Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
The relationship found between fibre length and viscosity of three different commercial kraft pulps
-
Luc Lapierre
Veröffentlicht/Copyright:
7. Mai 2009
Abstract
In this report, two softwood kraft pulps, one originating from chips and the other from sawdust, and a hardwood kraft pulp originating from chips were fractionated individually with regard to fibre length using a Bauer-McNett apparatus. The fibre length, the coarseness, the 0.5% viscosity and the intrinsic viscosity were measured on all fractions and whole pulps. For every pulp, there was a unique positive relation between fibre length and viscosity, and also between fibre length and coarseness. Since fibre length has a direct impact on pulp strength, viscosity measurement can provide an indirect method to predict pulp strength. This relationship between the two datasets increases the value of viscosity as an analytical tool.
Keywords: Bauer-McNett; degree of polymerisation; fibre length; fractionation; hardwood; Kajaani; kraft pulps; softwood; viscosity
Received: 2008-10-20
Accepted: 2009-2-11
Published Online: 2009-05-07
Published Online: 2009-05-07
Published in Print: 2009-07-01
©2009 by Walter de Gruyter Berlin New York
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Original Papers
- 2D-NMR (HSQC) difference spectra between specifically 13C-enriched and unenriched protolignin of Ginkgo biloba obtained in the solution state of whole cell wall material
- Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes
- Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 2: Property predictions from colour changes
- The relationship found between fibre length and viscosity of three different commercial kraft pulps
- High-yield kraft pulping of Eucalyptus grandis Hill ex Maiden biotreated by Ceriporiopsis subvermispora under two different culture conditions
- Analysis of microwave vs. thermally assisted grafting of poly(methyl-vinyl ether co-maleic acid)-polyethylene glycol to birch kraft pulp
- Selective enzyme impregnation of chips to reduce specific refining energy in alkaline peroxide mechanical pulping
- Radical chain reactions in pyrolytic cleavage of the ether linkages of lignin model dimers and a trimer
- Quantitative chemical indicators to assess the gradation of compression wood
- Comparison of mechanical properties of thermally modified wood at growth ring and cell wall level by means of instrumented indentation tests
- Revisiting the transition between juvenile and mature wood: a comparison of fibre length, microfibril angle and relative wood density in lodgepole pine
- Characterization of the wood quality of pernambuco (Caesalpinia echinata Lam) by measurements of density, extractives content, microfibril angle, stiffness, color, and NIR spectroscopy
- An improved drying model for highly-impermeable hardwoods
- Neutron attenuation coefficients for non-invasive quantification of wood properties
- Topochemical investigations of cell walls in developing xylem of beech (Fagus sylvatica L.)
- Effects of substrate on laboratory spalting of sugar maple
- Short Notes
- Apigenin derivatives from Paulownia tomentosa Steud. var. tomentosa stem barks
- Forming limits for the bulk forming of solid wood
- Meetings
- Meetings
Schlagwörter für diesen Artikel
Bauer-McNett;
degree of polymerisation;
fibre length;
fractionation;
hardwood;
Kajaani;
kraft pulps;
softwood;
viscosity
Artikel in diesem Heft
- Original Papers
- 2D-NMR (HSQC) difference spectra between specifically 13C-enriched and unenriched protolignin of Ginkgo biloba obtained in the solution state of whole cell wall material
- Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 1: Colour evolution and colour changes
- Colour in thermally modified wood of beech, Norway spruce and Scots pine. Part 2: Property predictions from colour changes
- The relationship found between fibre length and viscosity of three different commercial kraft pulps
- High-yield kraft pulping of Eucalyptus grandis Hill ex Maiden biotreated by Ceriporiopsis subvermispora under two different culture conditions
- Analysis of microwave vs. thermally assisted grafting of poly(methyl-vinyl ether co-maleic acid)-polyethylene glycol to birch kraft pulp
- Selective enzyme impregnation of chips to reduce specific refining energy in alkaline peroxide mechanical pulping
- Radical chain reactions in pyrolytic cleavage of the ether linkages of lignin model dimers and a trimer
- Quantitative chemical indicators to assess the gradation of compression wood
- Comparison of mechanical properties of thermally modified wood at growth ring and cell wall level by means of instrumented indentation tests
- Revisiting the transition between juvenile and mature wood: a comparison of fibre length, microfibril angle and relative wood density in lodgepole pine
- Characterization of the wood quality of pernambuco (Caesalpinia echinata Lam) by measurements of density, extractives content, microfibril angle, stiffness, color, and NIR spectroscopy
- An improved drying model for highly-impermeable hardwoods
- Neutron attenuation coefficients for non-invasive quantification of wood properties
- Topochemical investigations of cell walls in developing xylem of beech (Fagus sylvatica L.)
- Effects of substrate on laboratory spalting of sugar maple
- Short Notes
- Apigenin derivatives from Paulownia tomentosa Steud. var. tomentosa stem barks
- Forming limits for the bulk forming of solid wood
- Meetings
- Meetings
