Performance of Fully Active Suspension System Using PID Controller

A. Bhaskrara Rao,; M. Senthil Kumar,; S. Vijayarangan,

doi:10.1515/IJMSP.2006.7.3-4.271

Home Performance of Fully Active Suspension System Using PID Controller

Article

Licensed

Unlicensed Requires Authentication

Performance of Fully Active Suspension System Using PID Controller

A. Bhaskrara Rao, , M. Senthil Kumar, and S. Vijayarangan,

Published/Copyright: December 1, 2006

Published by

Become an author with De Gruyter Brill

Author Information

From the journal Journal for Manufacturing Science and Production Volume 7 Issue 3-4

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Rao,, A. Bhaskrara, Kumar,, M. Senthil and Vijayarangan,, S.. "Performance of Fully Active Suspension System Using PID Controller" Journal for Manufacturing Science and Production, vol. 7, no. 3-4, 2006, pp. 271-282. https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Rao,, A., Kumar,, M. & Vijayarangan,, S. (2006). Performance of Fully Active Suspension System Using PID Controller. Journal for Manufacturing Science and Production, 7(3-4), 271-282. https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Rao,, A., Kumar,, M. and Vijayarangan,, S. (2006) Performance of Fully Active Suspension System Using PID Controller. Journal for Manufacturing Science and Production, Vol. 7 (Issue 3-4), pp. 271-282. https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Rao,, A. Bhaskrara, Kumar,, M. Senthil and Vijayarangan,, S.. "Performance of Fully Active Suspension System Using PID Controller" Journal for Manufacturing Science and Production 7, no. 3-4 (2006): 271-282. https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Rao, A, Kumar, M, Vijayarangan, S. Performance of Fully Active Suspension System Using PID Controller. Journal for Manufacturing Science and Production. 2006;7(3-4): 271-282. https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2006-12

You are currently not able to access this content.

Articles in the same Issue

TABLE OF CONTENTS
Cylindrical Cup Drawing with Hydrodynamic Pressure Assisted Blank Holding
Desirability Function Approach for Optimization of Bead Geometry in Submerged Arc Welding Using Factorial Design and Response Surface Methodology
Sensitivity Analysis of Flux Cored Arc Cladding Parameters Using Response Surface Methodology
An Experimental Study on Effect of Drill Points and Drill Wear on Drilling of Glass Fiber Reinforced Plastic at High Spindle Speed
Optimum Cutting Speed for Machining Stainless Steel with Coated Carbide Tools
Cryogenic Treatment Effect on Stress Distribution in Interference Fitted Assemblies
Design and Performance Evaluation of a Supersonic Nozzle used for Laser Cutting of Thick Carbon Steel
Process Parameter Optimization Using Response Surface Methodology for Turning
Reliability Modeling and Analysis of Composite Product System - A Systems Approach
Optimization of Roll Grinding of D2 Steel With Multiple Performance Characteristics Using Taguchi Method with Fuzzy Logics
Performance of Fully Active Suspension System Using PID Controller
Multi-Objective Optimization of Traverse Grinding Operation on D2 Steel Work Rolls Using Evolutionary Algorithm

Search journal Search the content of this journal

https://doi.org/10.1515/IJMSP.2006.7.3-4.271

Articles in the same Issue

TABLE OF CONTENTS
Cylindrical Cup Drawing with Hydrodynamic Pressure Assisted Blank Holding
Desirability Function Approach for Optimization of Bead Geometry in Submerged Arc Welding Using Factorial Design and Response Surface Methodology
Sensitivity Analysis of Flux Cored Arc Cladding Parameters Using Response Surface Methodology
An Experimental Study on Effect of Drill Points and Drill Wear on Drilling of Glass Fiber Reinforced Plastic at High Spindle Speed
Optimum Cutting Speed for Machining Stainless Steel with Coated Carbide Tools
Cryogenic Treatment Effect on Stress Distribution in Interference Fitted Assemblies
Design and Performance Evaluation of a Supersonic Nozzle used for Laser Cutting of Thick Carbon Steel
Process Parameter Optimization Using Response Surface Methodology for Turning
Reliability Modeling and Analysis of Composite Product System - A Systems Approach
Optimization of Roll Grinding of D2 Steel With Multiple Performance Characteristics Using Taguchi Method with Fuzzy Logics
Performance of Fully Active Suspension System Using PID Controller
Multi-Objective Optimization of Traverse Grinding Operation on D2 Steel Work Rolls Using Evolutionary Algorithm