Haptically enhanced VR surgical training system

Articles in the same Issue

1. The Kv10.1 voltage-gated ion channel modeling based on control system theory
2. Assessment of accuracy and glycemic control of FGM and CGM and impact on mental well-being
3. From Self-supervised Learning to Transfer Learning with Musculoskeletal Radiographs
4. Iron oxide nanoparticles with supramolecular ureidopyrimidinone coating
5. Generative-Adversarial-Network-Based Data Augmentation for the Classification of Craniosynostosis
6. Cold plasma as a fast acting alternative disinfection method
7. Dry-fog disinfection as a method for processing vehicles for passenger transport
8. 3D printed microfluidic modules: passive mixers and cells encapsulation in alginate
9. First-cycle oscillation excursions of Pickering-stabilised microbubbles subjected to a high-amplitude ultrasound pulse
10. Monitoring the gelation of gellan gum with torsion rheometry and brightness-mode ultrasound
11. Impact of the fiber cutting angle on fiber optic proximity sensors in endoscopy
12. Micro-computed tomography and brightness-mode ultrasound show air entrapments inside tablets
13. Feature-based Differentiation of Malignant Melanomas, Lesions and Healthy Skin in Multiphoton Tomography Skin Images
14. Segmentation of Living and ablated Tumor parts in CT images Using ResLU-Net
15. Blood Pressure Estimation based on Electrocardiograms
16. Steerable Flexible Laparoscope to Facilitate Camera Guidance During Minimally Invasive Procedures
17. Evaluation of methods for 3D imaging and analysis of vascularisation in biopreparations
18. Ankle Rehabilitation Robotic Systems for domestic use – a systematic review
19. Detection and Segmentation of Heterogeneous Bone Tumours in Limited Radiographs
20. Fragmentation thresholds simulated for antibubbles with various infinitesimal elastic shells
21. On the use of singular value decomposition for QRS detection and ECG denoising
22. Acquisition and Processing of Biomedical Data for Outpatient Care in Rural Areas
23. Temperature-induced modulation of the electrophysiological behavior of A549 lung cancer cells
24. Experimental setup for the ultrasonic fractionation of flowing whole blood in a capillary
25. A validation study for a consumer-grade auditory-visual stimulation device
26. A Large-scale Virtual Patient Cohort to Study ECG Features of Interatrial Conduction Block
27. Onset Detection of Pulse-Shaped Bioelectrical Signals Using Linear State Space Models
28. An online movement and tremor identification algorithm for evaluation during deep brain stimulation
29. “Are you breathing?” – Design, build and testing of a low-cost, portable respiratory rate monitor
30. A new method for OCT Imaging of the Eustachian tube
31. Explaining Machine Learning Predictions of Decision Support Systems in Healthcare
32. Proof-of-Concept Study for Reflectance Pulse Oximetry Using Optical-Fibre-Based Sensors
33. Simultaneous measurement of DC-EEG and transcutaneous pCO2
34. Improving Equine Intramedullary Nail Osteosynthesis via Fracture Adjacent Polymer Reinforcement
35. Refining the Eikonal Model to Reproduce the Influence of Atrial Tissue Geometry on Conduction Velocity
36. A Six Degree of Freedom Extrusion Bioprinter
37. A participatory approach to redesign a tube connecting system for home parental nutrition
38. Visualization of platelet deposition in a flow chamber
39. Cost-utility Analysis of Home Mechanical Ventilation Compared to Hospital Settings in Patients with Amyotrophic Lateral Sclerosis
40. The Design of an Avatar in a Multiplayer Serious Game
41. Digital Light Processing of Round Window Niche Implant Prototypes for Implantation Studies
42. Multiple parallel hidden layers autoencoder for denoising ECG signal
43. Criteria for Implant Fit Assessment in Total Knee Arthroplasty – A Review
44. Development of an AI-supported exercise therapy for advanced cancer patients
45. Continuous error processing during a closed-loop 2D tracking task
46. Topology-optimized patient-specific osteosynthesis plates
47. The influence of PEGDA’s molecular weight on its mechanical properties in the context of biomedical applications
48. Towards Test Bench for Aspiration Catheters in Realistic Evaluation Scenarios
49. Preliminary validation system for cuffless blood pressure measurement
50. Hologram accuracy evaluation of HoloLens 2 for thermal imaging in medical applications
51. Impact of Annotation Noise on Histopathology Nucleus Segmentation
52. Muscle fatigue detection using near-infrared spectroscopy and electromyography
53. Cross-spectral analysis quantifies the segmental coordination in unstable sitting
54. Clinical utility of gait stability measures: Selection and preliminary evaluation of the margin of stability
55. Development of a Venous Collapse Prevention Device for Blood Draw
56. Development of a compact sterilization and shredding machine for infectious or toxic wastes (MACS 800)
57. Improved Global Navigation Satellite System filtering methods for the mobile six-minute walk test
58. Augmented Reality for 6-DoF Motion Recording, Preview, and Execution to Enable Intuitive Surgical Robot Control
59. Explaining and Evaluating Deep Tissue Classification by Visualizing Activations of Most Relevant Intermediate Layers
60. LA-TT-EALR / PromCERA: Comparison of preoperatively performed electrically evoked auditory potentials at the brainstem and cortical level during local anesthesia
61. Artificial Prostate Tissue for the Simulation of the Transurethral Resection of the Prostate
62. A concept and technical requirements for the Temi platform supporting care and nursing
63. Wearable Wake-up System for CCHS Patients
64. Novel replaceable EEG electrode system
65. Evaluation of the influence of the nasal cavity in flow simulations of the upper airway of a sleep apnea patient
66. Bad channel detection in EEG recordings
67. Investigation of everyday influencing factors on the variability of exhaled breath profiles in healthy subjects
68. 360° Laparoscopic Imaging System to Facilitate Camera Control and Orientation in Minimally Invasive Surgery
69. Investigation of an Acceleration Pipeline for Single Fiber Action Potential Simulation
70. Feedback Linearization of a Blower in an Anesthesia Workstation
71. YOLO networks for polyp detection: A human-in-the-loop training approach
72. Effect of enzymatic degradation and hydrolysis on 3D-printed resin-based composite material for temporary dental crowns and bridges
73. Supervised Machine Learning for Predicting Carbohydrate Malabsorptions Using Hydrogen Breath Tests
74. Susceptibility artifacts evaluation for non-metallic biopsy needles in a biological-engineered 3D tumor model
75. Towards the Development of a Medical App for the Detection of Diabetic Foot Syndrome and Pressure Ulcers
76. A time-resolved fibrosis model – in vitro assessment of antifibrotic implant coatings
77. Work space analysis of a new instrument for Natural Orifice Transluminal Endoscopic Surgery (NOTES)
78. Prediction of Fluorescent Ki67 Staining in 3D Tumor Spheroids
79. MEMS Magnetic Field Source for Frequency Conversion Approaches for ME Sensors
80. Evaluation of spatio-temporal electrocutaneous warning signals
81. Automatic Localization of an Ultrasound Probe with the Help of Magnetic Sensors
82. Automatic detection of foreign objects and contaminants in colonoscopic video data using deep learning
83. Differentiation of COVID-19 Conditions using Mediastinum Shape in Chest X-ray Images
84. Annotation Efforts in Image Segmentation can be Reduced by Neural Network Bootstrapping
85. Automatic detection of subviral particles in fluorescence microscopy images of Marburg virus infected cells using a convolutional neural network
86. Development of a pain journal for chronic pain management and remote monitoring
87. Analysis of Dielectric Properties of Gelatin-based Tissue Phantoms
88. Robust Colon Tissue Cartography with Semi-Supervision
89. Home rehabilitation system for the upper extremity focusing on technology-aided assessment of spasticity
90. IEEE 11073 SDC for Pandemics like COVID-19: Example Implementation of an Isolation Room
91. Thermal annealing of injection molded VHMW PLLA
92. Characterization of Ball-milled Poly(Nisopropylacrylamide) Nanogels
93. Fiber orientation on 3D structured collectors for electrospinning
94. Design study of dynamic mechanical test bench specimen grips
95. PLLA crystallization kinetics in dependence of molecular weight
96. Mathematical lung model for local gas exchange based on EIT-measurements
97. A concept to combine a gamma probe with ultrasound imaging for improved localization of sentinel lymph nodes: a feasibility study of the concept
98. Novel Procedure for Determining the Finger Force in Flexion Depending on the Finger Position
99. Comparison of the Y-90 brachytherapy and Ir-192 brachytherapy of skin tumors: a simulation study
100. Biological test methods for stents: cellular responses to microstructured biomaterials
101. KneTex – Improvements to classification methods for a sensor system for rehabilitation after ACL surgery
102. Automated human temporal-bone experiments
103. Pressure sensor catheter based on Fiber Tip Fabry-Pérot-Interferometer and Fiber Bragg Grating for temperature compensation
104. Stochastic variational deep kernel learning based diabetic retinopathy severity grading
105. Biomarkers based on continuous non-invasive blood pressure - review and outlook
106. Augmented Reality Application for Simulation of Mamma Palpation
107. Suitability Testing of the LucidGloves Prototype 4 for Extended Reality Medical Teaching
108. Camera-based Pain Assessment during Surgical Interventions
109. Apnea detection from photoplethysmography signal using dicrotic notch
110. Using a single inertial sensor to control exergames for children with cerebral palsy
111. Long Term Evaluation of the Barrier Properties of Polymer/Metal Oxide Hybrid Layers for Use in Medical Implants
112. Methods of Contactless Blood Pressure Measurement
113. Influence of crosslinking on the drug release of PLLA/gelatin nonwovens
114. In vitro biostability of cardiac pacemaker lead insulations under static mechanical loading
115. A Concept for 6D Motion Sensing with Magnetoelectric Sensors
116. Water-supported femtosecond laser ablation of Nitinol for cardiovascular stents
117. Investigation of Inertial Cavitation Induced by Modulated Focused Ultrasound Stimuli
118. Biomechanical Characterization of Human Corneal Lenticules
119. Influence of temperature-dependent tissue parameters on monopolar coagulation model
120. Evaluation of a nonlinear viscoelastic-plastic constitutive model in numerical simulation of thermoplastic polymers for stent application
121. A systematic review of recorded technical settings used in bipolar and monopolar transurethral resection of bladder tumors
122. Smartphone based Monitoring of Pediatric Craniofacial Deformities
123. Remote knee endoprosthesis monitoring – alignment requirements and prototyping of the external readout unit
124. Determination of Infusion Filter Efficiency applying Dynamic Light Scattering
125. Radial compliance of porcine coronary arteries ex vivo under pulsatile flow – perspectives for stent biomechanics
126. Hemoglobin ratio as a forgotten parameter for automatic feedback control systems in preterm neonates
127. Robustness evaluation on different training state of a CNN model
128. KTeXpand – a novel microfluidic device for advanced cell based cross matching
129. Consideration of the generated network utilization of the IEEE 11073 SDC standard
130. A Comparative Overview of Digital Health Applications between Belgium and Germany
131. Validation of a Fluid Structure Interaction Model for TAVR using Particle Image Velocimetry
132. Modelling of a Positive End-Expiratory Pressure Valve with a Voice-coil Actuator
133. Recommendations for the Development of CFD Model to Assess the Thrombogenic Potential of Stents
134. Network Architecture Influence on Facial Emotion Recognition
135. Image-based deep learning of finite element simulations for fast surrogate biomechanical organ deformations
136. Introducing micro physiological systems to evaluate new radiopharmaceuticals: A binding study with radiolabeled cetuximab
137. Analysis on the effect of eye globe diameters on the biomechanics of posterior ocular tissues during horizontal adduction
138. Towards Identification of Biometric Properties in Blood Flow Sounds Using Neural Networks and Saliency Maps
139. Home Monitoring of the Carotid Arteries Using a Mobile Auscultation Device with App
140. Analysing attention convolutional neural network for surgical tool localisation: a feasibility study
141. Development of an EMG-based Elbow- Exoskeleton with Twisted String Actuation
142. Surface analysis of different O₂-activated polyurethane-co-silicones using XPS
143. Reduced Steering Performance in Magnetic Drug Targeting Induced by Shielding Arising from Accumulation of Particles
144. On Gait Stability: Correlations between Lyapunov Exponent and Stride Time Variability
145. Ultrasound-Mediated Cavitation of Magnetic Nanoparticles for Drug Delivery Applications
146. Design of an experimental platform of gait analysis with ActiSense and StereoPi
147. Characterization of Using Infused PLA for 3D Printed Radiation Shielding
148. Bone ablation using a Ho:YAG laser
149. XPS-Analysis of solvent residues in different polymeric biomaterials
150. Thyroid Nodule Region Estimation using Auto-Regressive Modelling and Machine Learning
151. Femtosecond laser manufacturing technology for microstents as innovative medical devices to treat open-angle glaucoma
152. Saliency-assisted multi-label classification for explainable deep learning applications in endoscopic ENT navigation
153. Design considerations and applications of a biomedical test bench development kit
154. Neonatal seizure detection algorithms: The effect of channel count
155. Experiences of intercultural teaching activities in the field of eHealth
156. Magnetic extraction of calcium oxalate crystals with iron oxide nanoparticles
157. Tiffeneau-Testing by means of a Smart-Shirt
158. Bioengineering of Tubes, Rings and Panels for Guided Bone and Vascular Regeneration
159. Modeling and Error Analysis in Camera-Based Jump Height Measurement
160. Microstent for minimally invasive treatment of Fallopian tube occlusions – porcine implantation ex vivo
161. Microscale Sensor Fabrication on Curved Needle Surfaces
162. Full-field electroretinography examinations of the human eye with the eye diagnostic device PEP-2000 – First results
163. Concept for a retractor with force indicator for reduction of tissue trauma in abdominal surgery
164. Neural Network Classification of Surgical Tools in Gynecological Videos
165. Pupillometry examinations of the human eye with the eye diagnostic device PEP-2000 – First results
166. Denoising of ECG with single and multiple hidden layer autoencoders
167. Hybrid polymer vessel phantoms for feasibility studies and clinical training of MRI-guided interventions
168. Contributions beyond spectral alterations to sEMG fatigue detectors
169. Chemical characterization of plasma polymerized allylamine coatings with addition of ammonia and oxygen by XPS
170. Transfer Learning in Facial Emotion Recognition: Useful or Misleading?
171. Simulation study of inflation of a high compliant balloon inside idealized non-linear tissue geometry
172. Attention Networks for Improving Surgical Tool Classification in Laparoscopic Videos
173. Development of Internationalized Teaching and Training Modules for Healthcare Professionals
174. Pulsatile flow testing of heart valve prostheses in vitro
175. Challenging requirements and optical depth estimation techniques in laparoscopy
176. Towards Analytically Computable Quality Classes for MCG Sensor Systems
177. C-Fibre stimulation and recording of abdominal, autonomic nerves
178. Local field potentials of the auricular Vagus nerve - In-silico stimulation and recording
179. Inference runtime of a neural network to detect atrial fibrillation on customized RISC-V-based hardware
180. COVID-19 Pneumonia Phenotypes Detection with Electrical Impedance Tomography
181. Hydrophilic Nanofibrous Poly(ether-blockamide) for Biomedical Applications
182. Blood vessel detection using hyperspectral imaging
183. Control of a blower-based lung simulator for testing of mechanical ventilators
184. Interpretation of ResNet50 model for MI related cardiac events using Explainable Grad-CAM approach
185. Brain activity and event-related potential analysis in healthy and spinal cord-injured individuals
186. Cardiovascular, ophthalmologic and otolaryngologic medical device innovations – Progress report 2022 from the Twenty20 consortium RESPONSE
187. Patch Based Classification of Cell Painted ER and Cytoplasm using Block Intensity Gradient Pattern and Multilayer Perceptron
188. Haptically enhanced VR surgical training system
189. Computation of flow through TAVI device by means of physics informed neural networks
190. A novel reflex analysis of healthy and spinal cord-injured individuals
191. Optimal EEG Segmentation for Microsleep Detection Based on Machine Learning
192. Initial engagement and axial force model for self-tapping bone screws
193. Stretchable electrodes for biopotential measurements in wearable patches
194. Importance of interdisciplinary training for successful development of innovative biomedical implants
195. Thrilling AI – A novel, signal-based digital biomarker for diagnosing canine heart diseases
196. Development of a test rig for the diagnosis of arthritic knee joint defects in the case of lower extremity amputees in orthopaedic technology
197. Simulation of a passive position control for ferromagnetic particles with multiple Halbach rings
198. Holistic Equivalent Circuit Model for Capacitive Extracellular Stimulation
199. Determining the influence of endoskeleton friction on the damping of pulsating antibubbles
200. Separating Respiration and Perfusion in EIT: Harmonic Analysis on 2D-Thorax Simulation
201. On model-based hyperspectral imaging
202. Intelligent Garment based ECG Monitoring with AI support for Elderly
203. Scaling Methods of the Pelvis without Distortion for the Analysis of Bone Defects
204. An End-to-End Deep Leaning Approach for Sleep-Wake Classification Using Single Channel EEG Signals