Home Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
Article
Licensed
Unlicensed Requires Authentication

Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation

  • J. Bär , W. Berger and H.-J. Gudladt EMAIL logo
Published/Copyright: January 11, 2022
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 97 Issue 3

Abstract

The influence of damage and its correlation with the failure behaviour is discussed in the light of microstuctural aspects. The failure induced by microstructural mechanisms of the Al2O3-particle reinforced aluminium alloy 6061 under uniaxial tensile as well as under cyclic loading was investigated. The damage behaviour as a function of the strain ε can be correlated with stiffness E(ε). Under cyclic loading conditions the damage increases with the number of cycles and can be correlated with the strain amplitude εa. Furthermore, the damage is associated with crack formation and propagation and the damage evolution depends sensitively on the kind of deformation. The crack formation was detected by metallographic investigations and calculated by numerical methods (FEM), taking the size and shape of particles into account. Generally, damage under mechanical loading is initiated by broken particles and agglomerations of particles. In case of the particulate-reinforced specimens the evolution of damage is quite different for monotonic and cyclic loading conditions but, nevertheless, in both cases the damage parameter is given by inhomogeneities characteristic for the MMC which act as seeds for crack initiation.

Keywords: Damage behaviour; Metal matrix composite; FEM
Prof. Dr. H.-J. Gudladt Universität der Bundeswehr München Institut für Werkstoffkunde Fakultät für Luft- und Raumfahrttechnik 85577 Neubiberg, Germany Tel.: +49 89 6004 2534

Dedicated to Professor Dr. Gernot Kostorz on the occasion of his 65th birthday

References

[1] M.G. McKimpson, T. E. Scott: Mater. Sci. Eng. A 107 (1989) 93.10.1016/0921-5093(89)90378-XSearch in Google Scholar

[2] C.M. Friend: J. Mater. Sci. 22 (1987) 3005.10.1007/BF01086505Search in Google Scholar

[3] J. Dinwoodie, E. Moore, C.A.J. Langman, W.R. Symes, in: C.W. Harrigan Jr., J. Strife, A.K. Dhingra (Eds.), Proc. of the 5th Int. Conf. on Composite Materials, Metallurgical Society (1985) 671.Search in Google Scholar

[4] K. Ohori, H. Watanabe, Y. Takeuchi: Mater. Sci. Technol. 3 (1987) 57.10.1179/mst.1987.3.1.57Search in Google Scholar

[5] T.W. Clyne, M.G. Bader, G.R. Cappleman, P.A. Hubert: J. Mater. Sci. 20 (1985) 85.10.1007/BF00555902Search in Google Scholar

[6] M. Vedani, E. Gariboldi: Acta mater. 8 (1996) 3077.10.1016/1359-6454(95)00437-8Search in Google Scholar

[7] W. Berger: Ph.D. thesis, UniBw München (2000).Search in Google Scholar

[8] N.A. Fleck, in: K.J. Marh, R.A. Smith, R.O. Ritchie (Eds.), Fatigue Crack Measurement Techniques and Applications, Warley (1991) 69.Search in Google Scholar

[9] A. Krüger: Ph.D. thesis, UniBw München (1996).Search in Google Scholar

[10] R. Tavangar, L. Weber, A. Mortensen: Mater. Sci. Eng. A 395 (2005) 27.10.1016/j.msea.2004.12.009Search in Google Scholar

[11] H.-J. Gudladt, J. Bär, in: B. Vorsatz, E. Szöke (Eds.), Proc. of EUROMAT Topics 94 (1994) 319.Search in Google Scholar

[12] W. Berger, J. Bär, H.-J. Gudladt, in: Verbundwerkstoffe und Werkstoffverbunde, Wiley-Verlag, Weinheim (1999).Search in Google Scholar

[13] W. Berger, J. Bär, W. Kreuzer, H.-J. Gudladt, in: DVM-Bericht 518, Deutscher Verband für Materialforschung und Prüfung e.V., Berlin (1998).Search in Google Scholar

[14] E. Orowan, in:W.M. Murray (Ed.), Fatigue and Fracture of Metals (1952) 139.Search in Google Scholar

[15] T. Christman, A. Needleman, S. Suresh, in: Brown University Report No NSF-ENG-8451092-1-89 (1989).Search in Google Scholar

[16] P. Kenesei, H. Biermann, A. Borbély: Scripta Met. 53 (2005) 787.10.1016/j.scriptamat.2005.06.015Search in Google Scholar

[17] P. Kenesei, A. Borbély, H. Biermann: Mater. Sci. Eng. A 387 (2004) 852.10.1016/j.msea.2004.02.076Search in Google Scholar

[18] J. Llorca, A. Needleman, S. Suresh: Acta metal. mater. 39 (1991) 2317.10.1016/0956-7151(91)90014-RSearch in Google Scholar

[19] J. Llorca, S. Suresh, A. Needleman: Metall. Trans. A 23 (1991) 919.10.1007/BF02675568Search in Google Scholar

[20] V. Tvergaard, in: S.I. Anderson, H. Lillholt, O.B. Pedersen (Eds), Proc. of the 9th Riso, Int. Symp. on Metallurgy and Materials Science, Riso 51, Denmark (1988).Search in Google Scholar

[21] C.J. Sun, P. Saffari, K. Sadeghipour, G. Baran: Mat. Sci. Eng. A 405 (2005) 287.10.1016/j.msea.2005.06.032Search in Google Scholar

[22] L.L. Mishnaevsky: Mat. Sci. Eng. A 407 (2005) 11.10.1016/j.msea.2005.06.047Search in Google Scholar

[23] S. Schmauder, U. Weber, E. Soppa: Comp. Mat. Sci. 26 (2003) 142.10.1016/S0927-0256(02)00414-7Search in Google Scholar

[24] E. Soppa, S. Schmauder, G. Fischer, J. Brollo, U. Weber: Comp. Mat. Sci. 28 (2003) 574.10.1016/j.commatsci.2003.08.034Search in Google Scholar

[25] D.F. Watt, X.Q. Xu, D.J. Lloyd: Acta mater. 44 (1996) 789.10.1016/1359-6454(95)00209-XSearch in Google Scholar

[26] L.M. Kachanov, in: On the time to failure under creep conditions, Akad. Nauk. SSR, Otd. Tekkn. 8 (1958) 26.Search in Google Scholar

[27] J. Lemaitre: A course on damage mechanics, Springer-Verlag, Berlin (1996).10.1007/978-3-642-18255-6Search in Google Scholar
Received: 2005-10-28
Accepted: 2005-12-07
Published Online: 2022-01-11

© 2006 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Professor Dr. Gernot Kostorz 65 years
  3. Dislocation micromechanisms under single slip conditions
  4. Characterisation of short-range order using dislocations
  5. Between microscopic and mesoscopic descriptions of twin–twin interaction
  6. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  7. Recent progress in the area of bulk metallic glasses
  8. Formation of the ABC6-type ordered structure in fcc alloys
  9. Short-range order in Fe-21.9 at.% Al
  10. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  11. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  12. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  13. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  14. Small-angle scattering from spherical particles on randomly oriented interfaces
  15. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  16. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  17. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  18. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  19. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  20. Ag2Al plates in Al–Ag alloys
  21. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  22. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  23. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  24. Press/Presse
  25. Conferences/Konferenzen
  26. Frontmatter
  27. Editorial
  28. Professor Dr. Gernot Kostorz 65 years
  29. Articles BBasic
  30. Dislocation micromechanisms under single slip conditions
  31. Characterisation of short-range order using dislocations
  32. Between microscopic and mesoscopic descriptions of twin–twin interaction
  33. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  34. Recent progress in the area of bulk metallic glasses
  35. Formation of the ABC6-type ordered structure in fcc alloys
  36. Short-range order in Fe-21.9 at.% Al
  37. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  38. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  39. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  40. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  41. Small-angle scattering from spherical particles on randomly oriented interfaces
  42. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  43. Articles AApplied
  44. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  45. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  46. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  47. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  48. Ag2Al plates in Al–Ag alloys
  49. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  50. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  51. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  52. Notifications/Mitteilungen
  53. Press/Presse
  54. Conferences/Konferenzen
https://doi.org/10.1515/ijmr-2006-0054
Keywords for this article
Damage behaviour; Metal matrix composite; FEM

Articles in the same Issue

  1. Frontmatter
  2. Professor Dr. Gernot Kostorz 65 years
  3. Dislocation micromechanisms under single slip conditions
  4. Characterisation of short-range order using dislocations
  5. Between microscopic and mesoscopic descriptions of twin–twin interaction
  6. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  7. Recent progress in the area of bulk metallic glasses
  8. Formation of the ABC6-type ordered structure in fcc alloys
  9. Short-range order in Fe-21.9 at.% Al
  10. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  11. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  12. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  13. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  14. Small-angle scattering from spherical particles on randomly oriented interfaces
  15. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  16. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  17. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  18. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  19. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  20. Ag2Al plates in Al–Ag alloys
  21. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  22. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  23. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  24. Press/Presse
  25. Conferences/Konferenzen
  26. Frontmatter
  27. Editorial
  28. Professor Dr. Gernot Kostorz 65 years
  29. Articles BBasic
  30. Dislocation micromechanisms under single slip conditions
  31. Characterisation of short-range order using dislocations
  32. Between microscopic and mesoscopic descriptions of twin–twin interaction
  33. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  34. Recent progress in the area of bulk metallic glasses
  35. Formation of the ABC6-type ordered structure in fcc alloys
  36. Short-range order in Fe-21.9 at.% Al
  37. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  38. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  39. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  40. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  41. Small-angle scattering from spherical particles on randomly oriented interfaces
  42. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  43. Articles AApplied
  44. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  45. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  46. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  47. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  48. Ag2Al plates in Al–Ag alloys
  49. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  50. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  51. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  52. Notifications/Mitteilungen
  53. Press/Presse
  54. Conferences/Konferenzen
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 2.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0054/html
Scroll to top button