Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical characterisation
-
Ingo Burgert
Abstract
Microtensile investigations were carried out on chemically and mechanically isolated fibres that had similar dimensions before isolation. The properties calculated for the fibres were nearly identical for the two isolation methods. However, cell wall cross-sections of chemically isolated fibres shrank much more transversely than those of the mechanically isolated fibres.
References
Burgert, I., Keckes, J., Frühmann, K., Fratzl P., Tschegg, S.E. (2002) A comparison of two techniques for wood fiber isolation – evaluation by tensile tests on single fibres with different microfibril angle. Plant Biol.4:9–12.10.1055/s-2002-20430Suche in Google Scholar
Burgert, I., Frühmann, K., Keckes, J., Fratzl, P., Tschegg, S.E. (2003) Microtensile testing of wood fibers combined with video extensometry for efficient strain detection. Holzforschung57:661–664.10.1515/HF.2003.099Suche in Google Scholar
Burgert I., Gierlinger, N., Zimmermann, T. (2005a) Properties of chemically and mechanically isolated fibres of spruce (Picea abies[L.] Karst.). Part. 1: structural and chemical characterization. Holzforschung, in press.10.1515/HF.2005.038Suche in Google Scholar
Burgert I., Frühmann, K., Keckes, J., Fratzl, P., Tschegg, S.E. (2005b) Properties of chemically and mechanically isolated fibres of spruce (Picea abies[L.] Karst.). Part 2: twisting phenomena. Holzforschung, in press.10.1515/HF.2005.039Suche in Google Scholar
Ehrnrooth, E.M.L., Kolseth, P. (1984) The tensile testing of single wood pulp fibers in air and in water. Wood Fiber Sci.16:549–566.Suche in Google Scholar
Groom, L., Mott, L., Shaler, S.M. (2002a) Mechanical properties of individual southern pine fibers. Part I. Determination and variability of stress-strain curves with respect to tree height and juvenility. Wood Fiber Sci.34:14–27.Suche in Google Scholar
Groom, L., Shaler, S., Mott, L. (2002b) Mechanical properties of individual southern pine fibers. Part III. Global relationships between fiber properties and fiber location within an individual tree. Wood Fiber Sci.34:238–250.Suche in Google Scholar
Jayne, B.A. (1959) Mechanical properties of wood fibers. Tappi42:461–467.Suche in Google Scholar
Jayne, B.A. (1960) Some mechanical properties of wood fibers in tension. For. Prod. J.10:316–322.Suche in Google Scholar
Jentzen, C.A. (1964) The effect of stress applied during drying on some of the properties of individual pulp fibers. Tappi4:412–418.Suche in Google Scholar
Mott, L., Groom, L., Shaler, S. (2002) Mechanical properties of individual southern pine fibers. Part II. Comparison of earlywood and latewood fibres with respect to tree height and juvenility. Wood Fiber Sci.34:221–237.Suche in Google Scholar
Page, D.H., El-Hosseiny, F. (1983) The mechanical properties of single wood pulp fibres. Part VI. Fibril angle and the shape of the stress-strain curve. J. Pulp Pap. Sci.9:1–2.Suche in Google Scholar
Sedighi-Gilani, M., Navi, P. (2004) Influence of local variation of microfibril angle on tensile behaviour of individual wood fibers. In: Proceedings of the 2nd International Symposium on Wood Machining. Eds. Stanzl-Tschegg, S.E., Gindl, M., Sinn, G. Boku, Vienna. pp. 27–35.Suche in Google Scholar
Spiegelberg, H.L. (1966) The effect of hemicelluloses on the mechanical properties of individual pulp fibers. Tappi49:388–396.Suche in Google Scholar
© by Walter de Gruyter Berlin New York
Artikel in diesem Heft
- Molecular dynamics study of lignin constituents in water
- Oxidative cellulose degradation by cellobiose dehydrogenase from Phanerochaete chrysosporium: A model compound study
- Characterization of active oxygen species under oxygen-alkali bleaching conditions
- Erythro/threo ratio of β-O-4-5 structures as an important structural characteristic of lignin. Part 4: Variation in the erythro/threo ratio in softwood and hardwood lignins and its relation to syringyl/guaiacyl ratio
- Stereoisomers of 3,3′-dimethoxy-4,4′-stilbenequinone
- Liquefaction of CCA-treated wood and elimination of metals from the solvent by precipitation
- Condensed tannins from steamed Acacia mearnsii bark
- Chemical composition and antifungal activity of essential oil isolated from Chamaecyparis formosensis Matsum. wood
- Direct measurement of strain distribution along a wood bond line. Part 1: Shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry
- Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution
- Rate-independent mechanical behavior of biaxially stressed wood: Experimental observations and constitutive modeling as an orthotropic two-surface elasto-plastic material
- Characterization of sugar maple wood-polymer composites: Monomer retention and polymer retention
- New insights into wood and cement interaction
- Wood-water sorption isotherm prediction with artificial neural networks: A preliminary study
- Hygroscopicity of resorcinol-formaldehyde resin and aqueous vinyl polymer-isocyanate resin in high humidity
- Modelling anisotropic maturation strains in wood in relation to fibre boundary conditions, microstructure and maturation kinetics
- Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical characterisation
- Resistance of thermo-hygro-mechanically densified wood to colonisation and degradation by brown-rot fungi
- Microbial colonizers of freshly sawn yellow-poplar (Liriodendron tulipifera L.) lumber in two seasons. Part 3: Yeasts
- Efficacy of a copper(II)/oxine copper wood preservative mixture after 69 months of outdoor ground-contact exposure and a proposed mechanism to explain the observed synergism
- Differentiation of indoor wood decay fungi with MALDI-TOF mass spectrometry
- Horst H. Nimz celebrates his 75th birthday on April, 21st, 2005
- Erratum
Artikel in diesem Heft
- Molecular dynamics study of lignin constituents in water
- Oxidative cellulose degradation by cellobiose dehydrogenase from Phanerochaete chrysosporium: A model compound study
- Characterization of active oxygen species under oxygen-alkali bleaching conditions
- Erythro/threo ratio of β-O-4-5 structures as an important structural characteristic of lignin. Part 4: Variation in the erythro/threo ratio in softwood and hardwood lignins and its relation to syringyl/guaiacyl ratio
- Stereoisomers of 3,3′-dimethoxy-4,4′-stilbenequinone
- Liquefaction of CCA-treated wood and elimination of metals from the solvent by precipitation
- Condensed tannins from steamed Acacia mearnsii bark
- Chemical composition and antifungal activity of essential oil isolated from Chamaecyparis formosensis Matsum. wood
- Direct measurement of strain distribution along a wood bond line. Part 1: Shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry
- Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution
- Rate-independent mechanical behavior of biaxially stressed wood: Experimental observations and constitutive modeling as an orthotropic two-surface elasto-plastic material
- Characterization of sugar maple wood-polymer composites: Monomer retention and polymer retention
- New insights into wood and cement interaction
- Wood-water sorption isotherm prediction with artificial neural networks: A preliminary study
- Hygroscopicity of resorcinol-formaldehyde resin and aqueous vinyl polymer-isocyanate resin in high humidity
- Modelling anisotropic maturation strains in wood in relation to fibre boundary conditions, microstructure and maturation kinetics
- Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical characterisation
- Resistance of thermo-hygro-mechanically densified wood to colonisation and degradation by brown-rot fungi
- Microbial colonizers of freshly sawn yellow-poplar (Liriodendron tulipifera L.) lumber in two seasons. Part 3: Yeasts
- Efficacy of a copper(II)/oxine copper wood preservative mixture after 69 months of outdoor ground-contact exposure and a proposed mechanism to explain the observed synergism
- Differentiation of indoor wood decay fungi with MALDI-TOF mass spectrometry
- Horst H. Nimz celebrates his 75th birthday on April, 21st, 2005
- Erratum
