Calculation of the relative bonded area and scattering coefficient from sheet density and fibre shape
-
Warren J. Batchelor
Abstract
The fraction of the available fibre surface in a sheet that is bonded to other fibres is the relative bonded area (RBA), which is an important determinant of sheet mechanical properties. The main method for estimating RBA has been to extrapolate data for the light scattering coefficient as a function of tensile strength to zero tensile strength. This method can produce significant errors. In this paper, the light scattering coefficient, corrected for the total surface area of the fibres available for scattering, was plotted against sheet density, corrected for fibre shape. This was carried out for sheets made from several series of pulps, including single furnishes of long- and short-fibre bleached and unbleached pulps, as well as sheets made of blends of bleached long- and short-fibre pulps. The corrected scattering coefficient was inversely linearly correlated to the corrected density for each data set. A theory was developed to allow RBA calculation from the intercept and slope of the fitted line.
References
Batchelor, W.J., He, J. (2005) A new method for determining the relative bonded area. Tappi J.4:23–28.Search in Google Scholar
Bawden, A.D., Kibblewhite, R.P. (1997) Effects of multiple drying treatments on kraft fibre walls. J. Pulp Pap. Sci.23:J340–J346.Search in Google Scholar
Brunauer, S., Emmett, P.H., Teller, E. (1938) Adsorption of gases in multimolecular layers. J. Am. Chem. Soc.60:309–319.10.1021/ja01269a023Search in Google Scholar
El-Hosseiny, D.H., Abson, D. (1979) Light scattering and sheet density. Tappi62:127–129.Search in Google Scholar
He, J., Batchelor, W.J., Johnston, R. (2003a) The behaviour of fibers in wet pressing. Tappi J.2:27–31.Search in Google Scholar
He, J., Batchelor, W.J., Johnston, R.E. (2003b) An analytical model for number of fibre-fibre contacts in paper and expressions for relative bonded area (RBA). In: Proceedings of the 2003 International Paper Physics Conference, Victoria, Canada. Paptac. pp. 77–83.Search in Google Scholar
He, J., Batchelor, W.J., Markowski, R., Johnston, R.E. (2003c) A new approach for quantitative analysis of paper structure at the fibre level. Appita J.56:366–370.Search in Google Scholar
Ingmanson, W.L., Thode, E.F. (1959) Factors contributing to the strength of a sheet of paper. Tappi42:83–93.Search in Google Scholar
Iribarne, J., Schroeder, L.R. (2000) The use of fundamental fiber properties to study pulp strength. In: Progress in Paper Physics – A Seminar, Grenoble, France, Vol. 2. EFPG Ecole Francaise de Papeterie et des Industries Graphiques. pp. 39–56.Search in Google Scholar
Kibblewhite, R.P. (1993) Effects of refined softwood:eucalypt pulp mixtures on paper properties. In: Products of Papermaking: Transactions of the 10th Fundamental Research Symposium. Ed. Baker, C.F. PIRA International, Leatherhead, UK. pp. 127–157.Search in Google Scholar
Kibblewhite, R.P., Bailey, D.G. (1988) Measurement of fibre cross-section dimensions using image processing. Appita J.41:297–303.Search in Google Scholar
Mansfield, S.D., Kibblewhite, R.P., Riddell, M.J.C. (2004) Characterization of the reinforcement potential of different softwood kraft fibers in softwood/hardwood pulp mixtures. Wood Fiber Sci.36:344–358.Search in Google Scholar
Niskanen, K. Paper Physics. Fapet Oy, Helsinki, 1998.Search in Google Scholar
Paavilainen, L. (1993) Importance of cross-dimensional fibre properties and coarseness for the characterisation of softwood sulphate pulp. Pap. Puu75:343–351.Search in Google Scholar
Riddell, M.J.C., Kibblewhite, R.P., Shelbourne, C.J.A. (2005) Clonal variation in wood, chemical, and kraft fibre and hand-sheet properties of slabwood and toplogs in 27-year-old radiata pine. Appita J.58:149–155.Search in Google Scholar
Seth, R.S. (1990a) Fibre quality factors in papermaking I. The importance of fibre length and strength. In: Materials Interactions Relevant to the Pulp, Paper, and Wood Industries. Eds. Caulfield, D.F., Passaretti, J.D., Sobczynski, S.F. Materials Research Society, San Francisco, CA. pp. 125–141.10.1557/PROC-197-125Search in Google Scholar
Seth, R.S. (1990b) Fibre quality factors in papermaking II. The importance of fibre coarseness. In: Materials Interactions Relevant to the Pulp, Paper, and Wood Industries. Eds. Caulfield, D.F., Passaretti, J.D., Sobczynski, S.F. Materials Research Society, San Francisco, CA. pp. 143–161.10.1557/PROC-197-143Search in Google Scholar
Swanson, J.W., Steber, A.J. (1959) Fiber surface area and bonded area. Tappi42:989–994.Search in Google Scholar
©2006 by Walter de Gruyter Berlin New York
Articles in the same Issue
- Brightness stabilisation of bleached high-yield pulps by novel sulfur-containing inhibitors
- Application of UV-Vis and resonance Raman spectroscopy to study bleaching and photoyellowing of thermomechanical pulps
- Characteristics of NAEM salt-catalyzed alcohol organosolv pulping as a biorefinery
- Effect of poly(ethylene oxide) molecular mass on miscibility and hydrogen bonding with lignin
- Calculation of the relative bonded area and scattering coefficient from sheet density and fibre shape
- Formic and acetic acids in archaeological wood. A comparison between the Vasa Warship, the Bremen Cog, the Oberländer Boat and the Danish Viking Ships
- Time-domain 1H NMR characterization of the liquid phase in greenwood
- Chemical reaction of alkoxysilane molecules in wood modified with silanol groups
- Dimensional stability of MDF panels produced from heat-treated fibres
- Multivariate modeling of MDF panel properties in relation to wood fiber characteristics
- Viscoelastic behaviour of solid wood under compressive loading
- The creep of wood destabilized by change in moisture content. Part 3: The influence of changing moisture history on creep behavior
- Air permeability of aspen veneer and glueline: Experimentation and implications
- Fracture cleavage analysis of PVAc latex adhesives: Influence of phenolic additives
- Effect of a waterproof agent on gypsum particleboard properties
- Effects of semi-isostatic densification on anatomy and cell-shape recovery on soaking
- Analytical tools to predict changes in properties of oriented strandboard exposed to the fungus Postia placenta
- The effect of CaCl2 on growth rate, wood decay and oxalic acid accumulation in Serpula lacrymans and related brown-rot fungi
Articles in the same Issue
- Brightness stabilisation of bleached high-yield pulps by novel sulfur-containing inhibitors
- Application of UV-Vis and resonance Raman spectroscopy to study bleaching and photoyellowing of thermomechanical pulps
- Characteristics of NAEM salt-catalyzed alcohol organosolv pulping as a biorefinery
- Effect of poly(ethylene oxide) molecular mass on miscibility and hydrogen bonding with lignin
- Calculation of the relative bonded area and scattering coefficient from sheet density and fibre shape
- Formic and acetic acids in archaeological wood. A comparison between the Vasa Warship, the Bremen Cog, the Oberländer Boat and the Danish Viking Ships
- Time-domain 1H NMR characterization of the liquid phase in greenwood
- Chemical reaction of alkoxysilane molecules in wood modified with silanol groups
- Dimensional stability of MDF panels produced from heat-treated fibres
- Multivariate modeling of MDF panel properties in relation to wood fiber characteristics
- Viscoelastic behaviour of solid wood under compressive loading
- The creep of wood destabilized by change in moisture content. Part 3: The influence of changing moisture history on creep behavior
- Air permeability of aspen veneer and glueline: Experimentation and implications
- Fracture cleavage analysis of PVAc latex adhesives: Influence of phenolic additives
- Effect of a waterproof agent on gypsum particleboard properties
- Effects of semi-isostatic densification on anatomy and cell-shape recovery on soaking
- Analytical tools to predict changes in properties of oriented strandboard exposed to the fungus Postia placenta
- The effect of CaCl2 on growth rate, wood decay and oxalic acid accumulation in Serpula lacrymans and related brown-rot fungi
