Article
Publicly Available
Improvement of corrosion resistance of austenitic stainless steels by means of glow-discharge nitriding
-
Alessio Fossati
Published/Copyright:
October 13, 2011
Published Online: 2011-10-13
Published in Print: 2011-11-01
©2011 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Guest Editorial
- Corrosion in Italy
- Reviews
- Electrochemical techniques for the repair of reinforced concrete suffering carbonation-induced corrosion
- Atomic layer deposition: state-of-the-art and research/industrial perspectives
- Improvement of corrosion resistance of austenitic stainless steels by means of glow-discharge nitriding
- Original Articles
- On the real effectiveness of experimental silicon alkoxides based pre-treatment as adhesion promoter for different painted metals
- Focused ion beam and transmission electron microscopy as a powerful tool to understand localized corrosion phenomena
- Representing localized corrosion processes through cellular automata
- Electrochemical noise for corrosion detection
- Study of the influence of sonication during the electrodeposition of nickel matrix nanocomposite coatings on the protective properties
- Hydrogen embrittlement behavior of HSLA line pipe steel under cathodic protection
- Influence of natural and artificial weathering on aesthetic and protective properties of organic coatings
- Influence of chloride and sulphate content on the performance of aluminium based galvanic anodes
Keywords for this article
austenitic stainless steels;
corrosion resistance;
glow-discharge nitriding;
low temperature nitriding;
S phase
Articles in the same Issue
- Guest Editorial
- Corrosion in Italy
- Reviews
- Electrochemical techniques for the repair of reinforced concrete suffering carbonation-induced corrosion
- Atomic layer deposition: state-of-the-art and research/industrial perspectives
- Improvement of corrosion resistance of austenitic stainless steels by means of glow-discharge nitriding
- Original Articles
- On the real effectiveness of experimental silicon alkoxides based pre-treatment as adhesion promoter for different painted metals
- Focused ion beam and transmission electron microscopy as a powerful tool to understand localized corrosion phenomena
- Representing localized corrosion processes through cellular automata
- Electrochemical noise for corrosion detection
- Study of the influence of sonication during the electrodeposition of nickel matrix nanocomposite coatings on the protective properties
- Hydrogen embrittlement behavior of HSLA line pipe steel under cathodic protection
- Influence of natural and artificial weathering on aesthetic and protective properties of organic coatings
- Influence of chloride and sulphate content on the performance of aluminium based galvanic anodes
