Home Effects of Chemical Modification Reagents on Acoustic Properties of Wood
Article
Licensed
Unlicensed Requires Authentication

Effects of Chemical Modification Reagents on Acoustic Properties of Wood

  • S.-T. Chang , H.-T. Chang , Y.-S. Huang and F.-L. Hsu
Published/Copyright: June 1, 2005
Become an author with De Gruyter Brill
Holzforschung
From the journal Volume 54 Issue 6

Summary

The acoustic properties of several chemically modified Sitka spruce samples (Picea sitchensis Carr.) were evaluated in the longitudinal direction of wood specimens. Sitka spruce treated with glyoxal and carboxymethyl cellulose (CMC) displayed superior acoustic properties to those obtained by the other treatments. The acoustic converting efficiency (ACE) of the glyoxal-CMC treated Sitka spruce was 1.84 times of that of the untreated specimen and the specific dynamic Young's modulus (E′/r) was retained without decrement after such treatment. Changes in the tanδ of Sitka spruce treated with glyoxal and different concentrations of 1,4-butanediol were opposite. With a low concentration of 1,4-butanediol (10%), the tanδ of the treated specimen decreased as a result of the formation of crosslinked cyclic structures. The potential presence of more alkyl hydroxyl groups in the Sitka spruce, after being treated with glyoxal and a high concentration of 1,4-butanediol (20%), resulted in the increment of tanδ and the decrement of ACE. The impairment of the acoustic properties of Sitka spruce was caused by the introduction of free chains with endwise carboxylic acid groups into cell walls after the succinic anhydride treatment. Slight improvement on the ACE of Sitka spruce was achieved by the reaction with acetic anhydride and the decrease in the tanδ was about 15%, which was attributed to the partial formation of crosslinked matrix. These results revealed the improvement of the acoustic properties of chemically modified wood that was probably achieved only by the formation of network structures between wood components and reagents.

:
Published Online: 2005-06-01
Published in Print: 2000-10-25

Copyright © 2000 by Walter de Gruyter GmbH & Co. KG

Articles in the same Issue

  1. Species Index
  2. Author Index
  3. Contents
  4. Subject Index
  5. Yeast and Bacteria as Biological Control Agents Against Fungal Discolouration of Pinus sylvestris Blocks in Laboratory-Based Tests and the Role of Antifungal Volatiles
  6. Copper Accumulation in the Digestive Caecae of Limnoria quadripunctata Holthius (Isopoda: Crustacea) Tunnelling CCA-Treated Wood in Laboratory Cultures
  7. Chromated Copper Arsenate Preservative Treatment of North American Hardwoods. Part 1. CCA Fixation Performance
  8. Medium Density Fibreboard Manufactured from Blends of White Cypress Pine and Non-Durable Wood Species Shows Increased Resistance to Attack by the Subterranean Termite C. lacteus
  9. Role of a Labile Terpene Compound in the Assessment of the Age of a Fossil Wood from Siena (Tuscany, Italy)
  10. Neolignan Skeletons and Benzodioxanes Through Chiral Aryl Alkyl Ether Formation
  11. Use of β-13 C labelled Coniferyl Alcohol to Detect "End-Wise" Polymerization in the Formation of DHPs
  12. Bleachability of Alkaline Pulps. Part 1. The Importance of β-Aryl Ether Linkages in Lignin
  13. Solid State NMR Studies on Cellulose Crystallinity in Fines and Bulk Fibres Separated from Refined Kraft Pulp
  14. Pulping of Whole Jute Plant (Corchorus capsularies) by Soda-Amine Liquor
  15. Pattern of Alkali Impregnation of Poplar Wood at Moderate Conditions
  16. Structure and Reactivity of Lignins and Associated Phenolic Acids in Wheat Straw TMP and CTMP Pulps
  17. Thermal Reactions of N-Methyl-morpholine-N-oxide (NMMO): A General Method for Separation and Quantification of N-Methyl-morpholine-N-oxide and its Main Degradation Products N-Methylmorpholine and Morpholine by Capillary Electrophoresis (CE)
  18. The Kismet of Residual During LMS Delignification of High-Kappa Kraft Pulps
  19. Variations in Transverse Fibre Wall Properties: Relations Between Elastic Properties and Structure
  20. Application of the GAB Sorption Isotherm Model to Klinki Pine (Araucaria klinkii Lauterb.)
  21. Strain Changes on the Inner Bark Surface of an Inclined Coniferous Sapling Producing Compression Wood
  22. Effects of Chemical Modification Reagents on Acoustic Properties of Wood
  23. J.L. McCarthy In Memoriam
  24. Acknowledgement
Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2000.113/html
Scroll to top button