Home Internal stresses in the cross-grain direction in glulam induced by climate variations
Article
Licensed
Unlicensed Requires Authentication

Internal stresses in the cross-grain direction in glulam induced by climate variations

  • J. Jönsson
Published/Copyright: June 1, 2005
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 58 Issue 2

Abstract

Results are presented from an experimental investigation to determine internal stress states perpendicular to grain in glulam induced by moisture variations. The stresses are determined by measuring the released strains before and after cutting. Stress distributions are determined for specimens seasoned in constant humidity, specimens exposed to an artificial single climate change, specimens exposed to cyclic climate change and for specimens exposed to natural climate outdoors under shelter. Results for seasoned specimens show that internal stresses exist in glulam without the presence of moisture gradients. Stresses in specimens with an induced moisture gradient become larger when moistening from a specific climate A to another climate B than when drying from B to A. Tests in an outdoor sheltered climate show large variations in strains and stresses. The tensile stress level in the inner part of the glulam cross section exceeds the characteristic strength of 0.5 MPa during a period of approximately 80 days.

:
Published Online: 2005-06-01
Published in Print: 2004-03-15

Copyright © 2004 by Walter de Gruyter GmbH & Co. KG

Articles in the same Issue

  1. Variation in content and composition of lignin in young wood of Norway spruce
  2. Polyoxometalate oxidation of non-phenolic lignin subunits in water: Effect of substrate structure on reaction kinetics
  3. Organosolv pulping of olive tree trimmings by use of ethylene glycol/soda/water mixtures
  4. Cooperativity analysis of the in situ lignin glass transition
  5. Fitting parameters for softening of wet wood under quasi static loading
  6. Measurement of moisture content profiles during drying of Scots pine using magnetic resonance imaging
  7. Influence of temperature on the modulus of elasticity (MOE) of Pinus sylvestris L.
  8. A contact free measurement method to determine internal stress states in glulam
  9. Internal stresses in the cross-grain direction in glulam induced by climate variations
  10. Variation in microfibril angle in Eucalyptus clones
  11. Durability of untreated Norway spruce (Picea abies) exposed outdoors above ground for nine years
  12. Microbial colonizers of freshly sawn yellow-poplar (Liriodendron tulipifera L.) lumber in two seasons: Part 1. Fungi
  13. Microbial colonizers of freshly sawn yellow-poplar (Liriodendron tulipifera L.) lumber in two seasons: Part 2. Bacteria
  14. Antifungal activity of constituents from the heartwood of Gmelina arborea: Part 1. Sensitive antifungal assay against Basidiomycetes
  15. Identification of volatile organic compounds (VOCs) from bacteria and yeast causing growth inhibition of sapstain fungi
  16. Identification of Serpula lacrymans and other decay fungi in construction timber by sequencing of ribosomal DNA – A practical approach
  17. Wood/plastic ratio: Effect on performance of borate biocides against a brown rot fungus
  18. Book Review
  19. Personalia
Downloaded on 2.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2004.023/pdf
Scroll to top button