A First-Passage Time Problem in Reliability Theory
-
Frank Beichelt
Abstract
A common replacement policy for technical systems consists in replacing a system by a new one after its economic lifetime, i.e. at that moment, when its long-run maintenance cost rate is minimal. The strict application of the economic lifetime does not take into account individual deviations of maintenance cost rates of single systems from the average cost development. To avoid this disadvantage, paper [Beichelt, Economic Quality Control 12: 173-181, 1997] proposes the total repair cost limit replacement policy: The system is replaced as soon as its total repair cost reaches or exceeds a given level. In that paper, the repair cost development is modeled by functions of the Wiener process. Here the same policy is considered assuming a repair cost process with nondecreasing samples paths and given one-dimensional probability distribution. Examples show that applying the total repair cost limit replacement policy instead of the economic lifetime may lead to cost savings between 4% and 30%. Finally, it is illustrated how to include the reliability aspect into the policy.
© Heldermann Verlag
Articles in the same Issue
- ARL Comparisons Between Neural Network Models and -Control Charts for Quality Characteristics that are Nonnormally Distributed
- A Note on the Convolution of the Uniform and Related Distributions and Their Use in Quality Control
- An Integrated Approach for Designing a Sampling Plan and Fixing Specifications
- Statistical Process Control Methods from the Viewpoint of Industrial Application
- A First-Passage Time Problem in Reliability Theory
- Availability of K-out-of-N:G Systems with Exponential Failures and General Repairs
- Selection of Sampling Schemes Indexed by Crossover Point for Compliance Testing
- Bayesian Single Sampling Plans for a Gamma Prior
- Neyman Measurement and Prediction Procedures
- Towards Practical and Synthetical Modelling of Repairable Systems
- Reliability Analysis of Systems with Time-Varying Failure Rates
Articles in the same Issue
- ARL Comparisons Between Neural Network Models and -Control Charts for Quality Characteristics that are Nonnormally Distributed
- A Note on the Convolution of the Uniform and Related Distributions and Their Use in Quality Control
- An Integrated Approach for Designing a Sampling Plan and Fixing Specifications
- Statistical Process Control Methods from the Viewpoint of Industrial Application
- A First-Passage Time Problem in Reliability Theory
- Availability of K-out-of-N:G Systems with Exponential Failures and General Repairs
- Selection of Sampling Schemes Indexed by Crossover Point for Compliance Testing
- Bayesian Single Sampling Plans for a Gamma Prior
- Neyman Measurement and Prediction Procedures
- Towards Practical and Synthetical Modelling of Repairable Systems
- Reliability Analysis of Systems with Time-Varying Failure Rates
