Design of Noise Filters for Integrating Time Delay Processes
-
Ediga Chandramohan Goud
Abstract
In this research, a second order noise filter is designed for reducing the noise effect on PID controlled Integrating plus time delay (IPTD), Integrating plus first order plus time delay (IFOPTD), Double integrating plus time delay (DIPTD) processes. The second order noise filter time constant is designed based on an iterative approach, which is a function of loop gain crossover frequency (
References
[1] Rao AS, Rao VS, Chidambaram M. Direct synthesis-based controller design for integrating processes with time delay. J Franklin Inst. 2009;346:38–56.10.1016/j.jfranklin.2008.06.004Search in Google Scholar
[2] Vanavil B, Anusha AV, Perumalsamy M, Rao AS. Enhanced IMC-PID controller design with lead-lag filter for unstable and integrating processes with time delay. Chem Eng Commun. 2014;201:1468–96. DOI:10.1080/00986445.2013.818983.Search in Google Scholar
[3] Visioli A. Optimal tuning of PID controllers for integral and unstable processes. IEE Proc - Control Theory Appl. 2001;148:180–4. DOI:10.1049/ip-cta:20010197.Search in Google Scholar
[4] Arrieta O, Vilanova R, Visioli A. Proportional-integral-derivative tuning for servo/regulation control operation for unstable and integrating processes. Ind Eng Chem Res. 2011;50:3327–34. DOI:10.1021/ie101012z.Search in Google Scholar
[5] Ali A, Majhi S. PID controller tuning for integrating processes. ISA Trans. 2010;49:70–8. DOI:10.1016/j.isatra.2009.09.001.Search in Google Scholar PubMed
[6] Chakraborty S, Ghosh S, Naskar AK. All-PD control of pure Integrating Plus Time-Delay processes with gain and phase-margin specifications. ISA Trans. 2017;68:203–11.10.1016/j.isatra.2017.01.031Search in Google Scholar PubMed
[7] Nasution AA, Jeng J-C, Huang H-P. Optimal H2 IMC-PID controller with set-point weighting for time-delayed unstable processes. Ind Eng Chem Res. 2011;50:4567–78. DOI:10.1021/ie1021688.Search in Google Scholar
[8] Anusha AV, Rao AS. Design and analysis of IMC based PID controller for unstable systems for enhanced closed loop performance, vol. 2. IFAC, 2012. DOI:10.3182/20120328-3-IT-3014.00007.Search in Google Scholar
[9] Seshagiri Rao A, Chidambaram M. PI/PID controllers design for integrating and unstable systems, chapter 3. PID Control Third Millenn Adv Ind Control. 201210.1007/978-1-4471-2425-2_3Search in Google Scholar
[10] Wang Q, Lu C, Pan W. IMC PID controller tuning for stable and unstable processes with time delay. Chem Eng Res Des. 2016;105:120–9. DOI:10.1016/j.cherd.2015.11.011.Search in Google Scholar
[11] Ghousiya Begum K, Seshagiri Rao A, Radhakrishnan TK. Enhanced IMC based PID controller design for non-minimum phase (NMP) integrating processes with time delays. ISA Trans. 2017;68. doi:10.1016/j.isatra.2017.03.005.Search in Google Scholar PubMed
[12] Graebe SF, Isaksson AJ. Derivative filter is an integral part of PID design. IEE Proc - Control Theory Appl. 2002;149:41–5. DOI:10.1049/ip-cta:20020111.Search in Google Scholar
[13] Astrom K, Hagglund T. Advanced PID control. Research Triangle Park, NC: International Society of Automation, 2005.Search in Google Scholar
[14] Skogestad S. Tuning for smooth PID control with acceptable disturbance rejection. Ind Eng Chem Res. 2006;45:7817–22. DOI:10.1021/ie0602815.Search in Google Scholar
[15] Micić AD, Mataušek MR. Optimization of PID controller with higher-order noise filter. J Process Control. 2014;24:694–700. DOI:10.1016/j.jprocont.2013.10.009.Search in Google Scholar
[16] Segovia VR, Hägglund T, Åström KJ. Measurement noise filtering for common PID tuning rules. Control Eng Pract. 2014;32:43–63. DOI:10.1016/j.conengprac.2014.07.005.Search in Google Scholar
[17] Segovia VR, Hägglund T, Åström KJ. Measurement noise filtering for PID controllers. J Process Control. 2014;24:299–313. DOI:10.1016/j.jprocont.2014.01.017.Search in Google Scholar
[18] Micić AD, Mataušek MR. Closed-loop PID controller design and performance assessment in the presence of measurement noise. Chem Eng Res Des. 2015;104:513–8. DOI:10.1016/j.cherd.2015.09.014.Search in Google Scholar
[19] Garpinger O, Hägglund T. Software-based optimal PID design with robustness and noise sensitivity constraints. J Process Control. 2015;33:90–101. DOI:10.1016/j.jprocont.2015.06.001.Search in Google Scholar
[20] Huba M. Filter choice for an effective measurement noise attenuation in PI and PID controllers. 2015 IEEE International Conference on Mechatronics (ICM), 46–51. IEEE, 2015. DOI:10.1109/ICMECH.2015.7083946.Search in Google Scholar
[21] Bisták P, Huba M. Analysis of higher derivative degree PID controllers via virtual laboratory. 2019 27th Mediterranean Conference on Control and Automation (MED), 256–61. IEEE, 2019. DOI:10.1109/MED.2019.8798527.Search in Google Scholar
[22] Larsson PO, Hägglund T. Control signal constraints and filter order selection for PI and PID controllers. Proceedings of the 2011 American Control Conference, 4994–9. IEEE, 2011. DOI:10.1109/ACC.2011.5991112.Search in Google Scholar
[23] Liu TF. Closed-loop step response identification of integrating and unstable processes. Chem Eng Sci. 2010;65:2884–95.10.1016/j.ces.2010.01.013Search in Google Scholar
© 2019 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Editorial
- NOTE FROM GUEST EDITORS
- Research Articles
- Kinetic Modeling of Citrullus Lanatus (Watermelon) Peel Using Thermo Gravimetric Analysis
- Numerical Evaluation of Liquid Mixing in a Serpentine Square Convergent-divergent Passive Micromixer
- Design of Noise Filters for Integrating Time Delay Processes
- Fractional Order PID Controller Design for Multivariable Systems using TLBO
- Natural Convection Heat Transfer in a Shell and Helical Coil Heat Exchanger Using non-Newtonian Nanofluids
- Numerical Investigation of Heat Transfer and Fluid Flow Characteristics in Circular Wavy Microchannels with Sidewall Rib
- Design of Fractional Order PID Controller Using Genetic Algorithm Optimization Technique for Nonlinear System
- Design of VRFT Based Feedback-feedforward Controllers for Enhancing Disturbance Rejection on Non-minimum Phase Systems
- Simultaneous Scheduling and Heat Integration of Batch Plants Using Unit-Specific Event Based Modelling
- Multi Gene Genetic Program Modelling on L-Asparaginase Activity of Bacillus Stratosphericus
- Enhancement of Glass Production Rate in Joule Heated Ceramic Melter
- Thermographic Studies of Aerogel Composites
Articles in the same Issue
- Editorial
- NOTE FROM GUEST EDITORS
- Research Articles
- Kinetic Modeling of Citrullus Lanatus (Watermelon) Peel Using Thermo Gravimetric Analysis
- Numerical Evaluation of Liquid Mixing in a Serpentine Square Convergent-divergent Passive Micromixer
- Design of Noise Filters for Integrating Time Delay Processes
- Fractional Order PID Controller Design for Multivariable Systems using TLBO
- Natural Convection Heat Transfer in a Shell and Helical Coil Heat Exchanger Using non-Newtonian Nanofluids
- Numerical Investigation of Heat Transfer and Fluid Flow Characteristics in Circular Wavy Microchannels with Sidewall Rib
- Design of Fractional Order PID Controller Using Genetic Algorithm Optimization Technique for Nonlinear System
- Design of VRFT Based Feedback-feedforward Controllers for Enhancing Disturbance Rejection on Non-minimum Phase Systems
- Simultaneous Scheduling and Heat Integration of Batch Plants Using Unit-Specific Event Based Modelling
- Multi Gene Genetic Program Modelling on L-Asparaginase Activity of Bacillus Stratosphericus
- Enhancement of Glass Production Rate in Joule Heated Ceramic Melter
- Thermographic Studies of Aerogel Composites
