Home Assessment of biodeterioration for the screening of new wood preservatives: Calculation of stiffness loss in rapid decay testing
Article
Licensed
Unlicensed Requires Authentication

Assessment of biodeterioration for the screening of new wood preservatives: Calculation of stiffness loss in rapid decay testing

  • Simon R. Przewloka , Douglas M. Crawford , Douglas R. Rammer , Donald L. Buckner , Bessie M. Woodward , Gan Li and Darrel D. Nicholas
Published/Copyright: December 10, 2007
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 62 Issue 3

Abstract

Demand for the development of environmentally benign wood preservatives has increased significantly. To reduce the evaluation time of prospective candidates, reliable accelerated decay methodologies are necessary for laboratory screening of potential preservatives. Ongoing research at Mississippi State University has focused upon utilizing custom built equipment to measure stiffness losses in wood wafers after 4 weeks of fungal exposure as opposed to mass losses in blocks after 12 weeks. Stiffness loss as a measure to quantify the extent of biodeterioration may allow detection of incipient decay. The resistance of untreated and treated southern yellow pine and radiata pine (Pinus radiata) sapwood wafers to biodeterioration by brown rot (Neolentinus lepideus, Gloeophyllum trabeum and Postia placenta) and white rot (Trametes versicolor and Irpex lacteus) fungi was investigated by measuring stiffness. From the data collected percentage stiffness losses were calculated based upon modulus of elasticity. It is a potentially accurate alternative to the “secant modulus” at a deformation equal to 5% of the specimen height calculation generally performed.


Corresponding author. University of Melbourne, School of Forest and Ecosystem Science, Water Street, Creswick, Victoria 3363, Australia

Received: 2007-5-16
Accepted: 2007-10-8
Published Online: 2007-12-10
Published Online: 2007-12-10
Published in Print: 2008-05-01

©2008 by Walter de Gruyter Berlin New York

Articles in the same Issue

  1. Meetings
  2. Original Papers
  3. Topochemical investigation on tension wood fibres of Acer spp., Fagus sylvatica L. and Quercus robur L.
  4. Developing environmentally benign and effective organic wood preservatives by understanding the biocidal and non-biocidal properties of extractives in naturally durable heartwood
  5. Assessment of biodeterioration for the screening of new wood preservatives: Calculation of stiffness loss in rapid decay testing
  6. Degradation of thermo-hygro-mechanically (THM)-densified wood by soft-rot fungi
  7. FT-NIR spectroscopy in predicting the decay resistance related characteristics of solid Scots pine (Pinus sylvestris L.) heartwood
  8. Effects of fixation temperature and environment on copper speciation in ACQ treated red pine
  9. Fixation of copper(II)-protein formulation in wood: Part 1. Influence of tannic acid on fixation of copper in wood
  10. Fixation of copper-protein formulation in wood: Part 2. Molecular mechanism of fixation of copper(II) in cellulose, lignin and wood studied by EPR
  11. 1-Alkoxymethyl-X-dimethylaminopyridinium-base ionic liquids in wood preservation
  12. Short Note
  13. Synthesis and evaluation of phosphortriamidates in wood for thermal and fungal decay protection
  14. Original Papers
  15. 3D magnetic resonance microscopy of a wounded beech branch
  16. Sorption of corn cob and oat spelt arabinoxylan onto softwood kraft pulp
  17. Effects of thermomechanical refining conditions on the morphology and thermal properties of wheat straw fibre
  18. Extractive composition and summative chemical analysis of thermally treated eucalypt wood
  19. Analysis of cell wall swelling on the basis of a cylindrical model
  20. Swelling of larch wood in organic liquids
  21. Determination of the thermal conductivity of wood by the hot plate method: The influence of morphological properties of fir wood (Abies alba Mill.) to the contact thermal resistance
  22. Short Note
  23. Study of the retarding mechanism of citric acid during gypsum particleboard manufacturing
  24. Obituary
  25. William Edwin (Ted) Hillis (1921–2008)
Downloaded on 2.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2008.024/html
Scroll to top button