Wettability changes and mass loss during heat treatment of wood

Articles in the same Issue

1. Effect of juvenile wood on strength properties and dimensional stability of black spruce medium-density fiberboard panels
2. Hot-pressing stress graded aspen veneer for laminated veneer lumber (LVL)
3. Internal stresses in glulam due to moisture gradients in the grain direction
4. Influence of grain direction in vibrational wood welding
5. Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition
6. Wettability changes and mass loss during heat treatment of wood
7. Inverse analysis of the transient bound water diffusion in wood
8. The creep of wood destabilized by change in moisture content. Part 2: The creep behaviors of wood during and immediately after adsorption
9. On some physical properties of six aspen clones
10. Changes in color and structure of birch wood (Betula pendula) caused by bleaching with hydrogen peroxide solution
11. Enhanced wet tensile paper properties via dielectric-barrier discharge
12. Survival of bacteria on wood and plastic particles: Dependence on wood species and environmental conditions
13. Microdistribution of copper in copper-ethanolamine (Cu-EA) treated southern yellow pine (Pinus spp.) related to density distribution
14. Investigations on ribosomal DNA of indoor wood decay fungi for their characterization and identification
15. Bioactive phenolic substances in important tree species. Part 3: Knots and stemwood of Acacia crassicarpa and A. mangium
16. Cellulose microfibrils: A novel method of preparation using high shear refining and cryocrushing