Synthesis and characterization of novel organosoluble aromatic copolyimides

Articles in the same Issue

1. Wear of thermoplastics determined by multiple scratching
2. Poling of β-poly(vinylidene fluoride): dielectric and IR spectroscopy studies
3. Scratch velocity and wear resistance
4. Microwave dielectric properties of glass-reinforced polymers
5. Rheological characterization of polymer-based nanocomposites with different nanoscale dispersions
6. Influence of adding poly(vinyl alcohol) fibres to poly(methyl methacrylate) matrix on the fracture behaviour of fibrereinforced composites
7. Calorimetric investigation of the phase behaviour of the binary system 7-mPEG 5000-succinyloxymethyloxycarbonyl- Paclitaxel (PP7)/water
8. Degradation of polymeric systems aimed at temporary therapeutic applications: Structure-related complications
9. Curing behaviour of epoxy resins with a diamine bearing an azobenzene group
10. Characterisation of ‘wet’ polymer surfaces for tissue engineering applications: Are flat surfaces a suitable model for complex structures?
11. Porous polymeric scaffolds for bone regeneration
12. In vivo wear of polyethylene glenoid components in total shoulder arthroplasty
13. Optical methods to study the behaviour of supported metallocene catalysts during olefin polymerisation
14. Interfacial studies of carbon fibre / polycarbonate composites using dynamic mechanical analysis
15. Radical crosslinking during polyhydrosilylation between fluorinated and silicone molecules: a model study
16. Unsteady bi-directional heat transfer with heat generation by crystallization in high-density polyethylene
17. Synthesis and characterization of highly branched polymethacrylates via self-condensing oxyanionic copolymerization
18. Use of mesoporous silica as a reinforcing agent in rubber compounds
19. Relationship between structural evolution and rheological measurements for polymer + organoclay nanocomposites
20. Fast HPLC analysis of poly(ethylene oxide)s for highthroughput experimentation
21. Thermo-responsive polymers and hydrogels in tissue engineering
22. Effects of photo-oxidation on tensile deformation behaviour in low-density polyethylene
23. Wetting of bioactive glass surfaces by poly(α-hydroxyacid) melts: interaction between Bioglass® and biodegradable polymers
24. Modification of polymers by ultrasound treatment in aqueous solution
25. Synthesis and characterization of poly(methyl methacrylate) obtained by ultrasonic irradiation
26. Potentials of solvation of macromolecules as a measure of intermolecular interactions under viscous flow conditions
27. Magnetic colloids: preparation and biomedical applications
28. Alginate hydrogel – candidate support for cell transplantation
29. Carbon composite material and polysulfone modified by nano-hydroxyapatite
30. Sulfonated poly(arylene thioether ketone ketone sulfone)s for proton exchange membranes with high oxidative stability
31. Simulation of the shrinkage of dental polymeric composites
32. Kinetic investigation of styrene emulsion polymerization with surface-active polyelectrolytes as emulsifier, 1 Kinetic study
33. Cyclodextrin in polymer chemistry: Kinetic studies on the free-radical polymerization of cyclodextrin-complexed styrene from homogeneous aqueous solution
34. Atom transfer radical polymerization of styrene initiated by the novel initiator 2-bromo-2-nitropropane
35. Synthesis, characterization and ring-closing depolymerization of furanic polyesters
36. Novel, biocompatible polyether(meth)acrylate-based formulations for stereolithography – A new flexible material class for three-dimensional applications
37. Poly(vinyl alcohol) nanofibres by electrospinning: influence of molecular weight on fibre shape
38. Scanning electron microscopy investigation of tooth/filling bonding
39. Comparison of two algorithms for calculation of the apparent rate constant in the kinetic modelling of diallyl terephthalate bulk polymerization
40. A facile method to prepare methylcellulose from annual plants and wood using iodomethane
41. High-throughput screening of the chemical composition distribution of random styrene-butyl acrylate copolymers
42. SEC/MALDI-TOF Mass spectrometry study of hydroxy-, carboxy- and methyl ester-terminated aliphatic polyesters
43. Self-ignition of polymerization fronts with convection: the ‘rainstorm effect’
44. Separation of linear and star-shaped polystyrenes by two-dimensional chromatography
45. ‘Surfactant-free’ stable nanoparticles from biodegradable and amphiphilic poly(ε-caprolactone)-grafted dextran copolymers
46. The effect of curing on sorption and diffusion of a brake fluid in EPDM elastomer
47. New supramolecular crystalline polymer structure of syndiotactic polystyrene
48. A new approach to multiblock copolymers using atom transfer radical coupling
49. Enhancement of sensitivity and selectivity in surface plasmon resonance detection of a DNA point mutation by polymeric microspheres
50. Synthesis of fructooligosaccharide-based plastic films starting from inulin
51. Silica-coating of fluorescent polystyrene microspheres by a modified Stöber method and their stability against photobleaching
52. Three-dimensional numerical simulation of viscoelastic flow through an abrupt contraction geometry
53. Development of high-temperature separation techniques for the chemical composition analysis of ethylene - methyl methacrylate block copolymers
54. Starch-based multiphase polymer materials
55. Structural study of semi-crystalline blends of poly(vinylidene fluoride) and poly(methyl methacrylate) by means of linear correlation and interface distribution functions
56. Molar mass characterization of hydrophilic copolymers, 2 Size exclusion chromatography of cationic (meth)acrylate copolymers
57. Macrocyclic oligomers of an aromatic polyetherketone based on bisphenol A and difluorobenzophenone
58. Structure and thermodynamic modelling of Pluronic L64 solutions
59. Plasma-bonding of poly(dimethylsiloxane) to glass
60. Magnetic poly(glycidyl methacrylate) microspheres for Campylobacter jejuni detection in food
61. Coagulation kinetics and the stability of surfactant-free emulsion-polymerised latexes
62. Extraction and characterization of polysaccharides from Mesembryanthemum crystallinum
63. Preparation of fluorescent polymer particles by emulsion polymerization
64. Power-law distribution of molecular weights of nonlinear emulsion polymers
65. Synthesis and characterization of novel organosoluble aromatic copolyimides
66. Thermodynamic and electrochemical study of multicomponent polymer complexes of varying composition
67. Adsorption of monodisperse polybutadienes on carbon black, 3 Displacement of pre-adsorbed molecules by the same polymer. Conformational and molecular weight effects
68. Microwave-assisted synthesis of channel-containing polymeric materials
69. Carbon-chain polymers ‘grafting from’ inorganic nanoparticles
70. Microwave-assisted nitroxide-mediated polymerization of alkyl acrylates
71. Drug-loaded ultrafine poly(vinyl alcohol) fibre mats prepared by electrospinning
72. COPOINT – a simple computer program to determine copolymerization parameters by numerical integration
73. Antimicrobial activity of polystyrene particles coated by photo-crosslinked block copolymers containing a biocidal polymethacrylate block
74. Surface functionalization by smart binary polymer brushes to tune physico-chemical characteristics at biointerfaces
75. Self-organization of poly(N-isopropylacrylamide)-carrying microspheres into two-dimensional colloidal thin films
76. Surface sulfate groups on poly(methyl methacrylate) and poly(vinyl acetate) particles from soap-free emulsion polymerization
77. Bis(vinylcyclopropane) and bis(methacrylate) monomers with cholesteryl group for dental composites
78. Determination of chemical composition and molar mass distribution of random styrene-ethyl acrylate copolymers by high-throughput liquid chromatography
79. Facile synthesis of potato starch sulfate magnesium salts
80. Kinetics and mechanism of miniemulsion polymerization of a sparingly water-soluble fluoro monomer
81. Characterization, structural transitions and properties of a tightly crosslinked polythiourethane network for optical applications
82. A highly efficient, solvent-free and energy-effective method of cellulose acetylation
83. Poly(L,L-lactide) and poly(L,L-lactide-co-glycolide) microparticles by dialysis
84. Synthesis and characterization of 4- and 6-arm star-shaped poly(ε-caprolactone)s
85. Morphology of nanocomposites from ethylene-acrylic acid copolymers
86. Gelation of thermoplastic polyurethane/2-butanone solutions
87. Education
88. Continuous Addition Polymerization