Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite

Bünyamin Sarı,; Gökay Nemli,; Selahattin Bardak,; Mehmet Baharoglu,; Emir Zekoviç,

doi:10.1515/HTMP.2010.29.4.287

Home Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite

Article Open Access

Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite

Bünyamin Sarı, , Gökay Nemli, , Selahattin Bardak, , Mehmet Baharoglu, and Emir Zekoviç,

Published/Copyright: May 6, 2011

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal High Temperature Materials and Processes Volume 29 Issue 4

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Sarı,, Bünyamin, Nemli,, Gökay, Bardak,, Selahattin, Baharoglu,, Mehmet and Zekoviç,, Emir. "Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite" High Temperature Materials and Processes, vol. 29, no. 4, 2010, pp. 287-294. https://doi.org/10.1515/HTMP.2010.29.4.287

Sarı,, B., Nemli,, G., Bardak,, S., Baharoglu,, M. & Zekoviç,, E. (2010). Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite. High Temperature Materials and Processes, 29(4), 287-294. https://doi.org/10.1515/HTMP.2010.29.4.287

Sarı,, B., Nemli,, G., Bardak,, S., Baharoglu,, M. and Zekoviç,, E. (2010) Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite. High Temperature Materials and Processes, Vol. 29 (Issue 4), pp. 287-294. https://doi.org/10.1515/HTMP.2010.29.4.287

Sarı,, Bünyamin, Nemli,, Gökay, Bardak,, Selahattin, Baharoglu,, Mehmet and Zekoviç,, Emir. "Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite" High Temperature Materials and Processes 29, no. 4 (2010): 287-294. https://doi.org/10.1515/HTMP.2010.29.4.287

Sarı, B, Nemli, G, Bardak, S, Baharoglu, M, Zekoviç, E. Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite. High Temperature Materials and Processes. 2010;29(4): 287-294. https://doi.org/10.1515/HTMP.2010.29.4.287

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2011-05-06

Published in Print: 2010-08

Articles in the same Issue

TABLE OF CONTENTS
Strengthening Mechanism of S30432 Austenitic Heat-resistant Steel
The Effects of Steady Magnetic Field on Solidification Microstructure and Distribution of Impurity Elements of Molten Carbon Steel
Analysis of a Heat Exchanger Coil Tube in a Petrochemical Reactor After Fire
Boronizing Effect on the Corrosion Behaviour of Chilled Cast Iron and AISI 1050 Steel
Distinct Photoluminescence Enhancement of Supercritical Water Reacted Tin Dioxide
Temperature Dependence of the Spontaneous Polarization and the Dielectric Susceptibility near the Phase Transitions in Ammonium Sulfate
Thermal and Electrochemical Behaviour of Na/Bentonite- Polyaniline Nanocomposite in Different Media
Microstructural Analysis after Reheat Treatments and Long- Term Heating in Cast Nickel Base Superalloy, GTD-111
Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite
Effect of Si Addition on High Temperature Oxidation of Cu-20Ni-20Cr Alloy
The Effect of Zirconia Addition on Crystallization Behaviour and Machinability of Potassium Mica and Fluorapatite Glass- Ceramics
Laser Surface Alloying of Nickel and Chromium (III) Electroplated Carbon Steel with Nd: YAG Laser

Search journal Search the content of this journal

https://doi.org/10.1515/HTMP.2010.29.4.287

Creative Commons

BY-NC-ND 3.0

Articles in the same Issue

TABLE OF CONTENTS
Strengthening Mechanism of S30432 Austenitic Heat-resistant Steel
The Effects of Steady Magnetic Field on Solidification Microstructure and Distribution of Impurity Elements of Molten Carbon Steel
Analysis of a Heat Exchanger Coil Tube in a Petrochemical Reactor After Fire
Boronizing Effect on the Corrosion Behaviour of Chilled Cast Iron and AISI 1050 Steel
Distinct Photoluminescence Enhancement of Supercritical Water Reacted Tin Dioxide
Temperature Dependence of the Spontaneous Polarization and the Dielectric Susceptibility near the Phase Transitions in Ammonium Sulfate
Thermal and Electrochemical Behaviour of Na/Bentonite- Polyaniline Nanocomposite in Different Media
Microstructural Analysis after Reheat Treatments and Long- Term Heating in Cast Nickel Base Superalloy, GTD-111
Effects of Formaldehyde/Urea Mole Ratio, Panel Density, Shelling Ratio, and Waste Screen Dust on the Physical and Mechanical Properties, and Formaldehyde Emission of Particleboard Composite
Effect of Si Addition on High Temperature Oxidation of Cu-20Ni-20Cr Alloy
The Effect of Zirconia Addition on Crystallization Behaviour and Machinability of Potassium Mica and Fluorapatite Glass- Ceramics
Laser Surface Alloying of Nickel and Chromium (III) Electroplated Carbon Steel with Nd: YAG Laser