Article
Open Access
Stochastic MMSIF of multiple edge cracks FGMs plates subjected to combined loading using XFEM
-
Achchhe Lal
and
Kundan Mishra
Published/Copyright:
June 8, 2020
Received: 2019-12-01
Accepted: 2020-05-03
Published Online: 2020-06-08
© 2020 Achchhe Lal et al., published by De Gruyter
Articles in the same Issue
- Research Articles
- Nonlinear flexural analysis of sandwich beam with multi walled carbon nanotube reinforced composite sheet under thermo-mechanical loading
- Investigation of structural performance subjected to impact loading using finite element approach: case of ship-container collision
- The effect of fluid saturation on the elastic-plastic properties of oil reservoir rocks
- Stochastic MMSIF of multiple edge cracks FGMs plates subjected to combined loading using XFEM
- Finite-difference equations of quasistatic motion of the shallow concrete shells in nonlinear setting
- Solving biharmonic problems on irregular domains by stably evaluated Gaussian kernel
- Geometrical analysis of architectural drawnings in the Shah-mosque Isfahan
- Non-linear deflection and stress analysis of laminated composite sandwich plate with elliptical cutout under different transverse loadings in hygro-thermal environment
- Free-edge effects of corrugated laminates
- Nonlinear magneto-thermo-elastic vibration of mass sensor armchair carbon nanotube resting on an elastic substrate
- Comparative and contrast study of Karbandie’s Masonry ribs brick arrangements
- A study on damping ratio of EPS foam filled CFRP composite tubes
- Tensile analysis and assessment of carbon and alloy steels using FE approach as an idealization of material fractures under collision and grounding
- Shell and spatial structures: Between new developments and historical aspects
- Generalised assumed strain curved shell finite elements (CSFE-sh) with shifted-Lagrange and applications on N-T’s shells theory
- Optimization of diagrid geometry based on the desirability function approach
- Shell and spatial structures: Between new developments and historical aspects
- Shell-supported footbridges
- Geodesic domes for planetary exploration
- Pressure modes for hyperbolic paraboloid roofs
- Geometrically nonlinear behavior of lattice domes coupled with local Eulerian instability
Keywords for this article
FGMs plate;
extended finite element method;
multiple edge cracks;
mixed mode stress intensity factor;
coefficient of variance;
second order perturbation technique
Creative Commons
BY 4.0
Articles in the same Issue
- Research Articles
- Nonlinear flexural analysis of sandwich beam with multi walled carbon nanotube reinforced composite sheet under thermo-mechanical loading
- Investigation of structural performance subjected to impact loading using finite element approach: case of ship-container collision
- The effect of fluid saturation on the elastic-plastic properties of oil reservoir rocks
- Stochastic MMSIF of multiple edge cracks FGMs plates subjected to combined loading using XFEM
- Finite-difference equations of quasistatic motion of the shallow concrete shells in nonlinear setting
- Solving biharmonic problems on irregular domains by stably evaluated Gaussian kernel
- Geometrical analysis of architectural drawnings in the Shah-mosque Isfahan
- Non-linear deflection and stress analysis of laminated composite sandwich plate with elliptical cutout under different transverse loadings in hygro-thermal environment
- Free-edge effects of corrugated laminates
- Nonlinear magneto-thermo-elastic vibration of mass sensor armchair carbon nanotube resting on an elastic substrate
- Comparative and contrast study of Karbandie’s Masonry ribs brick arrangements
- A study on damping ratio of EPS foam filled CFRP composite tubes
- Tensile analysis and assessment of carbon and alloy steels using FE approach as an idealization of material fractures under collision and grounding
- Shell and spatial structures: Between new developments and historical aspects
- Generalised assumed strain curved shell finite elements (CSFE-sh) with shifted-Lagrange and applications on N-T’s shells theory
- Optimization of diagrid geometry based on the desirability function approach
- Shell and spatial structures: Between new developments and historical aspects
- Shell-supported footbridges
- Geodesic domes for planetary exploration
- Pressure modes for hyperbolic paraboloid roofs
- Geometrically nonlinear behavior of lattice domes coupled with local Eulerian instability
