Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process
-
Osiris Turnes
Veröffentlicht/Copyright:
11. März 2010
Abstract
This paper compares semi-economic 
-control charts and -R control charts assuming two different discrete distributions for the length of the in-control period of a production process with regeneration points given by the alarms signals. Sample sizes and control limits for a set of parameters are calculated for both models. For comparison purposes, values of average cost and of probabilities of Type I and II errors are also computed and displayed.
Published Online: 2010-03-11
Published in Print: 2002-April
© Heldermann Verlag
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Optimal Minimal Maintenance of Multistage Degraded System with Repairs
- Performability of Two Modules in Series
- Process Targeting for Optimal Capability when the Product is Subject to Degradation
- Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals
- A Process Control Plan with Two-Phase Inspection
- A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization
- Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1
- Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process
- Modelling of Explosives Sensitivity Part 1: The Bruceton Method
Schlagwörter für diesen Artikel
Economic design of control charts;
-control chart;
-R control charts
Artikel in diesem Heft
- Optimal Minimal Maintenance of Multistage Degraded System with Repairs
- Performability of Two Modules in Series
- Process Targeting for Optimal Capability when the Product is Subject to Degradation
- Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals
- A Process Control Plan with Two-Phase Inspection
- A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization
- Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1
- Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process
- Modelling of Explosives Sensitivity Part 1: The Bruceton Method
