Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites

G. Baskarana,; S. Gowrib,; R. Krishnamurthy,

doi:10.1515/IJMSP.2009.10.1.33

Home Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites

Article

Licensed

Unlicensed Requires Authentication

Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites

G. Baskarana, , S. Gowrib, and R. Krishnamurthy,

Published/Copyright: March 1, 2009

Published by

Become an author with De Gruyter Brill

Author Information

From the journal Journal for Manufacturing Science and Production Volume 10 Issue 1

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Baskarana,, G., Gowrib,, S. and Krishnamurthy,, R.. "Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites" Journal for Manufacturing Science and Production, vol. 10, no. 1, 2009, pp. 33-42. https://doi.org/10.1515/IJMSP.2009.10.1.33

Baskarana,, G., Gowrib,, S. & Krishnamurthy,, R. (2009). Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites. Journal for Manufacturing Science and Production, 10(1), 33-42. https://doi.org/10.1515/IJMSP.2009.10.1.33

Baskarana,, G., Gowrib,, S. and Krishnamurthy,, R. (2009) Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites. Journal for Manufacturing Science and Production, Vol. 10 (Issue 1), pp. 33-42. https://doi.org/10.1515/IJMSP.2009.10.1.33

Baskarana,, G., Gowrib,, S. and Krishnamurthy,, R.. "Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites" Journal for Manufacturing Science and Production 10, no. 1 (2009): 33-42. https://doi.org/10.1515/IJMSP.2009.10.1.33

Baskarana, G, Gowrib, S, Krishnamurthy, R. Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites. Journal for Manufacturing Science and Production. 2009;10(1): 33-42. https://doi.org/10.1515/IJMSP.2009.10.1.33

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2009-03

You are currently not able to access this content.

Articles in the same Issue

TABLE OF CONTENTS
Review of Tolerance Analysis, Allocation and Constraints in Manufacturing
Failure investigation of Platen Superheater Outlet Header
An Experimental Investigation of Hydro Mechanical Deep Drawing of Super Alloy Cups
Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites
Computational Modeling of a Planar 3-D SOFC and the Effect of Materials Properties On the Anode Performance
Development of Anode Materials for Solid Oxide Fuel Cells -A Review
Cryogenic Grinding of Mild Steel and Stainless steel

Search journal Search the content of this journal

https://doi.org/10.1515/IJMSP.2009.10.1.33

Articles in the same Issue

TABLE OF CONTENTS
Review of Tolerance Analysis, Allocation and Constraints in Manufacturing
Failure investigation of Platen Superheater Outlet Header
An Experimental Investigation of Hydro Mechanical Deep Drawing of Super Alloy Cups
Effect of Fine Blanking on Hole Quality in Glass Fibre Reinforced Plastic Composites
Computational Modeling of a Planar 3-D SOFC and the Effect of Materials Properties On the Anode Performance
Development of Anode Materials for Solid Oxide Fuel Cells -A Review
Cryogenic Grinding of Mild Steel and Stainless steel