Startseite Performance improvement of poplar wood based on the synergies of furfurylation and polyethylene glycol impregnation
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Performance improvement of poplar wood based on the synergies of furfurylation and polyethylene glycol impregnation

  • Tiantian Yang EMAIL logo , Shaodi Zhang , Changtong Mei und Erni Ma
Veröffentlicht/Copyright: 7. Juli 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Holzforschung
Aus der Zeitschrift Holzforschung Band 76 Heft 9

Abstract

Fast-growing wood usually exhibits dimensional instability and inferior mechanical strength, which severely obstructs its wide application. To improve the dimensional stability and mechanical strength, biomass-derived furfuryl alcohol combined with polyethylene glycol (PEG) was vacuum-impregnated into wood hierarchical structures, causing cell wall bulking and porosity reduction. Furfural resin and PEG distributed in cell lumina, cell walls and middle lamella regions indicated by analyses of scanning electron microscope and fourier transform infrared spectroscopy. Wood porosity was generally reduced and the specific surface area decreased by over 65% analyzed by the nitrogen absorption. Consequently, wood hydrophobicity and dimensional stability were highly improved, and the water absorption and volumetric change decreased by over 55% and 78%. The flexural strength and modulus elasticity were improved by over 49% and 46%. Furfural resin helped the fixation of PEG in wood and significantly reduced PEG leaching. PEG with flexible linear molecular structure formed interpenetrating polymer network in wood hierarchical structures with furfural resin and reduced self-crosslinking of furfural resin. Accordingly, the impact toughness of compound modified wood increased by 39% compared with solely furfurylated wood. This study provided efficient and sustainable concepts to facilitate better industrialized application of wood furfurylation and improve service value of fast-growing wood.

Keywords: fast-growing wood; furfurylation; mechanical performance improvement; PEG impregnation; physical performance improvement
Corresponding author: Tiantian Yang, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing, 210037, China; and Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, China, E-mail:

Funding source: Research Start-up Funding of Nanjing Forestry University

Award Identifier / Grant number: 163020242

Funding source: College Student Practice and Innovation Training Program of Nanjing Forestry University

Award Identifier / Grant number: 2021NFUSPITP0108

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: This work was supported by the Research Start-up Funding of Nanjing Forestry University (163020242) and the College Student Practice and Innovation Training Program of Nanjing Forestry University (2021NFUSPITP0108).

  3. Conflict of interest statement: The authors declare that they have no conflicts of interest regarding this article.

References

Akpan, E.I., Wetzel, B., and Friedrich, K. (2021). Eco-friendly and sustainable processing of wood-based materials. Green Chem. 23: 2198–2232.10.1039/D0GC04430JSuche in Google Scholar

Barrett, E.P., Joyner, L.G., and Halenda, P.H. (1951). The determination of pore volume and area distribution in porous substances. J. Am. Chem. Soc. 73: 373–380, https://doi.org/10.1021/ja01145a126.Suche in Google Scholar

Baysal, E., Ozaki, S.K., and Yalinkilic, M.K. (2004). Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates. Wood Sci. Technol. 38: 405–415, https://doi.org/10.1007/s00226-004-0248-2.Suche in Google Scholar

Broda, M. (2018). Biological effectiveness of archaeological oak wood treated with methyltrimethoxysilane and PEG against brown-rot fungi and moulds. Int. Biodeterior. Biodegrad. 134: 110–116, https://doi.org/10.1016/j.ibiod.2018.09.001.Suche in Google Scholar

Brunauer, S., Emmett, P.H., and Teller, E. (1938). Adsorption of gases in multi-molecular layers. J. Am. Chem. Soc. 60: 309–319, https://doi.org/10.1021/ja01269a023.Suche in Google Scholar

Epmeier, H. (2004). Differently modified wood: comparison of some selected properties. Scand. J. For. Res. 19: 31–37, https://doi.org/10.1080/02827580410017825.Suche in Google Scholar

Ermeydan, M.A. (2018). Modification of spruce wood by uv-crosslinked peg hydrogels inside wood cell walls. React. Funct. Polym. 131: 100–106, https://doi.org/10.1016/j.reactfunctpolym.2018.07.013.Suche in Google Scholar

Esteves, B., Nunes, L., and Pereira, H. (2011). Properties of furfurylated wood (Pinus pinaster). Eur. J. Wood Prod. 69: 521–525.10.1007/s00107-010-0480-4Suche in Google Scholar

Fejfer, M., Majka, J., and Zborowska, M. (2020). Dimensional stability of waterlogged Scots pine wood treated with peg and dried using an alternative approach. Forests 11: 1254, https://doi.org/10.3390/f11121254.Suche in Google Scholar

Frihart, C.R., Hunt, C.G., and Moon, R.J. (2009). International conference of wood adhesives proceedings, characterizing polymeric methylene diphenyl diisocyanate reactions with wood: 2. Nano-indentation. For. Prod. Soc., Wisconsin.Suche in Google Scholar

Gong, W., Chen, C., Zhang, Y., Zhou, H., Wang, H., Zhang, H., Zhang, Y., Wang, G., and Zhao, H. (2017). Efficient synthesis of furfuryl alcohol from H2-hydrogenation/transfer hydrogenation of furfural using sulfonate group modified Cu catalyst. ACS Sustain. Chem. Eng. 5: 2172–2180, https://doi.org/10.1021/acssuschemeng.6b02343.Suche in Google Scholar

Gustavsson, L., Joelsson, A., and Sathre, R. (2010). Life cycle primary energy use and carbon emission of an eight-storey wood-framed apartment building. Energy Build. 42: 230–242.10.1016/j.enbuild.2009.08.018Suche in Google Scholar

He, L., Yu, Y., Yu, Y.S., Tian, G.L., and Wang, H.K. (2012). Stability and mechanical performance of furfurylated Chinese fir. China Wood Industry 26: 22–28.Suche in Google Scholar

Hill, C., Hughes, M., and Gudsell, D. (2021). Environmental impact of wood modification. Coatings 11: 366, https://doi.org/10.3390/coatings11030366.Suche in Google Scholar

Huang, Y.X., Meng, F.D., Liu, R., Yu, Y.L., and Yu, W.J. (2019). Morphology and supramolecular structure characterization of cellulose isolated from heat-treated moso bamboo. Cellulose 26: 7067–7078.10.1007/s10570-019-02614-7Suche in Google Scholar

Jones, D. and Sandberg, D. (2020). A review of wood modification globally – updated findings from cost fp1407. Interdiscipl. Perspect. Built Environ. 1–31, https://doi.org/10.37947/ipbe.2020.vol1.1.Suche in Google Scholar

Klemens, H.K., Abrahamsson, K., Bjrdal, C., and Walsh, A. (2020). An in situ Raman spectroscopic method for quantification of polyethylene glycol (peg) in waterlogged archaeological wood. Holzforschung 74: 1043–1051.10.1515/hf-2019-0238Suche in Google Scholar

Lande, S., Westin, M., and Schneider, M. (2004). Properties of furfurylated wood. Scand. J. For. Res. 19: 22–30, https://doi.org/10.1080/0282758041001915.Suche in Google Scholar

Lande, S., Westin, M., and Schneider, M. (2008). Development of modified wood products based on furan chemistry. Mol. Cryst. Liq. Cryst. 484: 1–367.10.1080/15421400801901456Suche in Google Scholar

Li, M. and Wang, C. (2019). Preparation and characterization of GO/PEG photo-thermal conversion form-stable composite phase change materials. Renew. Energy 141: 1005–1012.10.1016/j.renene.2019.03.141Suche in Google Scholar

Li, W.J., Liu, M.H., Wang, H.K., and Yu, Y. (2020b). Fabrication of highly stable and durable furfurylated wood materials. Part I: process optimization. Holzforschung 74: 1135–1146, https://doi.org/10.1515/hf-2019-0286.Suche in Google Scholar

Li, W.J., Liu, M.H., Wang, H.K., Zhai, H.B., and Yu, Y. (2021). The furfuryl alcohol (FA) resin distribution in the furfurylated bamboo. Holzforschung 75: 187–194, https://doi.org/10.1515/hf-2020-0007.Suche in Google Scholar

Li, Y., Li, X.J., Liu, D.D., Cheng, X.Y., He, X., Wu, Y.Q., Li, X.G., and Huang, Q.T. (2016). Fabrication and properties of polyethylene glycol-modified wood composite for energy storage and conversion. Bioresources 11: 7790–7802, https://doi.org/10.15376/biores.11.3.7790-7802.Suche in Google Scholar

Li, Y.F., Chen, C.J., Song, J.W., Yang, C.P., Kuang, Y.D., Vellore, A., Hitz, E., Zhu, M.W., Jiang, F., Yao, Y.G., et al.. (2020a). Strong and superhydrophobic wood with aligned cellulose nanofibers as a waterproof structural material. Chin. J. Chem. 38: 823–829, https://doi.org/10.1002/cjoc.202000032.Suche in Google Scholar

Liu, M.H., Guo, F., Wang, H.K., Ren, W.T., Gao, M.D., and Yu, Y. (2020). Highly stable wood material with low resin consumption via vapor phase furfurylation in cell walls. ACS Sustain. Chem. Eng. 8: 13924–13933.10.1021/acssuschemeng.0c03172Suche in Google Scholar

Liu, Z., Wei, H., Tang, B., Xu, S.M., and Zhang, S.F. (2018). Novel light-driven CF/PEG/SiO2 composite phase change materials with high thermal conductivity. Sol. Energy Mater. Sol. Cells 174: 538–544.10.1016/j.solmat.2017.09.045Suche in Google Scholar

Macromolecule, A. (1958). Physical properties of macromolecules. Tokyo: Kyoritsu Press.Suche in Google Scholar

Majka, J., Zborowska, M., Fejfer, M., Waliszewska, B., and Olek, W. (2018). Dimensional stability and hygroscopic properties of peg treated irregularly degraded waterlogged Scots pine wood. J. Cult. Herit. 31: 133–140, https://doi.org/10.1016/j.culher.2017.12.002.Suche in Google Scholar

Mantanis, G.I. (2017). Chemical modification of wood by acetylation and furfurylation: a review of the present scaled-up technologies. Bioresources 12: 4478–4489, https://doi.org/10.15376/biores.12.2.4478-4489.Suche in Google Scholar

Mortensen, M.N., Egsgaard, H., Hvilsted, S., Shashoua, Y., and Glastrup, J. (2007). Characterisation of the polyethylene glycol impregnation of the Swedish warship Vasa and one of the Danish Skuldelev Viking ships. J. Archaeol. Sci. 34: 1211–1218, https://doi.org/10.1016/j.jas.2006.10.012.Suche in Google Scholar

Müller, U. and Steiner, M. (2010). Colour stabilisation of wood composites using polyethylene glycol and melamine resin. Eur. J. Wood Prod. 68: 435–443, https://doi.org/10.1007/s00107-009-0386-1.Suche in Google Scholar

Norimoto, M. and Gril, J. (1993). Structure and properties of chemically treated woods. In: Shiraishi, N., Kajita, H., and Norimoto, M. (Eds.), Recent research on wood and wood-based materials. Barking, UK, Elsevier, pp. 135–154.10.1016/B978-1-4831-7821-9.50019-8Suche in Google Scholar

Oishi, S.S., Rezende, M.C., Origo, F.D., Damiao, A.J., and Botelho, E.C. (2013). Viscosity, pH, and moisture effect in the porosity of poly (furfuryl alcohol). J. Appl. Polym. Sci. 128: 1680–1686, https://doi.org/10.1002/app.38332.Suche in Google Scholar

Pilgård, A., De Vetter, L., Van Acker, J., and Westin, M. (2010). Toxic hazard of leachates from furfurylated wood: comparison between two different aquatic organisms. Environ. Toxicol. Chem. 29: 1067–1071, https://doi.org/10.1002/etc.132.Suche in Google Scholar PubMed

Sing, K.S.W., Everett, D.H., Haul, R.A.W., Moscou, L., Pierotti, R.A., Rouquerol, J., and Siemieniewska, T. (1985). Reporting physisorption data for gas-solid systems. Pure Appl. Chem. 57: 603–619. http://dx.doi.org/10.1351/pac198557040603.10.1002/9783527610044.hetcat0065Suche in Google Scholar

Sreehari, H., Gopika, V., Jayan, J.S., Sethulekshmi, A.S., and Saritha, A. (2022). A comprehensive review on bio epoxy based IPN: synthesis, properties and applications. Polymer 252: 124950.10.1016/j.polymer.2022.124950Suche in Google Scholar

Shen, X.S., Guo, D.K., Jiang, P., Yang, S., Li, G.Y., and Chu, F.X. (2021a). Water vapor sorption mechanism of furfurylated wood. J. Mater. Sci. 56: 11324–11334, https://doi.org/10.1007/s10853-021-06041-7.Suche in Google Scholar

Shen, X.S., Guo, D.K., Jiang, P., Li, G.Y., Yang, S., and Chu, F.X. (2021b). Reaction mechanisms of furfuryl alcohol polymer with wood cell wall components. Holzforschung 75: 1150–1158.10.1515/hf-2020-0271Suche in Google Scholar

Skrede, I., Solbakken, M.H., Hess, J., Fossdal, C.G., Hegnar, O., and Alfredsen, G. (2019). Wood modification by furfuryl alcohol caused delayed decomposition response in Rhodonia (Postia) placenta. Appl. Environ. Microbiol. 85: e00338–19, https://doi.org/10.1128/AEM.00338-19.Suche in Google Scholar PubMed PubMed Central

Ulbricht, J., Jordan, R., and Luxenhofer, R. (2014). On the biodegradability of polyethylene glycol, polypeptoids and poly(2-oxazoline)s. Biomaterials 35: 4848–4861, https://doi.org/10.1016/j.biomaterials.2014.02.029.Suche in Google Scholar PubMed

Wang, J.M., Yang, T.T., Zhang, S.D., and Cao, J.Z. (2022). Application of polyvinyl alcohol (PVA) as a toughening agent in wood furfurylation. Holzforschung 76: 380–390, https://doi.org/10.1515/hf-2021-0144.Suche in Google Scholar

Xu, J.Q., Yang, T.T., Xu, X., Guo, X., and Cao, J.Z. (2020). Processing solid wood into a composite phase change material for thermal energy storage by introducing silica-stabilized polyethylene glycol. Compos. Part A Appl. Sci. Manuf. 139: 106098.10.1016/j.compositesa.2020.106098Suche in Google Scholar

Yang, T.T., Cao, J.Z., and Ma, E.N. (2019a). How does delignification influence the furfurylation of wood? Ind. Crop. Prod. 135: 91–98, https://doi.org/10.1016/j.indcrop.2019.04.019.Suche in Google Scholar

Yang, T.T., Ma, E.N., and Cao, J.Z. (2019b). Synergistic effects of partial hemicellulose removal and furfurylation on improving the dimensional stability of poplar wood tested under dynamic condition. Ind. Crop. Prod. 139: 111550, https://doi.org/10.1016/j.indcrop.2019.111550.Suche in Google Scholar

Yang, T.T., Cao, J.Z., Mei, C.T., and Ma, E.N. (2022). Inhibiting wood–water interactions by hydrothermal hemicellulose extraction combined with furfurylation. Holzforschung 76: 245–255, https://doi.org/10.1515/hf-2021-0078.Suche in Google Scholar

Yin, J.P., Yuan, T.Q., Lu, Y., Song, K.L., Li, H.Y., Zhao, G.J., and Yin, Y.F. (2017). Effect of compression combined with steam treatment on the porosity, chemical composition and cellulose crystalline structure of wood cell walls. Carbohydr. Polym. 155: 163–172, https://doi.org/10.1016/j.carbpol.2016.08.013.Suche in Google Scholar PubMed

Zhang, F.D., Xu, C.H., Li, M.Y., Huang, A.M., and Sun, S.Q. (2014). Rapid identification of Pterocarpus santalinus and Dalbergia louvelii by FTIR and 2D correlation IR spectroscopy. J. Mol. Struct. 1069: 89–95, https://doi.org/10.1016/j.molstruc.2014.01.085.Suche in Google Scholar

Zheng, B.P., Bi, C.Q., Zhu, R.F., Sun, J.F., Wen, X.F., Chen, F.D., Liu, Y., and Gao, J.G. (2015). Study on toughened furan resin chemically modified by poly(ethylene glycol)s. J. Anhui Polytech. Univ. 30: 40–43.Suche in Google Scholar
Received: 2022-05-10
Accepted: 2022-06-21
Published Online: 2022-07-07
Published in Print: 2022-09-27

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Original Articles
  3. Variation analyses of extractive contents by NIR-spectroscopy bring out the differences between agroforestry and forestry walnut (Juglans regia × nigra) trees
  4. Correlation between lignin content and syringyl-to-guaiacyl (S/G) ratio of Eucalyptus globulus wood
  5. Accelerated relaxation behavior during water desorption in the mechano-sorptive creep of wood: modeling and analysis based on the free volume concept and Kohlausch–Williams–Watts function
  6. Degradation of beech wood by Kretzschmaria deusta: its heterogeneity and influence on dynamic and static bending properties
  7. Performance improvement of poplar wood based on the synergies of furfurylation and polyethylene glycol impregnation
  8. Artificial lignification of a cellulose microfibril-based hydrogel and resulting effect on tensile properties
  9. Depolymerisation of kraft lignin to obtain high value-added products: antioxidants and UV absorbers
  10. A CP/MAS 13C NMR investigation of cellulose ultrastructure in traditional Chinese handmade papers
  11. Quality control of natural cork stoppers by image analysis and oxygen transmission rate
https://doi.org/10.1515/hf-2022-0083
Schlagwörter für diesen Artikel
fast-growing wood; furfurylation; mechanical performance improvement; PEG impregnation; physical performance improvement

Artikel in diesem Heft

  1. Frontmatter
  2. Original Articles
  3. Variation analyses of extractive contents by NIR-spectroscopy bring out the differences between agroforestry and forestry walnut (Juglans regia × nigra) trees
  4. Correlation between lignin content and syringyl-to-guaiacyl (S/G) ratio of Eucalyptus globulus wood
  5. Accelerated relaxation behavior during water desorption in the mechano-sorptive creep of wood: modeling and analysis based on the free volume concept and Kohlausch–Williams–Watts function
  6. Degradation of beech wood by Kretzschmaria deusta: its heterogeneity and influence on dynamic and static bending properties
  7. Performance improvement of poplar wood based on the synergies of furfurylation and polyethylene glycol impregnation
  8. Artificial lignification of a cellulose microfibril-based hydrogel and resulting effect on tensile properties
  9. Depolymerisation of kraft lignin to obtain high value-added products: antioxidants and UV absorbers
  10. A CP/MAS 13C NMR investigation of cellulose ultrastructure in traditional Chinese handmade papers
  11. Quality control of natural cork stoppers by image analysis and oxygen transmission rate
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 2.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/hf-2022-0083/pdf
Button zum nach oben scrollen