New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol

J. Paciorek-Sadowska,; B. Czupryński,; J. Liszkowska,

doi:10.1515/POLYENG.2010.30.3-4.229

Home New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol

Article

Licensed

Unlicensed Requires Authentication

New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol

J. Paciorek-Sadowska, , B. Czupryński, and J. Liszkowska,

Published/Copyright: August 1, 2010

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Journal of Polymer Engineering Volume 30 Issue 3-4

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Paciorek-Sadowska,, J., Czupryński,, B. and Liszkowska,, J.. "New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol" Journal of Polymer Engineering, vol. 30, no. 3-4, 2010, pp. 229-244. https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Paciorek-Sadowska,, J., Czupryński,, B. & Liszkowska,, J. (2010). New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol. Journal of Polymer Engineering, 30(3-4), 229-244. https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Paciorek-Sadowska,, J., Czupryński,, B. and Liszkowska,, J. (2010) New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol. Journal of Polymer Engineering, Vol. 30 (Issue 3-4), pp. 229-244. https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Paciorek-Sadowska,, J., Czupryński,, B. and Liszkowska,, J.. "New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol" Journal of Polymer Engineering 30, no. 3-4 (2010): 229-244. https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Paciorek-Sadowska, J, Czupryński, B, Liszkowska, J. New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol. Journal of Polymer Engineering. 2010;30(3-4): 229-244. https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2010-08

You are currently not able to access this content.

Articles in the same Issue

CONTENTS
In Memoriam: Professor Tai Hun Kwon, 1952-2010
Electrospinning of Regenerated Silk Fibroin and Polyvinyl Alcohol blended Solution
Comparison of Analytical and Numerical Solutions for Simply Supported Composite Beams under Uniformly Distributed Loads
Classifications of Plastic Polymers based on Spectral Data Analysis with leaser induced Breakdown Spectroscopy
A Study of Warpage and its Mechanism in Sequential Overmolding
Study on Compatibilization of Polyethersulfone/poly (Aryl ether ketone) containing 1,4-Naphthalene blends
New Polyol for Production of Rigid Poliurethane-polyisocyanurate Foams Part 1: Characteristics and Conditions for the New Boroorganic Polyol Preparation
New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol
The Prediction of Film Thickness after Transverse Stretching with a Consideration of Heated Air Flow in a Tenter

Search journal Search the content of this journal

https://doi.org/10.1515/POLYENG.2010.30.3-4.229

Articles in the same Issue

CONTENTS
In Memoriam: Professor Tai Hun Kwon, 1952-2010
Electrospinning of Regenerated Silk Fibroin and Polyvinyl Alcohol blended Solution
Comparison of Analytical and Numerical Solutions for Simply Supported Composite Beams under Uniformly Distributed Loads
Classifications of Plastic Polymers based on Spectral Data Analysis with leaser induced Breakdown Spectroscopy
A Study of Warpage and its Mechanism in Sequential Overmolding
Study on Compatibilization of Polyethersulfone/poly (Aryl ether ketone) containing 1,4-Naphthalene blends
New Polyol for Production of Rigid Poliurethane-polyisocyanurate Foams Part 1: Characteristics and Conditions for the New Boroorganic Polyol Preparation
New Polyol for Production of Rigid Potyurethane-polyisocyanurate Foams Part 2: Preparation of Rigid Polyurethane-polyisocyanurate Foams with the New Polyol
The Prediction of Film Thickness after Transverse Stretching with a Consideration of Heated Air Flow in a Tenter