Development of an antifibrotic drug-eluting coating for a minimally invasive implantable glaucoma microstent

Articles in the same Issue

1. Neighborhood Optimization for Therapy Decision Support
2. Deep Reinforcement Learning for the Navigation of Neurovascular Catheters
3. Gait analysis for early Parkinson’s disease detection based on deep learning
4. Inter-individual variability of EEG features during microsleep events
5. Deep Learning for Prediction of Diaphragm Activity from the Surface Electromyogram
6. Audio waves and its loss of energy in puncture needles
7. Intraoperative Registration of 2D C-arm Images with Preoperative CT Data in Computer Assisted Spine Surgery: Motivation to Use Convolutional Neural Networks for Initial Pose Generator
8. Combination of sensor-embedded and secure server-distributed artificial intelligence for healthcare applications
9. Improvement of Stroke Volume Estimation with Bioimpedance Measurement by LSTM Network Approach Based on ECG during Ergometry
10. Surface EMG-based Surgical Instrument Classification for Dynamic Activity Recognition in Surgical Workflows
11. A computer-assisted optimization approach for orthognathic surgery planning
12. Relationship between core body temperature and heart rate variability in an ultrashort sleep-wake schedule
13. Self-adapting Classification System for Swallow Intention Detection in Dysphagia Therapy
14. Wireless retina implant with large visual field
15. Modification of joint prosthesis surfaces by ultrashort pulse laser treatment for improved joint lubrication
16. Development of an Assistance System for the Intuitive Assessment of Laboratory Findings in Oncology
17. Heart Rate Variability Analysis During Lower Body Negative Pressure Test Induced Central Hypovolemia
18. Influence of ECG Lead Reduction Techniques for Extracellular Potassium and Calcium Concentration Estimation
19. Computer model of oxygenation in neonates
20. MRV-validated numerical flow analysis of thrombotic potential of coronary stent designs
21. Parameter sensitivity analysis on a mathematical model of reepithelialization
22. The effect of dipole housing and feeding wires in physical phantoms for EEG
23. Esophageal electrode model and simulation of directed transesophageal electrical pacing of the spinal cord
24. Surface modification of Polydimethylsiloxane by hydrogels for microfluidic applications
25. HRV (Heart Rate Variability) as a non-invasive measurement method for performance diagnostics and training control
26. Performance of Different Atrial Conduction Velocity Estimation Algorithms Improves with Knowledge about the Depolarization Pattern
27. Camera-based spatial assessment of perfusion upon stimuli
28. Evaluation of machine learning methods for seizure prediction in epilepsy
29. Correlation-based spike sorting of multivariate data
30. Medical device innovations for cardiovascular, ophthalmologic and otolaryngologic applications
31. Tissue biomimicry using cross-linked electrospun nonwoven fibre composites
32. Computational flow analysis of the washout of an aortic valve by means of Eulerian transport equation
33. Learning by Researching – Students enhance perfusionist’s workplace with data glasses in internships
34. Implantomics: A Paradigm Shift in Implantology
35. An actuated larynx phantom for pre-clinical evaluation of droplet-based reflex-stimulating laryngoscopes
36. Usability assessment of patient hoists as a purchasing guide for health facilities
37. Medical robotics simulation framework for application-specific optimal kinematics
38. Evaluation of an IEEE 11073 SDC Connection of two KUKA Robots towards the Application of Focused Ultrasound in Radiation Therapy
39. Industrial robots for teleoperated surgery – a systematic review of existing approaches
40. Towards automated and painless venipuncture – vibratory needle insertion techniques
41. Biodegradable magnetic microspheres for drug targeting, temperature controlled drug release, and hyperthermia
42. Cytotoxicity of Catalysed Silicone Resin Coatings for Smart Biomedical Devices
43. Experimental Study on Cell-free Approach for Articular Cartilage Treatment
44. Computer Assisted Auscultation System for Phonoangiography of the Carotid Artery
45. Investigation of a non-invasive venous blood flow measurement device
46. Intelligent Assistant System for the Automatic Assessment of Fall Processes in Sports Climbing for Injury Prevention based on Inertial Sensor Data
47. 3D Printed Anatomical Model of a Rat for Medical Imaging
48. Reconstruction accuracy of an automated serial cross-sectional preparation technique for morphological human temporal bone imaging
49. Automatic Orientation Estimation of Inertial Sensors in C-Arm CT Projections
50. Impact of lung volume changes on perfusion estimates derived by Electrical Impedance Tomography
51. Dynamic image analysis of transparent particles released during the simulated use test of cardiovascular devices
52. Modeling and Analysis of a Visual Feedback System to Support Efficient Object Grasping of an EMG-Controlled Prosthetic Hand
53. First Steps towards Localized Opening of the Blood-Brain-Barrier by IR Laser Illumination Through the Rodent Skull
54. Development of an antifibrotic drug-eluting coating for a minimally invasive implantable glaucoma microstent
55. Construction of a novel microfluidic experimental setup for testing recent glaucoma drainage devices
56. Quantifying the uncertainty of deep learning-based computer-aided diagnosis for patient safety
57. Using Deep Correlation Features to define the Meta Style of Cell Images for Classification
58. Computer Aided Detection of Polyps in Whitelight- Colonoscopy Images using Deep Neural Networks
59. 3d print of heart rhythm model with cryoballoon catheter ablation of pulmonary vein
60. OmniPD: One-Step Person Detection in Top-View Omnidirectional Indoor Scenes
61. Assessment of 4D Ultrasound Systems for Image-guided Radiation Therapy – Image Quality, Framerates and CT Artifacts
62. Preliminary Study on 3D printing of PEGDA Hydrogels for Frontal Sinus Implants using Digital Light Processing (DLP)
63. Development and manufacturing of a custom made implant regarding the new European Medical Device Regulation
64. Mobile System for the Prevention, Diagnosis, and Personalized Treatment of Neck Pain Under a Patient’s Everyday Life Circumstances
65. Validation System for Digital Stethoscopes
66. A Piezoelectric Flexural Plate Wave (FPW) Bio-MEMS Sensor with Improved Molecular Mass Detection for Point-of-Care Diagnostics
67. Microphysiological system for heart tissue - going from 2D to 3D culture
68. An Evaluation of Image Feature Detectors Based on Spatial Density and Temporal Robustness in Microsurgical Image Processing
69. Development of a modular Decubitus Prophylaxis System: DekuProSys
70. Automated detection of bone splinters in DEXA phantoms using deep neural networks
71. Integrating Label Uncertainty in Ultrasound Image Classification using Weighted Support Vector Machines
72. Catheter pose-dependent virtual angioscopy images visualized on augmented reality glasses
73. Temperature Controlled and Monitored Ex Vivo Lung Perfusion System for Research and Training Purposes
74. Cytotoxicity and Sterilization Resistance of Electronic Components for Disposable Smart Biomedical Devices
75. Aspects of Multimodal Hybrid Biomaterials
76. Superparamagnetic Iron Oxide Nanoparticles
77. Covalent coupling of polymers as drug coatings on silicone surfaces for future applications
78. Controlled biodegradation of metallic biomaterials by plasma polymer coatings using hexamethyldisiloxane and allylamine monomers
79. Thermomechanical properties of PEGDA in combination with different photo-curable comonomers
80. Formation and characterisation of hydrogel diffusion channels for directed drug delivery
81. Post-processed chemical treatment of polyimide electrospun nonwovens with ethylenediamine for biomedical applications
82. Safety evaluation of resveratrol as an active compound for drug-eluting cardiovascular implants
83. Application of 3R principles in small animal GLP testing of biomaterials
84. Evaluation of MRI-compatible pneumatic muscle stepper motors
85. Development and Validation of Bone Models using Structural Dynamic Measurement Methods
86. Kinematics of the Lumbo–Pelvic Complex under Different Loading Conditions
87. Determination of the hyperelastic material behavior of hydrogel specimens for expandable lens implants
88. Investigation of mechanical and magnetophoretic focusing for magnetic flow cytometry
89. Removal of ECG artifacts from EMG signals with different artifact magnitudes by template subtraction
90. Electrical Dipole Source Localization using Hybrid Least Squares Method in combination with ICA
91. Multiscale Parameter Estimation (msPE) of QRS complexes distorted by magnetohydrodynamic effects at 7 Tesla
92. Automatic differentiation between Veress needle events in laparoscopic access using proximally attached audio signal characterization
93. Local blood flow analysis and visualization from RGB-video sequences
94. Evaluation of inertial Sensors and optical measurement methods for head and shoulder angle motion analysis
95. Foetal heart rate assessment by empirical mode decomposition and spectral analysis
96. An efficient ECG Denoising method using Discrete Wavelet with Savitzky-Golay filter
97. A microphysiological system to investigate the pressure dependent filtration at an artificial glomerular kidney barrier
98. Generation of an azide-modified extracellular matrix by adipose-derived stem cells using metabolic glycoengineering
99. Feasibility test of Dynamic Cooling for detection of small tumors in IR thermographic breast imaging
100. Simulation of Breathing Patterns and Classification of Sensor Data for the early detection of impending Sudden Infant Death
101. Predicting Surgical Phases using CNN-NARX Neural Network
102. A Hybrid Mock Circulation for Control Algorithms of Ventricular Assist Devices
103. Interactive Image Segmentation for Cochlea Implant Planning based on DVT Data
104. Quantitative Imaging of the Iron-Oxide Nanoparticle- Concentration for Magnetic Drug Targeting Employing Inverse Magnetomotive Ultrasound
105. Automatic image analysis system to measure wound area in vitro
106. Automated alignment detection of an additively manufactured Z-frame marker to process instrument targeting signals in interventional MRI
107. Remotely controllable phantom rotation system for ultra-high field MRI to improve Cross Calibration
108. Probabilistic Estimation of Human Interaction Needs in Context of a Robotic Assistance in Geriatrics
109. Universal LIMS based platform for the automated processing of cell-based assays
110. Identification of factors influencing insertion characteristics of cochlear implant electrode carriers
111. Characterization of a measurement setup for the thermomechanical characterization of curved shape memory alloy actuators
112. Protective role of vitamin E to reduce oxidative degradation of soft implantable polyurethanes: In vitro study
113. Enhancing the biocompatibility of siliconepolycarbonate urethane based implant materials
114. Characterization of Atrial Septal Defect Occluders by right and left atrial pull-out forces
115. Development of an in vitro test procedure for the characterization of left atrial appendage occluder devices
116. Support function of self-expanding nitinol stents – Are radial resistive force and crush resistance comparable?
117. Non-destructive analysis of drug content in polymer coatings with Raman spectroscopy
118. Influence of leaflet geometry on hydrodynamic performance of transcatheter aortic valve prostheses
119. Numerical simulation of the functionality of a stent structure for venous valve prostheses
120. Actinomycin D for fibrosis management in ophthalmic implant surgery
121. Method for the improvement of mechanical properties of biodegradable polymeric scaffolds
122. Extrusion as a manufacturing process for polymer micro-tubes for various bio-medical applications
123. Pressure sensor emulator to improve longterm stability of heart valve testing systems
124. Numerical investigation of stent designs for wireless access to integrated sensors
125. Development of an experimental setup for the in vitro investigation of mitral valve repair devices
126. Evaluation of Adjustable Loop Suspensory Anterior Cruciate Ligament Fixation Devices
127. Low-turbulence displacement-flow for an operating environment
128. Development of a smart fabric force-sensing glove for physiotherapeutic Applications
129. Endoscopic Pan/Tilt Camera for Thorax Interventions – Design and first results
130. Technical Support of Wound Healing Processes: Project Status
131. Experimental and numerical investigations of a small animal coil for ultra-high field magnetic resonance imaging (7T)
132. Generation of a Simplified Brain Geometry for the Calculation of Local Cerebral Temperature using a 1D Hemodynamic Model
133. Modeling of the Human Cerebral Collateral Circulation: Evaluation of the Impact on the Cerebral Perfusion in Case of Ischemic Stroke
134. Manufacturing process for hydrogel vessel phantoms
135. Numerical simulation and in vitro examination of the flow behaviour within coronary stents
136. A step towards enzyme-free tissue dissociation
137. Model of SpO2 signal of the neonate
138. A new approach to quickly edit geometries and estimate stresses and displacements of implants in real-time
139. Development of a Novel Low-cost Lung Function Simulator
140. Plug-in circuit board for the Raspberry-Pi microcomputer to reproduce multi-channel original electrocardiograms
141. MRI flow measurements with a flexible stenosis phantom
142. Development of a constitutive law for numerical simulation of artificial leaflet-structures for transcatheter heart valve prostheses
143. Biocompatibility of magnetic iron oxide nanoparticles for biomedical applications
144. Optical endovascular imaging combining endoscopy, NBI and OCT, a feasibility study
145. Establishment and initial characterization of a simple 3D wound healing model
146. Investigation of the Inertial Cavitation Activity of Sonosensitive and Biocompatible Nanoparticles for Drug Delivery Applications Employing High Intensity Focused Ultrasound
147. Guiding and Accumulation of Magnetic Nanoparticles Employing High Intensity Focused Ultrasound for Drug Targeting Applications
148. Design and first results of a phantom study on the suitability of iterative reconstruction for lung-cancer screening with low-dose computer tomography
149. Influence of 12-bit and 16-bit CT values of metals on dose calculation in radiotherapy using PRIMO, a Monte Carlo code for clinical linear accelerators
150. Robust motion tracking of deformable targets in the liver using binary feature libraries in 4D ultrasound
151. Comparison of approval procedures for medical devices in Europe and the USA
152. Analysis of regulatory requirements of medical devices and in-vitro diagnostics worldwide for the development of an efficient procedure of registration for manufacturers of medical products
153. Mobile compressed gas supply for active orthoses and exo-skeletons
154. Individual Avatar Feedback Creation for Assisted Motion Control