Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process

M.J. Reig,; V.J. Segui,; J.D. Zamanillo,

doi:10.1515/POLYENG.2005.25.5.435

Home Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process

Article

Licensed

Unlicensed Requires Authentication

Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process

M.J. Reig, , V.J. Segui, and J.D. Zamanillo,

Published/Copyright: August 1, 2005

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Journal of Polymer Engineering Volume 25 Issue 5

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Reig,, M.J., Segui,, V.J. and Zamanillo,, J.D.. "Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process" Journal of Polymer Engineering, vol. 25, no. 5, 2005, pp. 435-457. https://doi.org/10.1515/POLYENG.2005.25.5.435

Reig,, M., Segui,, V. & Zamanillo,, J. (2005). Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process. Journal of Polymer Engineering, 25(5), 435-457. https://doi.org/10.1515/POLYENG.2005.25.5.435

Reig,, M., Segui,, V. and Zamanillo,, J. (2005) Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process. Journal of Polymer Engineering, Vol. 25 (Issue 5), pp. 435-457. https://doi.org/10.1515/POLYENG.2005.25.5.435

Reig,, M.J., Segui,, V.J. and Zamanillo,, J.D.. "Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process" Journal of Polymer Engineering 25, no. 5 (2005): 435-457. https://doi.org/10.1515/POLYENG.2005.25.5.435

Reig, M, Segui, V, Zamanillo, J. Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process. Journal of Polymer Engineering. 2005;25(5): 435-457. https://doi.org/10.1515/POLYENG.2005.25.5.435

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2005-08

You are currently not able to access this content.

Articles in the same Issue

CONTENTS
Morphology and Mechanical Properties of Reactive and Non-Reactive COC/EOC Blends
Multilayer Film Coextrusion of Polymer Melts: Analysis of Industrial Lines with the Finite Element Method
Temperature and Strain Rate Dependent Simulation of High Speed Tensile Tests of I-PP
Stress-Strain Behavior of Polyethylene Terephthalate) (PET) During Large Plastic Deformation by Plane Strain Compression. Part II: The Stress-Strain Temperature (SST) Superposition Principle
Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process

Search journal Search the content of this journal

https://doi.org/10.1515/POLYENG.2005.25.5.435

Articles in the same Issue

CONTENTS
Morphology and Mechanical Properties of Reactive and Non-Reactive COC/EOC Blends
Multilayer Film Coextrusion of Polymer Melts: Analysis of Industrial Lines with the Finite Element Method
Temperature and Strain Rate Dependent Simulation of High Speed Tensile Tests of I-PP
Stress-Strain Behavior of Polyethylene Terephthalate) (PET) During Large Plastic Deformation by Plane Strain Compression. Part II: The Stress-Strain Temperature (SST) Superposition Principle
Rheological Behavior Modeling of Recycled ABS/PC Blends Applied to Injection Molding Process