Home Influence of amide content on the crystal structure of chitin
Article
Licensed
Unlicensed Requires Authentication

Influence of amide content on the crystal structure of chitin

  • Hiroshi Tamura , Makoto Sawada , Hideaki Nagahama , Taiichi Higuchi and Seiichi Tokura
Published/Copyright: August 16, 2006
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 60 Issue 5

Abstract

The crystalline structure of chitin and chitosan was investigated by X-ray diffraction (XRD). Chitosan filaments were prepared using a saturated solution of calcium chloride dihydrate in methanol (CaCl2-MeOH) as a mild solvent and the study focused on the interaction between the degree of acetylation (DA) and crystallinity. There were pronounced differences in the XRD patterns for specimens with DA values between 44.2% and 52.2%. We suggest that the crystalline structure changes from an anhydrous-type chitosan to an α-chitin type without any additives. CaCl2-MeOH is a good solvent for chitin and a poor solvent for chitosan and we found that it can regulate the distribution of N-acetyl glucosamine and glucosamine between amorphous and crystalline regions.

:

Corresponding author. Faculty of Engineering and High Technology Research Center, Kansai University, Suita, Osaka, 564-8680, Japan

References

Austin, P.R. (1975) Purification of chitin. U.S. Patent, 3 879 377.Search in Google Scholar

Capozza, R.C. (1976) Spinning and shaping poly-(N-acetyl-d-glucosamine). U.S. Patent 3 988 411.Search in Google Scholar

Hirano, S. (2002) Functional biofibers based on chitin and chitosan. Bioindustry19:62–70.Search in Google Scholar

Hirano, S., Ohe, Y., Ono, H. (1976) Selective N-acylation of chitosan. Carbohyd. Res.47:315–320.10.1016/S0008-6215(00)84198-1Search in Google Scholar

Kaifu, K., Nishi, N., Tokura, S. (1981) Studies on chitin V. Formylation, propionylation, and butylation of chitin. Polym. J.13:241–245.Search in Google Scholar

Miya, M., Iwamoto, R., Ohta, K., Mima, S. (1986) Determination of molecular weight changes of chitosan in solution and film by the GPC/LALLS [gel permeation chromatography/low-angle laser light scattering] method. Kobunshironbunshu43:83–89.Search in Google Scholar

Okuyama, K., Noguchi, K., Hanafusa, Y., Osawa, K., Ogawa, K. (1999) Structural study of anhydrous tendon chitosan obtained via chitosan/acetic acid complex. Int. J. Biol. Macromol.26:285–293.10.1016/S0141-8130(99)00095-1Search in Google Scholar

Sannan, T., Kurita, K., Ogura, K., Iwakura, Y. (1978) Studies on chitin 7. Infrared spectroscopic determination of degree of deacetylation. Polymer19:458–459.Search in Google Scholar

Schupp, O.E. (1944) Polymeric composition. U.S. Patent 2 359 877.Search in Google Scholar

Shirai, A., Takahashi, K., Rujiravanit, R., Nishi, N., Tokura, S. (1995) Regeneration of chitin using new solvent system. In: Chitin and Chitosan. Eds. Zakaria, B.B., Muda, W.M.W., Abdullah, M.P. Bangi, Penerbit Universiti, Kebangsaan Malaysia. pp. 53–60.Search in Google Scholar

Tamura, H., Tokura, S. (2002) Preparation of chitosan coated alginate filament. Mater. Sci. Eng. C20:143–147.10.1016/S0928-4931(02)00024-3Search in Google Scholar

Tokura, S., Nishi, N., Noguchi, J. (1979) Studies on chitin III. Preparation of chitin fibers. Polym. J.11:781–786.Search in Google Scholar

Published Online: 2006-08-16
Published in Print: 2006-08-01

©2006 by Walter de Gruyter Berlin New York

Articles in the same Issue

  1. A report from the 2005 Japanese-European Workshop on “Cellulose and Functional Polysaccharides”
  2. Determination of substituent distribution of viscoses by GPC
  3. Direct investigation of the structural properties of tension wood cellulose microfibrils using microbeam X-ray fibre diffraction
  4. Influence of amide content on the crystal structure of chitin
  5. Stepwise synthesis of chitooligosaccharides through a transition-state analogue substrate catalyzed by mutants of chitinase A1 from Bacillus circulans WL-12
  6. Synthesis of plantamajoside, a bioactive dihydroxyphenylethyl glycoside from Plantago major L.
  7. Diffusion of sulfide into Southern pine (Pinus taeda L.) and sweetgum (Liquidambar styraciflua L.) particles and chips
  8. Laccase-catalysed functionalisation of TMP with tyramine
  9. Wood liquefaction by ionic liquids
  10. Studies on the dehydrogenative polymerizations of monolignol β-glycosides. Part 2: Horseradish peroxidase-catalyzed dehydrogenative polymerization of isoconiferin
  11. Phenolic compounds in silver birch (Betula pendula Roth) wood
  12. Analysis of fragrance compositions of precious coniferous woods grown in Taiwan
  13. Influences of hot pressing temperature and surface structure on VOC emissions from OSB made of Scots pine
  14. Dimensional stability and photostability of octanoylated wood
  15. Measurement of the shear modulus of wood by the square-plate twist method
  16. Dielectric relaxation of water adsorbed on chemically treated woods
  17. Influences of drying on internal checking of spruce (Picea abies L.) heat-treated at 212°C
  18. The role of resol fortifiers in latex wood adhesives
  19. A simple anisotropy correction procedure for acoustic wood tomography
  20. Evaluating growth strain of Eucalyptus globulus Labill. from SilviScan measurements
  21. Density assessment of radiata pine: Sampling strategy revisited
Downloaded on 2.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2006.079/pdf?lang=en
Scroll to top button