Startseite Bleachability of Alkaline Pulps. Part 1. The Importance of β-Aryl Ether Linkages in Lignin
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Bleachability of Alkaline Pulps. Part 1. The Importance of β-Aryl Ether Linkages in Lignin

  • G. Gellerstedt und W. Wafa Al-Dajani
Veröffentlicht/Copyright: 1. Juni 2005
Veröffentlichen auch Sie bei De Gruyter Brill
Holzforschung
Aus der Zeitschrift Band 54 Heft 6

Summary

Analytical and structural studies were done on different types of alkaline pulps and their isolated residual lignins. Although having the same degree of delignification after cooking, some pulps were easier to bleach than others. All isolated residual lignins were found to contain β-aryl ether (β-O-4) structures in reasonable amounts when analysed by thioacidolysis (≥10 % of the native lignin value). At decreasing kappa numbers, there was also a corresponding decrease in the amount of β-aryl ether structures in the residual lignin. Moreover, a high β-aryl ether content in the unbleached residual lignin after cooking was found to contribute to a better bleachability of the pulp, especially when hydrogen peroxide stages were involved. At the same degree of delignification, the superior bleachability of alkaline sulfite pulps over kraft pulps was shown to be attributable to a higher content of β-aryl ether linkages in the former type of pulps.

:
Published Online: 2005-06-01
Published in Print: 2000-10-25

Copyright © 2000 by Walter de Gruyter GmbH & Co. KG

Artikel in diesem Heft

  1. Species Index
  2. Author Index
  3. Contents
  4. Subject Index
  5. Yeast and Bacteria as Biological Control Agents Against Fungal Discolouration of Pinus sylvestris Blocks in Laboratory-Based Tests and the Role of Antifungal Volatiles
  6. Copper Accumulation in the Digestive Caecae of Limnoria quadripunctata Holthius (Isopoda: Crustacea) Tunnelling CCA-Treated Wood in Laboratory Cultures
  7. Chromated Copper Arsenate Preservative Treatment of North American Hardwoods. Part 1. CCA Fixation Performance
  8. Medium Density Fibreboard Manufactured from Blends of White Cypress Pine and Non-Durable Wood Species Shows Increased Resistance to Attack by the Subterranean Termite C. lacteus
  9. Role of a Labile Terpene Compound in the Assessment of the Age of a Fossil Wood from Siena (Tuscany, Italy)
  10. Neolignan Skeletons and Benzodioxanes Through Chiral Aryl Alkyl Ether Formation
  11. Use of β-13 C labelled Coniferyl Alcohol to Detect "End-Wise" Polymerization in the Formation of DHPs
  12. Bleachability of Alkaline Pulps. Part 1. The Importance of β-Aryl Ether Linkages in Lignin
  13. Solid State NMR Studies on Cellulose Crystallinity in Fines and Bulk Fibres Separated from Refined Kraft Pulp
  14. Pulping of Whole Jute Plant (Corchorus capsularies) by Soda-Amine Liquor
  15. Pattern of Alkali Impregnation of Poplar Wood at Moderate Conditions
  16. Structure and Reactivity of Lignins and Associated Phenolic Acids in Wheat Straw TMP and CTMP Pulps
  17. Thermal Reactions of N-Methyl-morpholine-N-oxide (NMMO): A General Method for Separation and Quantification of N-Methyl-morpholine-N-oxide and its Main Degradation Products N-Methylmorpholine and Morpholine by Capillary Electrophoresis (CE)
  18. The Kismet of Residual During LMS Delignification of High-Kappa Kraft Pulps
  19. Variations in Transverse Fibre Wall Properties: Relations Between Elastic Properties and Structure
  20. Application of the GAB Sorption Isotherm Model to Klinki Pine (Araucaria klinkii Lauterb.)
  21. Strain Changes on the Inner Bark Surface of an Inclined Coniferous Sapling Producing Compression Wood
  22. Effects of Chemical Modification Reagents on Acoustic Properties of Wood
  23. J.L. McCarthy In Memoriam
  24. Acknowledgement
Heruntergeladen am 2.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/HF.2000.103/pdf?lang=de
Button zum nach oben scrollen