Startseite Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys

  • Lidia Lityńska EMAIL logo , Jan Dutkiewicz und Krzysztof Parliński
Veröffentlicht/Copyright: 11. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 3

Abstract

The structure of Al3Sc precipitates in Al –Mg– Si–Cu – Sc –Zr alloys annealed at 450 °C was investigated using transmission electron microscopy and energy-dispersive X-ray spectroscopy. The Al3Sc particles contain mainly Sc and small amounts of Zr, Si, and Cu. The addition of Zr limits the size of the Al3Sc precipitates to about 10– 30 nm, and these precipitates are coherent with the matrix. Density functional energy calculations showed that exceptionally small energies are required to dissolve Zr and Cu in Sc and Al sublattices, respectively. On the contrary, Cu, Mg, and Si are difficult to be dissolved in the Sc sublattice.

Keywords: Al –Mg– Si– Cu; Al3Sc; Ab initio calculation; Defect energy; TEM
Dr. Lidia Lityńska Institute of Metallurgy and Materials Science Polish Academy of Sciences Reymonta 25, 30-059 Kraków, Poland Tel.: +48 12 637 4200 Fax: +48 12 637 2192

Dedicated to Professor Dr. Gernot Kostorz on the occasion of his 65th birthday

  1. The authors acknowledge the financial support of the State Committee for Scientific Research in Poland (Research Project 4T08B 008 24).

References

[1] L.S. Toropova, D.G. Eskin, M.L. Kharakterova, T.V. Dobatkina: Advanced Aluminum Alloys Containing Scandium, Gordon and Breach Science Publishers (1998).Suche in Google Scholar

[2] A.F. Norman, P.B. Prangnell, R.S. McEwen: Acta Mater. 46 (1998) 5715.10.1016/S1359-6454(98)00257-2Suche in Google Scholar

[3] V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatov, V.I. Yalagin: Mater. Sci. Eng. A 280 (2000) 30.10.1016/S0921-5093(99)00652-8Suche in Google Scholar

[4] G. Novotny, A.J. Ardell: Mater. Sci. Eng. A 318 (2001) 144.10.1016/S0921-5093(01)01326-0Suche in Google Scholar

[5] E.A. Marquis, D.N. Seidman: Acta Mater. 49 (2001) 1909.10.1016/S1359-6454(01)00116-1Suche in Google Scholar

[6] M.J. Jones, F.J. Hamphreys: Acta Mater. 52 (2003) 2149.10.1016/S1359-6454(03)00002-8Suche in Google Scholar

[7] Y. Harada, D.C. Dunand: Scr. Mater. 48 (2003) 219.10.1016/S1359-6462(02)00428-1Suche in Google Scholar

[8] Y.W. Riddle, T.H. Sanders: Metall. Mater. Trans. A 35 (2004) 341.10.1007/s11661-004-0135-3Suche in Google Scholar

[9] A. Tolley, V. Radmilovic, U. Dahmen: Scr. Mater. 52 (2005) 621.10.1016/j.scriptamat.2004.11.021Suche in Google Scholar

[10] B. Forbord, W. Lefebvre, F. Danoix, H. Hallem, K. Marthinsen: Scr. Mater. 51 (2004) 333.10.1016/j.scriptamat.2004.03.033Suche in Google Scholar

[11] S. Iwamura, M. Nakayama, Y. Miura: Mater. Sci. Forum 396–402 (2002) 1151.10.4028/www.scientific.net/MSF.396-402.1151Suche in Google Scholar

[12] W.Wolf, R. Podloucky, P. Rogl, H. Erschbaumer: Intermetallics 4 (1996) 201.10.1016/0966-9795(95)00036-4Suche in Google Scholar

[13] K. Parlinski, P.T. Jochym, R. Kozubski, P. Oramus: Intermetallics 11 (2003) 157.10.1016/S0966-9795(02)00195-4Suche in Google Scholar

[14] G. Lorimer, G. Cliff, P. Champness, C. Dickinson, F. Hasan, P. Kenway, in: D. Williams, D. Joy (Eds.), Analytical Electron Microscopy, San Francisco Press (1984) 153.Suche in Google Scholar

[15] G. Kresse, J. Furthmüller: Software VASP, Vienna (1999).Suche in Google Scholar

[16] G. Kresse, J. Furthmüller: Phys. Rev. B 54 (1996) 11169.10.1103/PhysRevB.54.11169Suche in Google Scholar

[17] G. Kresse, J. Furthmüller: Comput. Mater. Science 6 (1996) 15.10.1016/0927-0256(96)00008-0Suche in Google Scholar

[18] G. Kresse, J. Hafner: Phys. Rev. B 47 (1993) 558.10.1103/PhysRevB.47.558Suche in Google Scholar

[19] G. Kresse, J. Hafner: Phys. Rev. B 49 (1994) 14251.10.1103/PhysRevB.49.14251Suche in Google Scholar

[20] P.E. Blochl: Phys. Rev. B 50 (1994) 17953.10.1103/PhysRevB.50.17953Suche in Google Scholar

[21] G. Kresse, J. Joubert: Phys. Rev. B 59 (1999) 1758.10.1103/PhysRevB.59.1758Suche in Google Scholar

[22] T. Sato, A. Kamio, G.W. Lorimer: Mater. Sci. Forum 217–222 (1996) 89510.4028/www.scientific.net/MSF.217-222.895Suche in Google Scholar
Received: 2005-10-10
Accepted: 2005-12-20
Published Online: 2022-01-11

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Professor Dr. Gernot Kostorz 65 years
  3. Dislocation micromechanisms under single slip conditions
  4. Characterisation of short-range order using dislocations
  5. Between microscopic and mesoscopic descriptions of twin–twin interaction
  6. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  7. Recent progress in the area of bulk metallic glasses
  8. Formation of the ABC6-type ordered structure in fcc alloys
  9. Short-range order in Fe-21.9 at.% Al
  10. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  11. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  12. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  13. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  14. Small-angle scattering from spherical particles on randomly oriented interfaces
  15. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  16. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  17. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  18. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  19. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  20. Ag2Al plates in Al–Ag alloys
  21. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  22. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  23. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  24. Press/Presse
  25. Conferences/Konferenzen
  26. Frontmatter
  27. Editorial
  28. Professor Dr. Gernot Kostorz 65 years
  29. Articles BBasic
  30. Dislocation micromechanisms under single slip conditions
  31. Characterisation of short-range order using dislocations
  32. Between microscopic and mesoscopic descriptions of twin–twin interaction
  33. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  34. Recent progress in the area of bulk metallic glasses
  35. Formation of the ABC6-type ordered structure in fcc alloys
  36. Short-range order in Fe-21.9 at.% Al
  37. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  38. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  39. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  40. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  41. Small-angle scattering from spherical particles on randomly oriented interfaces
  42. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  43. Articles AApplied
  44. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  45. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  46. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  47. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  48. Ag2Al plates in Al–Ag alloys
  49. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  50. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  51. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  52. Notifications/Mitteilungen
  53. Press/Presse
  54. Conferences/Konferenzen
https://doi.org/10.1515/ijmr-2006-0051
Schlagwörter für diesen Artikel
Al –Mg– Si– Cu; Al3Sc; Ab initio calculation; Defect energy; TEM

Artikel in diesem Heft

  1. Frontmatter
  2. Professor Dr. Gernot Kostorz 65 years
  3. Dislocation micromechanisms under single slip conditions
  4. Characterisation of short-range order using dislocations
  5. Between microscopic and mesoscopic descriptions of twin–twin interaction
  6. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  7. Recent progress in the area of bulk metallic glasses
  8. Formation of the ABC6-type ordered structure in fcc alloys
  9. Short-range order in Fe-21.9 at.% Al
  10. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  11. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  12. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  13. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  14. Small-angle scattering from spherical particles on randomly oriented interfaces
  15. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  16. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  17. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  18. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  19. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  20. Ag2Al plates in Al–Ag alloys
  21. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  22. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  23. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  24. Press/Presse
  25. Conferences/Konferenzen
  26. Frontmatter
  27. Editorial
  28. Professor Dr. Gernot Kostorz 65 years
  29. Articles BBasic
  30. Dislocation micromechanisms under single slip conditions
  31. Characterisation of short-range order using dislocations
  32. Between microscopic and mesoscopic descriptions of twin–twin interaction
  33. Influence of the thermoelastic effect on the acoustic properties of pure metals at low temperatures
  34. Recent progress in the area of bulk metallic glasses
  35. Formation of the ABC6-type ordered structure in fcc alloys
  36. Short-range order in Fe-21.9 at.% Al
  37. Criteria for developing castable, creep-resistant aluminum-based alloys – A review
  38. Phase decomposition and precipitation of metastable A2 phase in B2 ordered Co–Al–Fe alloys
  39. Atomic migration and ordering phenomena in bulk and thin films of FePd and FePt
  40. Late-stage coarsening of oil droplets of excess oil in microemulsions following a temperature quench
  41. Small-angle scattering from spherical particles on randomly oriented interfaces
  42. Ripening of L12 Ni3Ti precipitates in the framework of the trans-interface diffusion-controlled theory of particle coarsening
  43. Articles AApplied
  44. Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600 °C
  45. Modulated structures in amorphous films of Cr-silicide prepared by electron-beam-deposition
  46. Early stages of nucleation and growth of Guinier –Preston zones in Al–Zn–Mg and Al–Zn–Mg–Cu alloys
  47. Experimental and theoretical characterization of Al3Sc precipitates in Al–Mg–Si–Cu–Sc–Zr alloys
  48. Ag2Al plates in Al–Ag alloys
  49. A critical analysis of the composite model as applied to high-temperature creep of Al and an Al–Mg alloy
  50. Damage behaviour of an Al2O3 particle-reinforced 6061 alloy induced by monotonic and cyclic deformation
  51. Deformation behaviour of ultrafine-grained magnesium with 3 vol.% graphite
  52. Notifications/Mitteilungen
  53. Press/Presse
  54. Conferences/Konferenzen
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 2.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0051/pdf
Button zum nach oben scrollen