforced chlorobutyl rubber composites
45. Novel polymeric surfactants and their applications in miniemulsions
46. Synthesis and properties of some polyaminobis maleimides thermal and mechanical characterization
47. Characterization of acrylic copolymer latex modified by fluorine, silicon, and epoxy resin
48. Studies on thermal stability and UV-resistant performance of poly(MMA-co-M12-co-BPMA)/TiO2 composite particles
49. Synthesis and properties of new sulfonated naphthalenic polyimides as proton exchange membrane for fuel cell applications
50. Optically active poly(ester-imide): synthesis and characterization of new optically active poly(ester-imide) thermoplastic elastomers
51. A review on aromatic poly(ester-carbonate)s and transesterification resistant polyesters
52. Aromatic-aliphatic copolyesters based on waste poly(ethylene terephthalate) and their biodegradability
53. Effects of triethoxy and triphenylvinylsilanes on the porous structure of cross-linked poly(methyl methacrylate) beads
54. Synthesis and Characterization of Poly(methyl acrylate) + SiO₂ Hybrids
55. Synthesis and characterization of new liquid, branched and random poly(methylhydrosiloxanes)
56. Effect of LiCl and non-ionic surfactant on morphology of polystyrene electrospun nanofibers
57. Polysiloxane nanoparticles prepared by emulsion polymerization under microwave irradiation
58. The use of crude tall oil as feed-stock for alkyd resins
59. High density polyethylene/boron carbide composites for neutron shielding
60. First application of electrosynthesized polyterthiophene to organic solar cells
61. Evaluation of mechanical, morphological and thermal properties of waste rubber tire powder/LLDPE blends
62. New polyurethane materials from renewable resources: synthesis and characterization
63. Effects of solvents on post-irradiation grafting of styrene onto fluoropolymer films
64. All furanic polyhydrazides and corresponding polyoxadiazoles
65. Review on the thermo-oxidative degradation of polymers during processing and in service
66. Preparation and characterization of a novel spongy hydrogel from aqueous Bombyx mori sericin
67. Synthesis and characterization of new disilane -containing arylacetylene resin
68. Structural and dielectric properties of some epiclon-based polyimide films
69. Synthesis and structural studies of poly(tetramethyleneoxypropylene p, p´-bibenzoate)
70. Structures and potential applications of multihydroxyl branched polyethers obtained by cationic ring-opening polymerization involving activated monomer mechanism
71. Synthesis, characterization, thermal stability, conductivity and band gaps of monomer and oligo-4-[(thien-2-ylmethylene) amino] phenol
72. Correlation between morphology and NGM of 3,4- ethylenedioxythiophene (EDOT) in acetonitrile
73. Synthesis of soluble sulfonated polybenzimidazoles derived from 2-sulfonate terephthalic acid
74. Modification of poly(butylene terephthalate) by reaction with 1,4-butane sultone; synthesis and thermal characterization of new telechelic PBT ionomers
75. The state of clay dispersion in maleated polypropylene /organoclay nanocomposites via dielectric spectroscopy measurements
76. Crystalline form transformation of isotactic polypropylene induced by N,N’-diphenyl glutaramide
77. Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution
78. Anomalous phase behavior in blends of -SO3H terminated polystyrene with poly(n-butyl acrylate) containing a small amount of tertiary amino groups
79. Poly(4-methyl-1-pentene)/MWNT nanocomposites
80. The synergistic effect of dope concentration and jetdrawing on structure development of wet-spun poly(acrylonitrile)
81. Synthesis, characterization and thermal crosslinking behavior of new poly(aryl ether sulfone)s based on naphthalene isomers
82. In-situ polymerization of EDOT in water/methanol with different DBSA contents
83. Polymerization of n-butyl methylacrylate using bis(β- ketoamino)nickel(II)/MAO catalytic systems
84. Thermal stability, mechanical and adsorption resistant properties of HDPE/PEG/Clay nanocomposites on exposure to electron beam
85. A novel analytical approach to estimate isothermal and dynamic crystallization Avrami kinetic parameters
86. Highly soluble and colorless fluorinated poly(ether imide)s based on 4,4’-(2,5-tolylenedioxy)diphthalic anhydride and trifluoro methyl-substituted aromatic bis(ether amine)s
87. Interpretation of experimental IR spectra of (z)-4-(2- (acryloyloxy)ethoxy)-4-oxobut-2-enoic acid and its polymers
88. Preparation of azobenzene-terminated polymers via reversible addition-fragmentation chain transfer (RAFT) polymerization
89. Study of PET depolymerization during recycling
90. Synthesis of poly(methyl methacrylate)-b-poly(acrylic acid) by DPE method
91. Synthesis of nicotinamide-imprinted polymers and their binding performances in organic and aqueous media
92. Mechanical properties and hydrolytic degradation of methoxy poly(ethylene glycol)-b-poly(DL-lactide-coglycolide- co-ε-caprolactone) diblock copolymer films
93. Chitosan based antimicrobial films for food packaging applications
94. Synthesis of poly(styrene-block-ethylene oxide) copolymers by anionic polymerization and acid cleavage into its constituent homopolymers for the formation of ordered nanoporous thin films
95. Fabrication of cucurbit[6]uril mediated alginate physical hydrogel beads and their application as a drug carriers
96. Carboxyl functionalized poly(methyl methacrylate-acrylic acid-ethylene glycol dimethacrylate) copolymer particles and their amination with amine-nucleophiles
97. Preparation of super HIPS via nanocomposite assemblies in the presence of toughener- intercalant
98. The structure and property of the electrospinning silk fibroin/gelatin blend nanofibers
99. Investigation of thermal, rheological and mechanical properties of interfacially modified PP/mica composites
100. Bovine serum albumin imprinted calcium phosphate /polyacrylate/alginate multi-hybrid polymer microspheres in inverse-phase suspension
101. Modelling leading to water entrapment point in thermally driven hydrogelation of methyl cellulose
102. Encapsulation of ferromagnetic iron oxide particles by polyester resin
103. Polypropylene based carbon nanotubes composites: structure and properties
104. Novel blocked mercaptosilane (3-propionylthio-1- propyltrimethoxylsilane) for natural rubber/silica composite reinforcement in various curing systems
105. Synthesis and characterization of some composites with bioactive properties on the basis of vinyl ester resins
106. Preparation of polyaniline nanofibers using the organic solution of aniline as seed
107. Synthesis and characterization of poly(ethylene-vinyl alcohol)-g-poly(butyl acrylate) copolymers
108. Rapid phthaloylation and succinylation of hemicelluloses by microwave irradiation
109. Fine structure and physical properties of poly(butylene terephthalate) sheets prepared by roll drawing
110. Electromechanical properties of poly(dimethylsiloxane) and poly(3,4-ethylenedioxy thiophene)/poly(styrene sulfonic acid) blends
111. Electrospinning of poly-L-lactide nanofibers on liquid reservoir collectors
112. ESR and photopolymerization study of polymerizable benzophenone photoinitiators containing functional maleimide groups
113. Influence of annealing on microstructure & molecular orientation, thermal behaviour, mechanical properties and their correlations of uniaxially drawn iPP thin film
114. Cerium oxide hollow nanospheres prepared by polymermonomer self-assembly
115. Monte Carlo simulation on sequence statistical structures of gradient copolymers
116. Polymer-silica hybrids latexes dyed with Rhodamine B
117. Rheological studies of uncured epoxy–organoclay nanocomposite coatings
118. Study of tacticity and thermal rearrangement of low molecular weight 1,2- polybutadiene by NMR
119. Fabrication and electrical conducting behavior of carbon nanofiber reinforced high-density polyethylene/ polystyrene nanocomposites with low percolation threshold
120. Mechanical properties and morphology of low density polyethylene/polydimethylsiloxane immiscible blends: modeling and influence of curing agent
121. Preparation and characterization of thermo-sensitive micelles composed of PSt-b-P(DEA-co-DMA)
122. Novel cross-linkable polyphosphazene with o-acetyl phenoxide as the pendant group
123. Studies on the structure, morphology and thermal properties of HDPE/ petroleum resin blends
124. Synthesis and characterization of novel β-cyclodextrin cored poly(α-caprolactone)s by anionic ring opening polymerization
125. Assessment of protective effect of polycation on plasmid DNA attached on the metal surface by SPR
126. Effect of glycidyl methacrylate (GMA) on the stability of acrylic latex
127. Encapsulation of silica nanoparticles by poly(methyl methacrylate-co-styrene) via emulsion polymerization using dimethylaminoethyl methacrylate
128. Antimicrobial activity of nanocomposites: poly(amide) 6 and low density poly(ethylene) filled with zinc oxide
129. Studies on the synthesis, characterization and application of a novel copolymer macromonomer for polymeric solidsolid phase change materials
130. Morphology and properties of halloysite nanotubes reinforced polypropylene nanocomposites
131. Synthesis of antimicrobial polymer composition and in vitro drugs release study
132. Monomer recovery from polycarbonate by methanolysis
133. Thermomechanical behavior of nanoclay filled TPU/PP blends
134. The curing behavior of the epoxy/dicyandiamide (DICY)/2- methylimidazole system with intercalated clays
135. Study on superabsorbent composites XVII. Preparation and characterization of poly(acrylic acid)/attapulgite/Namontmorillonite superabsorbent composites
136. Synthesis and properties of a spinnable phase change material CDA-IPDI-MPEG
137. Chemical modification of poly(vinylacetylene) via click reaction
138. Synthesis and characterization of star and brush grafted polysiloxanes, obtained by atom transfer radical polymerization
139. Improving the biocompatibility of poly(ε-caprolactone) by surface Immobilization of chitosan and heparin
140. Using eggshell as a filler in elastomeric compounds: effect of incubation period on its performance toward elastomers
141. Synthesis of acrylated styrene-isoprene-styrene copolymer
142. Synthesis of carboxymethyl-chitosan/acrylic acid hydrogel using silane crosslinker
143. Effect of internal electron donor on copolymerization of ethylene and 1-hexene catalyzed by supported Ziegler- Natta catalysts
144. Preparation of poly(ε-caprolactone) and its nanocomposites in ε-caprolactam
145. Uv-Vis investigations on ion beam irradiated polycarbonate
146. Comparison of conventional and controlled bulk polymerization of styrene by N-methyl-2-pyrrolidone and 1-dodecanethiol
147. Gels from acrylic acid and hydroxypropyl cellulose via free radical polymerization
148. Characterization and optical properties of a novel conjugated polynitrile produced by plasma polymerization
149. Poly(aniline)/poly(methylmethacrylate) films obtained from waterborne latex nanoparticles
150. Alkoxymethylcyclosiloxanes - new efficient precursors of crystalline (CH₃SiO_3/2)₈ silsesquioxane and polymethyl silsesquioxanes
151. Controlling the phase morphology of immiscible poly(2,6- dimethyl-1,4-phenylene ether)/poly(styrene-co-acrylonitrile) blends via addition of polystyrene
152. Effect of temperature on structure, morphology and crystallinity of PVDF nanofibers via electrospinning
153. Mechanical and thermal properties of PP/compatibilized PP/acid treated SWNTs nanocomposites: Effect of different acid treatment times
154. PAAm and PEDOT/PSS hydrogel as potential electroactive devices: evaluation of surface and hydrophilic properties
155. Novel conductive polymer composites based on poly(butylene terephtalate) filled with carbon fibers
156. Study on the effect of galbanic acid on photo-oxidative degradation of linear low density polyethylene (LLDPE) films
157. Ruthenium(II) Ions triggered direct supramolecular polymerization of bis-terpyridine poly(ethylene glycol): New Insights on synthesis and optimization
158. In air synthesis of GA-cl-poly(MAA) hydrogel and study of its salt- resistant swelling behavior in different salts
159. Synthesis, characterization and evaluation of poly [glucose acrylate-methacrylic acid] hydrogels for colon-specific drug delivery
160. Preparation and characterization of thermoplastic elastomers (TPEs) based on waste polypropylene and waste ground rubber tire powder
161. First example of polystyrene end-functionalized with excited state intramolecular proton transfer (ESIPT) fluorophore by ATRP method
162. Surface modification of carbon nanofibers (CNFs) by plasma polymerization of methylmethacrylate and its effect on the properties of PMMA/CNF nanocomposites
163. Synthesis and swelling characteristics of zwitterionic hydrogel
164. Microstructure and properties of PET/EPDM, EPDM-g- MA/organoclay ternary hybrid nanocomposites: effect of blending sequence
165. Synthesis of new polyimides with 1,2,3-triazole units
166. Polyhydroxyalkylation of urea with ethylene carbonate and application of obtained products as components of polyurethane foams
167. Stabilization effect of polypyrrole in ϒ-irradiated low density polyethylene
168. Preparation and characterization of poly(hydroxyurethane) /halloysite nanocomposites via in-situ polymerization
169. Effect of diisocyanates on the structure and properties of UV-curable polyurethane dispersions with nano-scale particles
170. Residual stresses determination in injection molded virgin and recycled HDPE blends: mechanical properties and morphology
171. Unique structure and property of cyclodextrin and its utility in polymer synthesis
172. Application of ionic liquid [bmim]PF6 as green plasticizer for poly(L-lactide)