Zum Hauptinhalt springen
Artikel Öffentlich zugänglich

Picture of the Month

Veröffentlicht/Copyright: 10. Dezember 2024
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Practical Metallography
Aus der Zeitschrift Practical Metallography Band 62 Heft 1

Grasshopper / Heuschrecke

Edge of a cooling hole of a turbine blade with protective coating / Rand einer Kühlbohrung einer Turbinenschaufel mit Schutzbeschichtung

Haoyang Zhang

Institute of Metal Research

Chinese Academy of Sciences

Failure Analysis Center

Have you also made a snapshot? Send it to: (don‘t forget your name and your address). Every picture that is printed will be awarded and you will receive a little present.

Haben auch Sie einen Schnappschuss? Senden Sie diesen an: (mit Angabe von Namen und Adresse). Jedes abgedruckte Bild wird prämiert und Sie erhalten ein kleines Dankeschön.

Published Online: 2024-12-10
Published in Print: 2024-12-15

© 2024 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Contents
  2. Editorial
  3. Editorial
  4. Optimizing the design of the selective melt dispersion (SMD) process based on metallographic investigations of additively manufactured 316L steel samples
  5. Comparison of etchants for corrosion-resistant stainless steels in medical engineering
  6. Investigation on the impact of parameters of FSW on microstructural transitions and the strength of CDA 101 joints
  7. Failure Analysis
  8. Recommendations for the metallographic preparation of crack-like defects in PBF-LB/M additively manufactured alloy 625 builds
  9. Picture of the Month
  10. Picture of the Month
  11. People
  12. Cloeren Technology’s 20th anniversary
  13. News
  14. News
  15. Meeting Diary
  16. Meeting Diary
https://doi.org/10.1515/pm-2024-0097

Artikel in diesem Heft

  1. Contents
  2. Editorial
  3. Editorial
  4. Optimizing the design of the selective melt dispersion (SMD) process based on metallographic investigations of additively manufactured 316L steel samples
  5. Comparison of etchants for corrosion-resistant stainless steels in medical engineering
  6. Investigation on the impact of parameters of FSW on microstructural transitions and the strength of CDA 101 joints
  7. Failure Analysis
  8. Recommendations for the metallographic preparation of crack-like defects in PBF-LB/M additively manufactured alloy 625 builds
  9. Picture of the Month
  10. Picture of the Month
  11. People
  12. Cloeren Technology’s 20th anniversary
  13. News
  14. News
  15. Meeting Diary
  16. Meeting Diary
Heruntergeladen am 1.5.2026 von https://www.degruyterbrill.com/document/doi/10.1515/pm-2024-0097/html?lang=de
Button zum nach oben scrollen