Home Simulation of segmented mirrors with adaptive optics
Article
Licensed
Unlicensed Requires Authentication

Simulation of segmented mirrors with adaptive optics

  • Johannes Störkle , Luzia Hahn and Peter Eberhard ORCID logo EMAIL logo
Published/Copyright: February 23, 2019
Become an author with De Gruyter Brill

Abstract

This work deals with the simulation-based investigation and control of optical systems that are mechanically influenced. Here, the focus is on the dynamic-optical modeling of vibration-sensitive, segmented mirror systems, which are used, for example, in large astronomic telescopes. Furthermore, an adaptive optical unit usually compensates for the optical aberrations due to atmospheric disturbances. In practice, these aberrations are detected and corrected within a few seconds using deformable mirrors. However, to further improve the performance of these optical systems, dynamic disturbances in the mechanics, i.e. small movements and deformations of the optical surfaces, must also be taken into account. For the investigation of such cases, multidisciplinary simulation methods are developed and presented.

Acknowledgments

The authors thank Alois Herkommer (Institute of Applied Optics, University of Stuttgart) for the invitation to participate in this special issue.

References

[1] H. Ebel, Modellierung eines Shack-Hartmann-Wellenfrontsensors für dynamisch-optische Simulationen. Simtech-Projektarbeit SA-6 (Institut für Technische und Numerische Mechanik, Universität Stuttgart, 2014).Search in Google Scholar

[2] R. Tyson, ‘Principles of Adaptive Optics’, 4th ed. (CRC Press, Boca Raton, 2015).10.1201/b19712Search in Google Scholar

[3] M. Böhm, J.U. Pott, O. Sawodny, T. Herbst and M. Kürster, MNRAS Monthly Notices R. Astronom. Soc. 442, 2446–2455 (2014).10.1093/mnras/stu1012Search in Google Scholar

[4] T. Ruppel, S. Dong, F. Rooms, W. Osten and O. Sawodny, IEEE Trans. Control Syst. Technol. 21, 579–589 (2013).10.1109/TCST.2012.2186813Search in Google Scholar

[5] M. Böhm, J.U. Pott, O. Sawodny, D. Defrére and P. Hinz, IEEE Trans. Control Syst. Technol. 25, 1384–1393 (2016).10.1109/TCST.2016.2601627Search in Google Scholar

[6] J. Störkle and P. Eberhard, in ‘Proc. SPIE, Integrated Modeling of Complex Optomechanical Systems II’ (2016), vol. 10012, pp. 100120C–100120C–5.10.1117/12.2199538Search in Google Scholar

[7] J. Störkle and P. Eberhard, in ‘Proc. SPIE, Modeling, Systems Engineering, and Project Management for Astronomy VI’ (2016), vol. 9911, pp. 99111E–99111E–15.10.1117/12.2230692Search in Google Scholar

[8] J. Störkle, Dynamic simulation and control of optical systems. Dissertation, Schriften aus dem Institut für Technische und Numerische Mechanik der Universität Stuttgart, vol. 58 (Shaker Verlag, Aachen, 2018).Search in Google Scholar

[9] J. Störkle and P. Eberhard, J. Astronom. Telescopes Instrum. Syst. (JATIS) 024001–1–024001–18 (2017).Search in Google Scholar

[10] B. Abraham, S. Adkins, B. Alcott, D. Alvarez, R. Alvarez, et al., Thirty Meter Telescope — construction proposal. Technical Report (TMT Observatory Corporation, 2007).Search in Google Scholar

[11] G. Ming Dai and V.N. Mahajan, J. Opt. Soc. Am. A 24, 139–155 (2007).10.1364/JOSAA.24.000139Search in Google Scholar

[12] J. Nijenhuis, R. Hamelinck and B. Braam, in ‘Proc. SPIE, Modern Technologies in Space- and Ground-Based Telescopes and Instrumentation II’ (2012), vol. 8450, pp. 84500A–84500A-9.Search in Google Scholar

Received: 2018-11-29
Accepted: 2019-01-29
Published Online: 2019-02-23
Published in Print: 2019-04-24

©2019 THOSS Media & De Gruyter, Berlin/Boston

Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/aot-2018-0063/html?lang=en
Scroll to top button