Startseite Examination of the mode I critical stress intensity factor of wood obtained by single-edge-notched bending test
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Examination of the mode I critical stress intensity factor of wood obtained by single-edge-notched bending test

  • Hiroshi Yoshihara
Veröffentlicht/Copyright: 4. Mai 2010
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Holzforschung
Aus der Zeitschrift Band 64 Heft 4

Abstract

The critical stress intensity factor of mode I (KIc) obtained by single-edge-notched bending (SENB) tests of wood was experimentally and numerically analyzed. A double cantilever beam (DCB) test was also conducted and the results were compared with those of SENB tests. The KIc value was obtained by introducing an additional crack length into the equations used for analyzing the SENB test of isotropic material when the initial crack length ranged from 0.1 to 0.6 times the depth of the specimen.

Keywords: critical stress intensity factor of mode I; double cantilever beam test (DCB); finite element analysis (FEA); single-edge-notched bending test (SENB); virtual crack closure technique (VCCT)
Corresponding author. Faculty of Science and Engineering, Shimane University, Nishikawazu-cho 1060, Matsue, Shimane 690-8504, Japan
Received: 2009-12-1
Accepted: 2010-1-25
Published Online: 2010-05-04
Published Online: 2010-05-4
Published in Print: 2010-06-01

©2010 by Walter de Gruyter Berlin New York

Artikel in diesem Heft

  1. Original Papers
  2. Pre-extraction of hemicelluloses and subsequent ASA and ASAM pulping: Comparison of autohydrolysis and alkaline extraction
  3. Effect of drying and rewetting of wood on cellulose molecular packing
  4. Determination of native (wood derived) formaldehyde by the desiccator method in particleboards generated during panel production
  5. A computational study of pyrolysis reactions of lignin model compounds
  6. Energy reduction of refining by cellulases
  7. Macro- and micro-mechanical properties of red oak wood (Quercus rubra L.) treated with hemicellulases
  8. Acoustic emission measurements and lattice simulations of microfracture events in spruce
  9. Impact of organosilicon treatments on the wood-water relationship of solid wood
  10. Analysis of the water vapour sorption behaviour of Sitka spruce [Picea sitchensis (Bongard) Carr.] based on the parallel exponential kinetics model
  11. Effects of modification with glutaraldehyde on the mechanical properties of wood
  12. Effect of glutaraldehyde on water related properties of solid wood
  13. Creep behavior of bamboo under various desorption conditions
  14. Predicting the longitudinal modulus of elasticity of Sitka spruce from cellulose orientation and abundance
  15. Examination of the mode I critical stress intensity factor of wood obtained by single-edge-notched bending test
  16. Potential Brazilian wood species for bows of string instruments
  17. Non-destructive assessment of green density and moisture condition in plantation-grown radiata pine (Pinus radiata D. Don.) by increment core measurements
  18. Development of wood decay in wound-initiated discolored wood of eastern red cedar
  19. The effects of subthreshold loadings of tebuconazole, DDAC, and boric acid on wood decay by Postia placenta
  20. Short Notes
  21. New aspects of residual lignin isolation
  22. Personalia
  23. Horst H. Nimz celebrated his 80th birthday on April 21st, 2010
  24. Meetings
  25. Meetings
https://doi.org/10.1515/hf.2010.083
Schlagwörter für diesen Artikel
critical stress intensity factor of mode I; double cantilever beam test (DCB); finite element analysis (FEA); single-edge-notched bending test (SENB); virtual crack closure technique (VCCT)

Artikel in diesem Heft

  1. Original Papers
  2. Pre-extraction of hemicelluloses and subsequent ASA and ASAM pulping: Comparison of autohydrolysis and alkaline extraction
  3. Effect of drying and rewetting of wood on cellulose molecular packing
  4. Determination of native (wood derived) formaldehyde by the desiccator method in particleboards generated during panel production
  5. A computational study of pyrolysis reactions of lignin model compounds
  6. Energy reduction of refining by cellulases
  7. Macro- and micro-mechanical properties of red oak wood (Quercus rubra L.) treated with hemicellulases
  8. Acoustic emission measurements and lattice simulations of microfracture events in spruce
  9. Impact of organosilicon treatments on the wood-water relationship of solid wood
  10. Analysis of the water vapour sorption behaviour of Sitka spruce [Picea sitchensis (Bongard) Carr.] based on the parallel exponential kinetics model
  11. Effects of modification with glutaraldehyde on the mechanical properties of wood
  12. Effect of glutaraldehyde on water related properties of solid wood
  13. Creep behavior of bamboo under various desorption conditions
  14. Predicting the longitudinal modulus of elasticity of Sitka spruce from cellulose orientation and abundance
  15. Examination of the mode I critical stress intensity factor of wood obtained by single-edge-notched bending test
  16. Potential Brazilian wood species for bows of string instruments
  17. Non-destructive assessment of green density and moisture condition in plantation-grown radiata pine (Pinus radiata D. Don.) by increment core measurements
  18. Development of wood decay in wound-initiated discolored wood of eastern red cedar
  19. The effects of subthreshold loadings of tebuconazole, DDAC, and boric acid on wood decay by Postia placenta
  20. Short Notes
  21. New aspects of residual lignin isolation
  22. Personalia
  23. Horst H. Nimz celebrated his 80th birthday on April 21st, 2010
  24. Meetings
  25. Meetings
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 2.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/hf.2010.083/html
Button zum nach oben scrollen